Stretcher

Pair of 20 mm Alu track wideners
for AUDI, VW and SEAT
Drilling 5 x 100mm and centering ring diameter 57.1 mm
Supplied with M14 x 1.5 long screws.

Allows 20 mm wheels to be extended outwards
giving your car a wider, sportier look.
High quality workmanship.

Pair of 25mm track wideners for Mazda MX-5 NC and NCFL

Increases your axle width by a total of 50mm
Centre distance 5 x 114.3
Front or rear axle

Comes with specific length studs

25mm thick 5x130 track widener for Porsche 911 type F from 1965 to 1973 :
- 911 2.0 from 1965 to 1967- 911 2.0 S from 1967- 911 2.0 T / L / S from 1968- 911 2.0 T / E / S from 1969- 911 2.2 T / E / S from 1970 to 1971- 911 2.4 T / E / S from 1972 to 1973- 911 2.7 Carrera RS from 1973
The widener is sold individually and with nuts.

Pair of aluminum shims for 2 4-hole rims
Centre distance: 4 x 130 mm
Widening per side: 6 mm
Supplied without screws (use with original bolts)

For VW with 4-hole discs and drums:
- Beetle, Karmann-Ghia, Buggy, since 08/1967->
- Type 3, Type 34, since 08/1965->

Pair of aluminium wheel expanders
Expansion per side: 20 mm
Centre distance: 5 x 112 mm
(T2, T3,T4, Audi, Mercedes wheels)
Exterior centering diameter: 66.60 mm
Interior centering diameter: 60 mm
Supplied with long spherical head bolts:
- 10 bolts with thread 12 x 50 mm
for:
- Transporter T25 / T3, 09/1979 ->07/1992

The M14 wheel bolts not supplied are suitable for the front, for the rear the 10 wheel studs must be replaced by longer models (KL30605 not supplied) and re-use the original nutsM14 x 1.5.

2 axle extensions 20 mm thick.

For 5 x 130 mm drill holes

Diameter of the centre: 71.6 mm

Front or rear 5mm aluminum track wideners with 4x100 drilling and M12x1.5 threading for MINI II R50, R53 Sedan and R52 Convertible until 07/2006:

R50 Sedan:
- Cooper 1.6L 116hp from 09/2000 to 07/2006 (engine code W10B16)
- One 1.6L 90hp from 09/2000 to 07/2006 (engine code W10B16)
- One D 1.4L 75hp from 06/2002 to 06/2004 (engine code W171ND-TV)
- One D 1.4L 88hp from 07/2004 to 07/2006 (engine code W171ND-TV)

R52 Cabriolet:
- Cooper 1.6L 116hp from 11/2002 to 07/2006 (engine code W10B16)
- Cooper S manu. 1.6L 163hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S 1.6L 170hp from 07/2004 to 07/2006 (engine code W11B16)
- Cooper S JCW 1.6L 200hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S JCW 1.6L 210hp from 07/2004 to 07/2006 (engine code W11B16)
- One 1.6L 90hp from 01/2003 to 07/2006 (engine code W10B16)

R53 Sedan :
- Cooper S manu. 1.6L 163hp from 10/2000 to 06/2004 (engine code W11B16)
- Cooper S 1.6L 170hp from 07/2004 to 07/2006 (engine code W11B16)
- Cooper S JCW 1.6L 200hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S JCW 1.6L 210hp from 07/2004 to 07/2006 (engine code W11B16)
- Cooper S JCW GP 1.6L 218hp from 03/2006 to 07/2006 (engine code W11B16)

Features:
- Without centering ring
- Materials: aluminum
- Track increase: 10mm per axle
- Center distance: 4x100
- Thread: M12x1.5
- Center bore: 56.1mm
- Suitable for front or rear wheel hubs

Wheel nuts are not included. When mounting widening shims, it is necessary to replace the original ones with longer versions (part numbers UL30618 or UL30619). If your vehicle is equipped with anti-theft wheel bolts you will also need to replace them (part number UL21080).

These wheel chocks allow them to extend 5mm outward which gives your car a wider, sportier look. Ideal when mounting short springs or threaded lowering combos.

High quality workmanship!

This product is sold as a pair.

10mm front or rear aluminum track wideners with 4x100 drilling and M12x1.5 thread for MINI II R50, R53 Sedan and R52 Convertible until 07/2006:

R50 Sedan:
- Cooper 1.6L 116hp from 09/2000 to 07/2006 (engine code W10B16)
- One 1.6L 90hp from 09/2000 to 07/2006 (engine code W10B16)
- One D 1.4L 75hp from 06/2002 to 06/2004 (engine code W171ND-TV)
- One D 1.4L 88hp from 07/2004 to 07/2006 (engine code W171ND-TV)

R52 Cabriolet:
- Cooper 1.6L 116hp from 11/2002 to 07/2006 (engine code W10B16)
- Cooper S manu. 1.6L 163hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S 1.6L 170hp from 07/2004 to 07/2006 (engine code W11B16)
- Cooper S JCW 1.6L 200hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S JCW 1.6L 210hp from 07/2004 to 07/2006 (engine code W11B16)
- One 1.6L 90hp from 01/2003 to 07/2006 (engine code W10B16)

R53 Sedan :
- Cooper S manu. 1.6L 163hp from 10/2000 to 06/2004 (engine code W11B16)
- Cooper S 1.6L 170hp from 07/2004 to 07/2006 (engine code W11B16)
- Cooper S JCW 1.6L 200hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S JCW 1.6L 210hp from 07/2004 to 07/2006 (engine code W11B16)
- Cooper S JCW GP 1.6L 218hp from 03/2006 to 07/2006 (engine code W11B16)

Features:
- Without centering ring
- Materials: aluminum
- Track increase: 20mm per axle
- Center distance: 4x100
- Thread: M12x1.5
- Center bore: 56.1mm
- Suitable for front or rear wheel hubs

Wheel nuts are not included. When mounting widening shims, it is necessary to replace the original ones with longer versions (part numbers UL30618 or UL30619). If your vehicle is equipped with anti-theft wheel bolts you will also need to replace them (part number UL21080).

