Inlet manifold

Central part of the pipe for 34 PICT carburettor

For VW Cox, Karmann-Ghia, Combi, 181...
with 1600 dual intake engine and single heater

Adaptable to Combi with servo-brake by drilling the pipe for the vacuum hose.

Original "single intake " manifold for VW Cox and Combi 1200 engines

Original "single intake " manifold for VOLKSWAGEN Combi Split Brazil (1957-1975)

Center pipe for 30/31 PICT carburetor
For 1300 AB engines with dual intake and single heater.
We strongly recommend that you also take a carburettor riser part no. "VC70520", as the carburettor can sometimes touch the dynamo or alternator.

Clamp collar for50 mm or Turbo intake pipes
Sold per unit.

For Transporter T25/T3, 05/1979 ->07/1992:
- 1600 Petrol (CT) 1 on hot air hose
- 1900 Petrol (DF, DG) 4 on air flow meter & hose
- 1600 Turbo-Diesel 70hp (JX) 1 hose coupling on Turbo

Fixing clamps for a rubber sleeve on intake manifolds.
Kit of 1 small 1 large for left or right side of intake manifold.

For VW :
- Cox, Karmann, Combi, 181
with Type 1 double intake engine, 1300

Original single-intake pipe with preheating, without engine speed limiter.
For type 1 engines: 1500cc (42hp), Industrial 126/A.
Original Volkswagen Classic Parts.

For VW Kombi Split 1500 42hp

Clamp collar for the 70 mm or Turbo intake pipe
Sold per unit.

For Transporter T25/T3, 05/1979 ->07/1992:
- 1600 Petrol 50hp(CT) 2 on air box &intake pipe
- 2000 Petrol 70hp (CV) 2 on butterfly valve & air flow meter
- 1600 Turbo-Diesel 70hp (JX) 5 on & air box intake pipe
- 1600 Turbo-Diesel 70hp (JX) 1 hose coupling on Turbo

90° sleeve at the end of the brake booster vacuum pipe on inlet pipe of Type 4 engine 1.7L. 8/10mm.
2 parts required, sold per unit.

For Combi Bay Window, with Type 4 engine:
- 1700cc 66hp (CA) 08/1971 ->07/1973
- 1700cc 62hp (CB) 08/1971 ->12/1973
+ 412

90° elbow at the end of the brake booster vacuum hose on the intake pipe of the Type 4 2.0L engine. Need 1 piece.
For VW Transporter T25 / T3 from 05/1979 to 12/1982 with Type 4 2000cc 70hp petrol engine (CU).

Air intake system cap for 2.1L Water boxer engine. Original Volkswagen Classic Parts.

For VW Transporter T25/T3
2100cc water-cooled petrol engines: DJ, MV, SR
Years: 08/1985 -> 07/1992
Chsssis: from no. G-000 001->
Including Syncro version (4 x 4).

Air supply hose from airbox to intake manifold for VOLKSWAGEN Transporter T25 :
- 1.9 petrol 60hp (DF)
- 1.9 petrol 78hp (DG)

Metal gasket between intake manifold and cylinder head.
Need 2, sold individually.

For VW :
- Cox, Karmann-Ghia, Combi
engines : 1300

Rubber bellows for connection and sealing between center pipe and side intake manifolds on Type 1 1300 and 1600cc engines.Sold individually.
For :- VW Cox, Karmann-Ghia, Combi engines: 1300 and 1600cc double intake.

Seal between the carburettor and inlet manifold.
Original Volkswagen Classic Parts.

For Transporter T25 / T3, 05/1979 ->12/1982
Engines: 1600cc petrol 50hp types CT, CZ.

Kit of 6 insulating seals for small cooling panels around the intake pipe reheating pipe.

For Type 1 engines, single or twin intake.
Not suitable for 1300 type AR engine.

This set of intake pipes enable Weber 40 IDF carburettors to be fitted on a Porsche 356 with Zenith carburettors.

OE or OE type electric heated intake manifold for VW Cox
Production by BBT
- All Type 1 engines
Can be adapted to other intake pipes if diameter and length allow.
Simple connection:
The fuse wire with the flat lug is connected to the coil, and the wire with the round lug is connected to a stud or a screw on the motor plate for ground.

- Works on 6 or 12 volts.

Electric heated ammission pipe sleeve original or original type for VW Combi Bay Window from 1968 to 1979:
- All engines Type 1
It is possible to adapt it on other amission pipes if the diameter and length allow it.

Electric heated ammission pipe sleeve original or original type for VW Combi Split from 1950 to 1967:
- All engines Type 1
It is possible to adapt it on other amission pipes if the diameter and length allow it.