Lambda sensor

18x24mm aluminium gasket for UC10100BL Lambda sensor cap

Dimensions 18x24mm

For Golf 3 and Vento:
- 2.0 115hp (ADY, AGG, AKR)

For Polo Classic 6V2:
- 1.6 100hp (AFT)

For Passat 3 (35i):
- 2.0 107hp and 115hp (AEP, AEP, AGG)

Lambda sensor hole screw for Porsche 911 type 993 from 1994 to 1998 :
- 993 3.6 - 272hp (M64.05/06/07/08) Carrera from 1994 to 1995- 993 3.6 - 272hp (M64.05/07) Carrera 4 from 1995- 993 3.6 - 285hp (M64.21/22/23/24) Carrera and Carrera S from 1996 to 1998- 993 3.6 - 285hp (M64.21/23) Carrera 4 and Carrera 4S from 1996 to 1998- 993 3.8 - 300hp (M64.20) Carrera RS from 1995 to 1996
- 993 3.6 - 408hp (M64.60) Turbo from 1995 to 1998- 993 3.6 - 450hp (M64.60S) Turbo S from 1997 to 1998
The screw is sold individually and only one quantity is required.

Lambda sensor for Bmw 7 Series E38:

Bmw 7 Series E38 :

- 728i 6cyl 193hp from 09/1998 to 07/2001 (engine code m52b28tu)
- 728iL 6cyl 193hp from 09/1998 to 07/2001 (engine code m52b28tu)
- 735i 8cyl 236hp from 09/1998 to 07/2001 (engine code m62b35)
- 735iL 8cyl 236hp from 09/1998 to 07/2001 (engine code m62b35)
- 740i 8cyl 286hp from 09/1998 to 07/2001 (engine code m62b44)
- 740iL 8cyl 286hp from 09/1998 to 07/2001 (engine code m62b44)
- 750i 12cyl 326hp from 11/1993 to 07/1998 (engine code m73)
- 750i 12cyl 326hp from 03/1998 to 07/2001 (engine code m73n)
- 750iL 12cyl 326hp from 01/1994 to 08/1998 (engine code m73)
- 750iL 12cyl 326hp from 09/1998 to 07/2001 (engine code m73n)
- 750iLS 12cyl 326hp from 03/1995 to 08/1998 (engine code m73)
- 750iLS 12cyl 326hp from 08/1998 to 07/2001 (engine code m73n)
- 750iLP 12cyl 326hp from 10/1998 to 07/2001 (engine code m73n)
- 750i Limousine 12hp 326hp from 07/1996 to 08/1998 (engine code m73)
- 750i Limousine 12cyl 326hp from 08/1998 to 07/2001 (engine code m73n)

Not suitable for Bmw 7 Series E38 728i engine code m52b28 and 730/740i v8 engine code m60.

Tip: to find out whether the cause of your vehicle's excessive pollution is due to the Lambda sensor(s), have a diagnostic test (using a suitcase) carried out by your garage.
Mecatechnic does not accept the return of sensors with traces of assembly. Thank you for your understanding.

Lambda sensor pre-catalyst sensor / before catalyst BOSCH for Porsche 911 type 996 :

- 996 phase 2 3.6 - 320 hp (M96.03) Carrera from 2002 to 2005
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera 4 from 2002 to 2005
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera 4S from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera 4 from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera 4S from 2002 to 2005
- 996 phase 2 3.6 GT3 - 380 hp (M96.79) from 2004 to 2005
- 996 phase 2 3.6 GT3 RS - 380 hp (M96.79) of 2004

Quantity present on the car : 2

Sold individually

For Saloon:
-530i M60

2 required per vehicle, fit to the catalytic converters
Recommended replacement interval: 100,000 km

Oxygen sensor, located on the exhaust manifolds,

For Saloon, Touring, Coupé & Convertible ->09/95:
- 320 i M52
- 323i M52 (except Touring)
- 328 i M52

Regulating sensor located downstream of the catalytic converter,

For Saloon (8E2) and Avant (8E5):
- 1.8 T 150hp (AVJ) including Quattro
- 1.8 T 163hp (BFB) including Quattro
- 1.8 T 170hp (AMB)
- 1.8 T 190hp (BEX) including Quattro
- 2.0 130hp (ALT)
- 2.0 FSI 150hp (AWA)
- 2.4 163hp (AMM)
- 2.4 170hp (BDV)
- 3.0 218hp (BBJ) including Quattro
- 3.0 220hp (ASN, AVK) including Quattro

Denso Lambda sensor for Mercedes C Class 200 - 230 kompressor type W202
Denso model DOX-1183
Assignments :- C 200 2.0 Kompressor (202.025) from 10.1995 to 05.2000, 1998 ccm, 180 HP- C 200 2.0 Kompressor (202.025) from 11.1996 to 05.2000, 1998 ccm, 192 HP- C 230 2.3 Kompressor (202.024) from 10.1995 to 05.2000, 2295 ccm, 193 HP

This lambda sensor for Volkswagen Beetle 1600 injection Mexico from 1992 - 3 wires is essential for electronic injection management.