These wheel chocks allow them to extend 10mm outward which gives your car a wider, sportier look. Ideal when mounting short springs or threaded lowering combos.

High quality workmanship!

This product is sold as a pair.

Pair of aluminum track widenersWidening per side: 15 mmCentre distance: 5 x 112 mm(T2, T3, T4, Audi, Mercedes wheels)Internal centering diameter: 57.1 mmSupplied with 10 long screws 12 x 50 mmwith spherical heads.
For VOLKSWAGEN Transporter T25 / T3 from 09/1979 to 07/1992
The 10 long screws 12x50mm are not suitable for the Transporter but for other vehicles of other makes with the same center distance, so it is necessary to order 10 wheel screws M14 not supplied for the front, and to replace the 10 rear wheel studs with longer models (KL30605 not supplied) and reuse the original M14 x 1.5 nuts.

These 20mm EIBACH track wideners erase the original gap between wheel and fender on your MX5.

The total axle widening of 40mm will improve the vehicle's handling.

Sold in pairs, complete with nuts and bolts.

2 axle extensions 5 mm thick.

For 5 x 130 mm drill holes

Diameter of the centre: 71.6 mm

10mm diametertrack widening shims with 4x108 center distance for Peugeot 205 all models
Set of 2 aluminum shims with 4x108 mm holes
For front or rear mounting on all Peugeot 205 models, including GTI, CTI, Rallye...
Sold without centering ringCenter bore: 65.1mm
Wheel nuts not included. When fittingwheel spacers , it is necessary to replace the original ones with longer versions.

2 14 mm thick track wideners.

For 5 x 130 mm holes

Center diameter: 71.6 mm

This pair of 25 mm aluminum track wideners for 5 x 205 wheels on Beetles with aluminum rims (07/1967-) comes complete with screws.
Centre distance: 5 x 205 mmWidth per side: 25 mmSupplied with 10 long tapered-head screws for 12 mm-diameter aluminum rims
For VW with 5-hole drums and aluminum rims:- Beetle, Karmann-Ghia, Buggy, up to ->07/1967- Combi Split, 1950 ->07/1967- Combi Bay Window, 08/1967 ->07/1970- Type 3, Type 34, until ->07/1965- Porsche 356

Pair of aluminum track wideners
Widening per side: 20 mm
Centre distance: 5 x 112 mm
(T2, T3, T4, Audi, Mercedes wheels)
Outside centering diameter: 66.60 mm
Inner centering diameter: 60 mm
Supplied with 10 long screws 12 x 50 mm
with spherical heads.

for Combi Bay Windows ,08/1970 ->07/1979

Caution! for Combi since 1971-> (chassis no. 211 2000 001->)
the screws supplied are not suitable for mounting, so replace the 20 wheel studs with longer ones (KL30605 not supplied) and use the original M14 x 1.5 nuts.

Pair of 20mm aluminium track wideners forBMW.
5x120mm drill holes and 74.1mm centring ring
Come with long M12x1.5 screws.

Widen the track between the wheels by 20mm
to make you car look wider and more sporty.
High-quality build

2 axle extensions 10 mm thick.

For 5 x 130 mm drill holes

Diameter of the centre: 71.6 mm

25mm thick 5x130 track widener for Porsche 911 type G from 1974 to 1989 :
- 911 2.7 from 1974 to 1977- 911 S 2.7 from 1974 to 1977- 911 Carrera 2.7 from 1974 to 1976- 911 Carrera 3.0 from 1976 to 1977- 911 SC 3.0 from 1978 to 1983- 911 Carrera 3.2 from 1984 to 1989
- 911 Turbo 3.0 from 1975 to 1977- 911 Turbo 3.3 from 1978 to 1989
The widener is sold individually and with nuts.

Pair of 20 mm aluminium axle spacers for BMW
5 x 120 mm holes and 72.6 mm centring diameter
Spacers sold without bolts

Allowing the wheels to come out by 20 mm
making your car look wider and sportier.
High-quality manufacturing

Pair of aluminum track widenersWidening per side: 17.5 mmCentre distance: 5 x 112 mm (T2, T3, T4, Audi, Mercedes wheels)Internal centering diameter: 57.1 mmSupplied with 10 M12 x 50 mm long screwswith spherical heads.
For VOLKSWAGEN Transporter T4 from 09/1990 to 06/2003
The 10 long M12 x 50 mm screws are not suitable for Transporters, but for other makes of vehicle with the same center distance, which is why it is necessary to order 10 M14 wheel screws for the front (not supplied), and to replace the 10 rear wheel studs with longer models (KL30605 not supplied) and reuse the original M14 x 1.5 nuts.