Shock absorber bearing

Front suspension bearing for:
- 911 from 1969 to 1989
- 912 from 1969
- 914

Suitable for:
- Golf 1 Berline & Cabriolet from 07/77->
- Golf 1 Caddy (pick-up)
- Jetta 1
- Scirocco 1 and 2

For Golf 4 and Bora,
2-wheel drive models only:
- until ->04/01 with reference code for rear axle: PR-1JA, 1JB, 1JD
- up to chassis ->1J-Y-530000 with reference code for rear axle PR-1JC, 1JH
- from 05/01-> with reference code for rear axle: PR-1JB, 1JD (not suitable for Variant)

For New Beetle type 1C, 9C:
- All models up to chassis ->1C-1-405000 and ->9C-1-603000

For New Beetle type 1Y:
- All models until ->06/05 with reference code for rear axle: PR-1JC

For Polo 9N1 and 9N3:
- All models

Rear linkage stop
Left or right-hand side, sold individually

Compatible with Seat Ibiza type 6L with suspension code:
- 1JB all-terrain equipment
- 1JE sport chassis

Suitable for:
- Golf 1 saloon from chassis 177 3551 889->
- Golf 1 cabriolet
- Golf 1 Caddy
- Passat 32B from chassis 537 2078 011->

Dust cover for the shock absorber rod for Polo 6N1

For Golf 4 Saloon and Break,
models in 2 WD only:
- from chassis 1J-Y-500001->,with suspension/rear axle code: 1JC, 1JH
- all models with chassis/rear axle code: UA9, UB1, UB2, UB3, UB6

Threaded bush/lock nut for suspension bearing on front shock absorber rod.

Compatible with Seat Ibiza type 6K until ->1994:
- 1.1 45hp (AAU) up to chassis ->6K-TR080000
- 1.3 55hp (2G, AAV) up to chassis ->6K-TR080000
- 1.4 60hp (ABD) up to chassis ->6K-TR080000
- 1.6 75hp (1F) up to chassis ->6K-TR080000
- 1.8 90hp (ABS) up to chassis ->6K-TR080000
- 1.8 16s 129hp (ADL) up to chassis ->6K-ZR082400 or ->6K-ZR599964
- 1.9 Diesel 64hp (1Y) up to chassis ->6K-TR080000
- 1.9 Turbo Diesel 75hp (AAZ) up to chassis ->6K-TR080000
- 2.0 115hp (2E) up to chassis ->6K-ZR082400 or ->6K-ZR599964

Suitable for :
- All Golf 2
- Golf 3 except GTi

Tapered washer in metal original type under bearing of rear suspension suitable for shock absorber rod diameter 10mm for BMW series 3 E36 Berline, Touring, Coupé and Cabrioletfrom 11/1989 to 10/1999:

- All gasoline and diesel models (including M3)

WARNING: Not suitable for the Compact version!

When changing yourshock absorbersand/or replacing your rear suspension bearings, it is imperative to replace and re-install the seat washer that is located under each of the bearings (see photo). Otherwise the silentblocks will come out of their housing and the shocks will go "through" the body, which can severely damage your vehicle.

Quantity needed: 2 per vehicle

This product is sold individually.

Tapered washer in metal original type under rear suspension bearing suitable for 10mm diameter shock absorber rod for BMW 3 Series E46 Berline, Compact, Touring, Coupé and Cabriolet from 04/1997 to 08/2006 :

- All gasoline and diesel models (including M3 and xi/xd 4-wheel drive)

When changing yourshock absorbersand / or replacing your rear suspension bearings, it is imperative to replace and re-install the seat washer that is located under each of the bearings (cf. photo). Otherwise the silentblocks will come out of their housing and the shocks will go "through" the body, which can severely damage your vehicle.

Quantity needed: 2 per vehicle

This product is sold individually.

Tapered washer in metal under bearing of rear suspension suitable for shock absorber rod diameter 10 mm type original for BMW series 5 E28 Sedan :

- 518 4cyl carbu manu 90hp from 11/1980 to 09/1984 (engine code M10B18)
- 518i 4cyl 105hp from 05/1981 to 12/1987 (engine code M10B18)
- 520i 6cyl 125hp from 11/1980 to 12/1987 (engine code M20B20)
- 525e 6cyl 2.7l 125hp from 11/1982 to 12/1987 (engine code M20B27)
- 525i 6cyl 150hp from 02/1981 to 11/1987 (engine code M30B25)
- 528i 6cyl 184hp from 09/1980 to 12/1987 (engine code M30B28)
- 535i 6cyl 218hp from 12/1984 to 12/1987 (engine code M30B34)
- M5 6cyl 3.5l 286hp from 10/1984 to 11/1987 (engine code M88/3)
- M535i 6cyl 218hp from 07/1984 to 12/1987 (engine code M30B34M)
- 524d 6cyl 84hp from 05/1986 to 12/1987 (engine code M21D24)
- 524td 6cyl 115hp from 10/1982 to 12/1987 (engine code M21D24T)

