Floor

This front apron for 2CV A-AZ (07/1949-06/1959) is a high quality reproduction.

This firewall for 2CV A and AZ is of a higher quality than the original. Faithful in its design, it benefits from an electro-galvanized sheet metal of a quality unknown to the origin.It is compatible with all 2CV Sedans or Van before the modification of the heating and demisting system in May 1959.

Welded rear floor panel.
Located above the engine compartment.
With this repair element, you opt for an easier, faster and higher-quality restoration.
The sheet is protected by a weldable anti-rust primer which can be painted after a light sanding for adhesion.

For VW Combi Split Bus (03/1955-07/1963)

Due to its size, this item is available for pick-up at the Wambrechies store counter only. You can also send your transport for collection.

Driver's side quarter floor for welding to chassis.
Standard quality, supplied without seat rail.

For VW Karmann Ghia type 14 (08/1963-07/1974)

Under-chassis armor plate for VW Combi Bay Window from 1968 to 1971.
This plate is positioned under the chassis between the bumper and the front axle.

This complete trunk floor with corners for 2cv Sedan (02/1970-07/1990) is of a higher quality than the original.This trunk floor for 2CV is complete. Made of electro-galvanized steel, it integrates the trunk floor, the curve of the spare wheel, the top plate and the right and left corners already assembled.This repair item allows you to find a trunk floor like new.

Weld-on right rear crossmember plate for half floor pan.
Right side

For VW Beetle all models

DANSK front bulkhead without bumper moulding support for Porsche 911 type F from 1968 to 1973 :

- 911 2.0 T / L / S from 1968
- 911 2.0 T / E / S from 1969
- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973
- 911 2.7 Carrera RS from 1973

With hole for windshield washer reservoir.

This lower right rear closure repair sheet for 2CV Fourgonnette AK - 35cm is faithful to the original.

This right rear repair panel for 2CV Fourgonnette AK is of superior quality to the original. This electro-galvanized sheet metal is slightly thicker than the original and offers far superior protection against corrosion.

Compatible models :
- 2CV AK 350 type AK: 04/1963 to 07/1970
- 2CV AZU 250 type AZU-B/AK-AP: 01/1972 to 03/1978
- 2CV AKS type AK-AK: 07/1970 to 03/1978

This right-hand floor repair panel for Dyane cars and Acadiane - interior is superior quality.
Made of electro-galvanised steel and is higher quality than the original sheet metal.
For neatly repairing a damaged floor without having to replace it completely.

Ce dessous de plancher latéral gauche pour Renault 4 (10/1961-01/1994) est d'excellente qualité.

Cette tôle de réparation de plancher gauche pour R4 est en tôle électrozinguée, cette reproduction de qualité fabriquée en Europe offre une protection à la corrosion supérieure à la tôle d'origine.

This front crossmember screw for Meharis - 10X135mm is compatible with all models.

This front axle retainer screw is compatible with all models.
It allows the front axle to be attached to the chassis.

Pair of front half-planks for VW Combi Split pick-up double cab up to 07/1967.

This chassis repair sheet for 2CV Van (03/1951-03/1978)is of superior quality.

This chassis repair sheet for 2CV allows, without having to replace the entire chassis, to replace the top and bottom, front and rear sheets of a damaged chassis, regardless of model.

DANSK rear floor for Porsche 356 A :

- 356 A 1300 - 44 hp (506/1) from 1956 to 1957
- 356 A 1300 S - 60 hp (589/2) from 1956 to 1957
- 356 A 1600 - 60 hp (616/1) from 1956 to 1959
- 356 A 1600 S - 75 hp (616/2) from 1956 to 1959

Without brackets

This complete trunk floor with corners for 2cv A-AZ-AZAM (07/1949-02/1970) is of a higher quality than the original.This trunk floor for 2CV is complete. Made of electro-galvanized steel, It integrates the trunk floor, the curve of the spare wheel, the top plate and the right and left corners already assembled. This repair element allows you to find a trunk bottom like new.

This beam under seat for 2CV (02/1970-07/1990) is a superior quality part.This complete step under seat for 2CV is faithful to the original. Made of electro-galvanized steel of a higher quality than the original, it allows you to find a solid rear seat support for many years.

This left-hand side floor panel for DYANE (03/1968-08/1983) is faithful to the original.

This left half floor for Dyane with 110mm diameter suspension cylinders is reinforced and includes the seat adjustment rails and the securing for the safety belts. Made of electro-galvanised steel, it offers superior corrosion protection to the original floors.

This right side floor for 2cv A-AZ (07/1949-02/1970) is of superior quality.

Perfectly faithful to the original, this right side floor for 2CV old is compatible with small pot suspension. Made of electro-galvanized steel, its manufacturing quality is superior to the original floor.

This left-hand side floor for AMI6 and AMI8 cars is faithful to the original.

This left half floor for AMI6 and AMI8 cars with 130mm diameter suspension cylinders is reinforced and includes the seat adjustment rails and the seatbelt attachment. Made of electro-galvanised steel, it has superior corrosion protection to the original floors.

Tôle de plancher sous siège avant gauche pour VW Combi Split Brésilien de 1957 à 1975.