Coil over suspension kit

REDLINE threaded shock absorber kit for Volkswagen Golf 5
For VW Golf 5 : - 4Motion all petrol and diesel models- Golf 5 Variant TDI only- Golf 5 Plus TDI only
Height-adjustable up to -20 to -60 mm at the front and -30 to -60 mm at the rearThese shock absorbers are height-adjustable by means of a thread on the lower part of the spring, on the shock absorber body.
TÜV approved

Complete MTS TECHNIK Street Series height-adjustable threaded combination suspension kit for BMW 3 Series E36 Compact with standard or M-Technic chassis:

- All 4- and 6-cylinder petrol and diesel models

ATTENTION: Not suitable for Sedan, Touring, Coupé and Cabriolet!

Kit includes :
- 2 front twin-tube gas-hydraulic shock absorbers adjustable from -20mm to -90mm
- 2 rear twin-tube gas-hydraulic shock absorbers, adjustable from -10mm to -40mm
(Lowering values given as an indication with standard chassis as reference)
- 4 springs
- Stops and dust covers
- Adjusting wrench
- Top mounting nuts and washers

This MTS Technik kit is assembled with main springs manufactured by EIBACH and developed in 3 versions (Street, Comfort and Sport). The springs in this Street Series kit strike the perfect balance between comfort and sportiness.

These shock absorbers are twin-tube gas-hydraulic versions. Pressurized gas acts directly on the hydraulic fluid, eliminating the "foaming" effect of oil (an undesirable phenomenon typical of oil dampers), for maximum efficiency.
Their setting is fixed, not adjustable in hardness.
Shock absorber bodies are galvanized for corrosion resistance and longevity.

Front and rear suspension bearings are not included.
It is advisable to replace them with new ones when changing suspensions.
The bearing anchorage area on the top of the front shock absorber rods is designed for standard mounting on original bearings.

Depending on your lowering settings and the type of rims used, you may need to replace your sway bar links with adjustable models (part no. BJ42243) and fit spacers for a perfect fit.

This kit comes with a 2-year manufacturer's warranty.

Give your E36 the very best, with a top-quality MTS TECHNIK kit!

For A3 (8L) and S3 (8L), 4-wheel drive version only

Lowering front / rear: -25 mm to -50 mm

REDLINE threaded shock absorber kit for Volkswagen Touran (1T)
For VW Touran (1T) all petrol models from 2003 to 2015
Height-adjustable down to -20 to -60mm at front and -30 to -60mm at rearThese shock absorbers are height-adjustable by means of a thread on the lower part of the spring, on the shock absorber body.
TÜV approved

For S4 (B5) Saloon and Avant

Front / rear lowering: -40 mm and -75 mm

Blue Line threaded combination kit for Mini :
Mini R55 Clubman :
- Cooper 1.6L 120hp from 10/2006 to 07/2010 (engine code N12B16)- Cooper S 1.6L 175hp from 10/2006 to 07/2010 (engine code N14B16)- Cooper S JCW 1.6L 211hp from 11/2007 to 07/2010 (engine code N14B16)- Cooper d 1.6L 109hp from 11/2006 to 07/2010 (engine code W16D16)- One 1.4L 95hp from 08/2008 to 02/2010 (engine code N12B14)- Cooper 1.6L 122hp from 03/2009 to 06/2014 (engine code N16B16)- Cooper S 1.6L 184hp from 06/2009 to 06/2014 (engine code N18B16)- Cooper S JCW 1.6L 211hp from 01/2010 to 06/2012 (engine code N14B16)- Cooper S JCW 1.6L 211hp from 11/2011 to 06/2014 (engine code N18B16)- Cooper SD 2.0L 143hp from 05/2009 to 06/2014 (engine code N47C20)- Cooper D 1.6L 112hp from 04/2009 to 06/2014 (engine code N47C16)- Cooper D 2.0L 112hp from 11/2010 to 06/2014 (engine code N47C20)- One 1.6L 98hp from 03/2009 to 06/2014 (engine code N16B16)- One D 1.6L 90hp from 01/2010 to 06/2014 (engine code N47C16)
Worth knowing:
- Front and rear adjustment range from 25 to -55 mm

REDLINE threaded shock absorber kit for Volkswagen Golf 7
For VW Golf 7 sedan all models with torsion rear axle and front axle with maximum load 965kg
On the Golf 7, smaller engines have a torsion rear axle, while more powerful engines have a multi-link rear axle. We recommend that you check this on your vehicle before ordering.
The permissible front load can be found on the vehicle's tare plate.
Not suitable for models equipped with DCC (Electronic Suspension Control)
Height-adjustable to -35 to -65mm at front and -40 to -65mm at rearThese shock absorbers are height-adjustable by means of a thread on the lower part of the spring, on the shock absorber body.
TÜV approved

REDLINE threaded shock absorber kit for Audi A4 (B6)
For Audi A4 (B6) saloon all petrol and diesel models except QuattroNot suitable for Quattro and Estate versions
Height-adjustable to -30 to -60mm at front and -40 to -60mm at rearThese shock absorbers are height-adjustable by means of a thread on the lower part of the spring, on the shock absorber body.
Galvanized shock absorbers with powder-coated cold-coiled springs
TÜV-approved

Complete MTS TECHNIK Street Series height-adjustable threaded combination suspension kit for BMW 3 Series E30 Sedan, Touring, Coupé and Cabriolet 4 and 6 cylinders with standard or M-Technic chassis and 45mm diameter strut:

- All petrol and diesel models with or without ABS

ATTENTION: Not suitable for M3 and ix 4-wheel drive versions!