This oxygen sensor is located directly on the exhaust to control the air/fuel mixture and regulate injection in real time. 3-wire model.

For VW Beetle Mexico
Years : since 10/1992->
Engine 1600cc injection 46hp (ACD)
since chassis N° 11-P-000 001->

Lambda sensor pre-catalyst sensor / before catalyst BOSCH for Porsche 911 type 996 Turbo and GT2 :

- 996 3.6 Turbo - 420 hp (M96.70) from 2000 to 2005
- 996 3.6 Turbo X50 - 450 hp (M96.70) from 2001 to 2005
- 996 3.6 Turbo S - 450 hp (M96.70) of 2005
- 996 3.6 GT2 - 462 hp (M96.70SL) from 2001 to 2004
- 996 3.6 GT2 - 483 hp (M96.70SL) of 2005

Quantity present on the car : 2

Sold individually

For Polo 6N1 from chassis -> 6N-V-350000:
- 1.0 50hp (AER)

For Polo Classic 6V2:
- 1.4 60hp (AEX)up to chassis->6K-V-060000
- 1.6 75hp (AEE, ALM, 1F)

Bosch lambda sensor for Bmw 7 Series:

- Compatible with Bmw 7 Series E32 type 730i and 735i versions from 10/1985 to 09/1987 with catalyzed 6-cylinder gasoline engine code m30.

For Passat 3 from chassis 3A-S-075001->:
-1.875hp and 90hp (AAM, ADZ)

For Passat 4:
- 2.8 180hp and 193hp(AGE,ACK, AQD)

MEYLE Lambda sensor before catalytic converter for Audi TT (8J)
For Audi TT (8J) :- 1.8 TFSI 160hp (CDAA)- 2.0 TFSI 200hp (CCZA)- TTS Quattro 256hp (CDLC, CRZA)- TTS Quattro 265hp (BHZ, CDLA)
Probe positioned upstream of catalytic converterWith thermal protection on harness
Original MEYLE quality

For Golf 4:
- 1.6 100hp (AEH and AKL with manual gearbox) since chassis 1J-X-132 001->

Lambda sensor hole screw for Porsche 911 type 996 GT3 and GT3RS from 2000 to 2005 :
- 996 phase 1 3.6 GT3 - 360 hp (M96.76) from 2000 to 2001- 996 phase 2 3.6 GT3 - 380 hp (M96.79) from 2004 to 2005- 996 phase 2 3.6 GT3 RS - 380 hp (M96.79) from 2004
The screw is sold individually and two quantities are required.

BOSCH Lambda Probe for Peugeot 205

This BOSCH Lambda Probe for Peugeot 205 is only suitable for the models below:

Peugeot 205 Cabriolet

- 205 CJ 1.1 L - 60hp from 10/1989 to 12/1994
- 205 CJ 1.4 L - 75hp from 05/1991 to 12/1994
- 205 CJ 1.6 L - 88hp from 08/1992 to 12/1994

Peugeot 205 Phase II, 3 and 5 doors versions

- 205 1.0 L - 50hp from 08/1992 to 05/1997
- 205 1.1 L - 60hp from 07/1989 to 09/1998
- 205 1.4 L - 75hp from 07/1988 to 09/1998
- 205 1.4 L - 75hp from 08/1990 to 07/1998
- 205 1.6 L - 90hp from 08/1990 to 07/1992
- 205 Automatic 1.6 L - 88hp from 05/1990 to 09/1998
- 205 1.9 L - 121hp from 08/1990 to 05/1997
- 205 GTI 1.9 L - 120hp from 10/1987 to 10/1994
- 205 GTI 1.9 L - 128hp from 10/1987 to 09/1998

Peugeot 205 Utility

- 205 Van 1.1 L - 60hp from 08/1990 to 05/1997

Replacement of the lambda sensor is advised by interval of 100,000 km.

Lambda sensor for Mazda MX-5 NC and NCFL

For NC and NCFL 1.8L and 2.0L from chassis No.159284
Located upstream of the exhaust manifold (shortest)

Original Made in Japan DENSO mount
Connection and wiring identical to the original

The lambda sensor detects the oxygen content in the exhaust gasesand allows the ECU to precisely adjust the air/petrol mixture injected into the engine.
A defective sensor will falsify the mixing values and may lead to increased consumption and pollution!

For Golf 2 Syncro (4 x 4):
- 1.8 G60 160hp (PG)

For Passat 3 Syncro (4 x 4),
with catalytic converter:
- 1.8 G60 160hp (PG)
- 2.0 115hp (2E)