When installing yourshock absorbers and/or replacing your rear suspension bearings, it is imperative to replace and re-install the seat washers that are located under the bearings (see photo). Otherwise the silentblocks will come out of their housings and the shocks will go "through" the body, which can severely damage your vehicle.

Quantity needed: 2 per vehicle

This product is sold by the unit.

Conical metal washer under original type rear suspension bearing for BMW 6 Series :

Bmw E24 :

- 628 csi 184hp from 05/1982 to 05/1987 (engine code m30)
- 635 csi 218hp from 05/1982 to 04/1989 (engine code m30)
- M635 csi 286hp from 10/1983 to 02/1989 (engine code s38)

WARNING: Not suitable for the Compact version!

When changing your shock absorbers and/or replacing your rear suspension bearings, it is imperative to replace and reinstall the seat washer located under each bearing (see photo). Otherwise, the silentblocks will come out of their housings and the shock absorbers will pass "through" the body, which can cause serious damage to your vehicle.

Quantity required: 2 per vehicle

This product is sold individually.

Tapered washer in metal under bearing of rear suspension adapted for shock absorber rod diameter 10 mm original type for BMW Z4 E85 and E86 :

E85 Roadster :
- 2.0i 4 cyl 150hp phase 1 from 06/2004 to 12/2005 (engine code N46B20)
- 2.0i 4 cyl 150hp phase 2 from 01/2006 to 08/2008 (engine code N46B20)
- 2.2i 170hp phase 1 from 12/2002 to 11/2005 (engine code M54B22)
- 2.5i 192hp phase 1 from 04/2002 to 11/2005 (engine code M54B25)
- 2.5i 177hp phase 2 from 10/2004 to 07/2008 (engine code N52B25)
- 2.5si 218hp phase 2 from 10/2004 to 08/2008 (engine code N52B25)
- 3.0i 231hp phase 1 from 04/2002 to 11/2005 (engine code M54B30)
- 3.0si 265hp phase 2 from 10/2004 to 07/2008 (engine code N52B30)
- M 3.2l 343hp phase 2 from 11/2004 to 07/2008 (engine code S54B32)

E86 Coupe:
- 3.0si 265hp from 10/2005 to 08/2008 (engine code N52B30)
- M 3.2l 343hp from 10/2005 to 07/2008 (engine code S54B32)

When installing yourshock absorbersand/or replacing your rear suspension bearings, it is imperative to replace and re-install the seat washers that are located under the bearings (see photo). Otherwise the silentblocks will come out of their housings and the shocks will go "through" the body, which can severely damage your vehicle.

Quantity needed: 2 per vehicle

This product is sold by the unit.

Located under the front shock absorber bearing,

For Golf 1 and Scirocco :
- All models

Used to fix the suspension bearing in the engine compartment

Suitable for :
- Golf 3 since 1995
- Golf 4 1.4 75 cv
- Polo 6N & 6N2
- Corrado VR6
- Audi A3 8L series 1 & 2
- Audi A3 S3 serie 1, TT serie 1

Plastic suspension bearing gasket for Mazda MX-5 NA

This clear plastic gasket is located between the upper shock absorber bearing and the body. It prevents vibrations from the metal bearing rubbing against the chassis. Essential when reassembling your shock absorber.

- Suitable for both front and rear
- For MX-5 NA all models

Genuine Mazda part

Plastic suspension bearing gasket for Mazda MX-5 NB and NBFL

This gasket is located between the upper shock absorber bearing and the body. It prevents vibrations from the metal bearing rubbing against the chassis. Essential when reassembling your shock absorber.

- Suitable for both front and rear
- For MX-5 NB and NBFL all models

Genuine Mazda part

Upper front shock absorber support ring for Porsche 911 type 996 Carrera 2 from 1998 to 2005 :

- 996 phase 1 3.4 Carrera from 1998 to 2001
- 996 phase 2 3.6 Carrera from 2002 to 2005

The support ring is sold individually and two quantities are required per vehicle.