Kit includes:
- 2 front twin-tube gas-hydraulic shock absorbers adjustable from -25mm to -90mm (with adjustable suspension bearings)
- 2 rear twin-tube gas-hydraulic shock absorbers adjustable from -25mm to -60mm
(Lowering values given as an indication with standard chassis as reference)
- 4 springs
- Stops and dust covers
- Adjusting wrenches
- Top mounting nuts and washers

This MTS Technik kit is assembled with main springs manufactured by EIBACH and developed in 3 versions (Street, Comfort and Sport). The springs in this Street Series kit strike the perfect balance between comfort and sportiness.

These shock absorbers are twin-tube gas-hydraulic versions. Pressurized gas acts directly on the hydraulic fluid, eliminating the "foaming" effect of oil (an undesirable phenomenon typical of oil dampers), for maximum efficiency.
Their setting is fixed, not adjustable in hardness.
Height adjustment is independent of spring preload and therefore does not interfere with spring characteristics. This ensures high-performance damping right down to the lowest levels of lowering.
Adjustable spring cups enable custom camber adjustment.
shock absorber bodies are galvanized for corrosion resistance and longevity.

INFORMATION: original front struts must be modified for installation (installation manual supplied). Depending on the lowering value adopted and the type of rims used, adjustable spacers and sway-bar links (part no. BJ42243) may be required.

This kit comes with a 2-year manufacturer's warranty with no mileage limit.

Give your E30 the very best, with a top-quality MTS TECHNIK kit!

For A4 (B5) Saloon & Avant (Estate) 04/94 ->06/01
except Quattro (4 x 4)
- 1.6
- 1.8
- 1.8 20V Turbo
- 1.9 TDi
- 2.4 V6
- 2.5 V6 TDi
- 2.6 V6
- 2.8 V6

Complete MTS TECHNIK Comfort Series height-adjustable threaded combination suspension kit for BMW 3 Series E30 Sedan, Touring, Coupé and Cabriolet 4 and 6 cylinders with standard or M-Technic chassis and 45mm diameter strut:

- All petrol and diesel models with or without ABS

ATTENTION: Not suitable for M3 and ix 4-wheel drive versions!

Kit includes:
- 2 front twin-tube gas-hydraulic shock absorbers adjustable from -25mm to -90mm (with adjustable suspension bearings)
- 2 rear twin-tube gas-hydraulic shock absorbers adjustable from -25mm to -60mm
(Lowering values given as a guide with standard chassis as reference)
- 4 springs
- Stops and dust covers
- Adjusting wrenches
- Top mounting nuts and washers

This MTS Technik kit is assembled with main springs manufactured by EIBACH and developed in 3 versions (Street, Comfort and Sport). The springs in this Comfort Series kit have been specially designed to maintain maximum suspension comfort in all circumstances, without sacrificing roadholding.

These shock absorbers are twin-tube gas-hydraulic versions. Pressurized gas acts directly on the hydraulic fluid, eliminating the "foaming" effect of oil (an undesirable phenomenon typical of oil dampers), for maximum efficiency.
Their setting is fixed, not adjustable for hardness.
Height adjustment is independent of spring preload and therefore does not interfere with spring characteristics. This ensures high-performance damping right down to the lowest levels of lowering.
Adjustable spring cups enable custom camber adjustment.
shock absorber bodies are galvanized for corrosion resistance and longevity.

INFORMATION: a modification of the original front struts will be required for installation (installation manual supplied). Depending on the lowering value adopted and the type of rims used, adjustable spacers and sway bar links (part no. BJ42243) may be required.

This kit comes with a 2-year manufacturer's warranty with no mileage limit.

Give your E30 the very best, with a top-quality MTS TECHNIK kit!

For all models from 04/02 up to ->07/06

Adjustable drop:
-20 mm to -50 mm at the front
-20 mm to -50 mm at the rear
Fixed calibration, hardness not adjustable.

REDLINE threaded shock absorber kit for Volkswagen Golf 6
For VW Golf 6 :- Golf 6 Plus Petrol only
Height-adjustable to -20 to -60mm at front and -30 to -60mm at rearThese shock absorbers are height-adjustable by means of a thread on the lower part of the spring, on the shock absorber body.
TÜV approved

Complete MTS TECHNIK Sport Series height-adjustable threaded combination suspension kit with lowering stabilizer links for BMW 3 Series E46 4 and 6-cylinder petrol or diesel engines with standard or M-Technic chassis:

- Sedan and Touring from 04/1997 to 05/2005
- Coupé and Cabriolet from 03/1998 to 08/2006
- Compact from 01/2001 to 12/2004

ATTENTION: Not suitable for M3 or xi/xd 4-wheel drive versions!

Kit includes :
- 2 front twin-tube gas-hydraulic shock absorbers, adjustable from -20mm to -70mm
- 2 rear twin-tube gas-hydraulic shock absorbers, adjustable from -20mm to -65mm
(Lowering values given as an indication with standard chassis as reference)
- 4 springs
- Stops and dust covers
- 2 stabilizer bar links for lowering
- 1 adjustment wrench
- Top mounting nuts and washers

This MTS Technik kit is assembled with main springs manufactured by EIBACH and developed in 3 versions (Street, Comfort and Sport). The springs in this Sport Series kit have been specially designed to offer maximum sportiness without compromise, the ideal cocktail for club outings or track days.

These shock absorbers are twin-tube gas-hydraulic versions. Pressurized gas acts directly on the hydraulic fluid, eliminating the "foaming" effect of oil (an undesirable phenomenon typical of oil dampers), for maximum efficiency.
Their setting is fixed, not adjustable in hardness.
Shock absorber bodies are galvanized for corrosion resistance and longevity.

Front and rear suspension bearings are not included.
It is advisable to replace them with new ones when changing suspensions.
The bearing anchorage area on the top of the front shock absorber rods is designed for standard mounting on original bearings.

Depending on your lowering settings and the type of rims you're using, you may need to fit spacers for perfect mounting.

This kit comes with a 2-year manufacturer's warranty.

Give your E46 the best, with a top-quality MTS TECHNIK kit!

Thisrear axle lowering spacer for VW caddy - 1cm is made by MECATECHNIC.

This rear axle spacer lowers the rear of VW caddy MK1s by an additional 1cm in addition to the GJ76128 kit.

Pre-drilled holes allow you to align the spacers with the kit plate using the screws provided.

Drill and tap using the screws available (minimum 4mm FHC or FS countersunk head screws).

For TT(8N) 3.2 V6

Lowering front / rear: -25 mm to -50 mm

Threaded combination kit for Bmw 5 Series:
- Compatible with all Bmw 5 Series E60 Sedan versions from 07/2001 to 09/2010.
Please note:
- Not suitable with air suspension option.
- Not suitable for 4-wheel drive models type ix and xd.
-Shock absorber cups not included, original mountings compatible.
Kit includes :
- 2 front shock absorbers adjustable up to -70mm.- 2 rear shock absorbers adjustable up to -70mm.- 4 springs.- Adjustment wrench.

Blue Line threaded combination kit for Mini :
R50 Saloon :
- Cooper 1.6L 116hp from 09/2000 to 11/2006 (engine code W10B16)- One 1.6L 90hp from 09/2000 to 11/2006 (engine code W10B16)- One D 1.4L 75hp from 06/2002 to 06/2004 (engine code W171ND-TV)- One D 1.4L 88hp from 07/2004 to 07/2006 (engine code W171ND-TV)
R52 Cabriolet :
- Cooper 1.6L 116hp from 11/2002 to 07/2008 (engine code W10B16)- Cooper S manu. 1.6L 163hp from 11/2002 to 06/2004 (engine code W11B16)- Cooper S 1.6L 170hp from 07/2004 to 07/2008 (engine code W11B16)- Cooper S JCW 1.6L 200hp from 11/2002 to 06/2004 (engine code W11B16)- Cooper S JCW 1.6L 210hp from 07/2004 to 07/2008 (engine code W11B16)- One 1.6L 90hp from 01/2003 to 07/2008 (engine code W10B16)
R53 Cooper S :
- Cooper S manu. 1.6L 163hp from 10/2000 to 06/2004 (engine code W11B16)- Cooper S 1.6L 170hp from 07/2004 to 11/2006 (engine code W11B16)- Cooper S JCW 1.6L 200hp from 11/2002 to 06/2004 (engine code W11B16)- Cooper S JCW 1.6L 210hp from 07/2004 to 11/2006 (engine code W11B16)- Cooper S JCW GP 1.6L 218hp from 03/2006 to 09/2006 (engine code W11B16)
Worth knowing:
- Front and rear adjustment range from 25 to -55 mm

Blue Line threaded combination kit for Bmw 3 Series:
- Compatible with all Bmw 3 Series E30 Sedan, Touring, Baur, Coupé and Cabriolet versions from 07/1982 to 08/1994 except 4-wheel drive ix model.
Please note
- Not suitable for sport versions type M3 E30 engine code s14.
- Only suitable with 51mm front strut .
- Threaded combination kit adjustable between -40 and -60mm.

Blue Line threaded combination kit for Bmw 3 Series:
- Compatible with all Bmw 3 Series E46 Sedan, Touring, Compact, Coupé and Cabriolet versions from 07/1997 to 09/2006 except 4-wheel drive and sports chassis option code S226A.
Good to know:
- Front adjustment range between 40 and 65mm.
- Rear adjustment range from 30 to 60mm.
- The kit is supplied without upper suspension bearings .