Gearbox linkage

The linkage is a set of arms and cables which connect various moving parts of the vehicle, enabling movements to be transmitted and actions such as gear changes to be controlled.The bushing on the undercarriage gearboxlinkage is a wearing part and must be replaced.This plastic bush is suitable for VW :- Combi Split from 08/1966 to 07/1967- Combi Bay Window from 08/1967 to 07/1973 up to chassis no. 213 2300 000.

Metal coupling sleeve between front and rear gearbox linkages under chassis. Comes without clamp bolt (ref.: VS00105).

For Combi Split, 1950 ->08/1961
up to chassis No. ->835 087.

Bearing bushing on gearbox linkage under chassis
Plastic linkage retaining ring.
Sold per unit, 1 or 2 required according to year for:
- Combi Split, 1962 ->1967, x 2 parts, front + rear
- Combi Bay Window, 08/1967 ->10/1977, x 1 part, rear
up to chassis No. ->217 2053 838.
- Combi Bay Window, 11/1977 ->07/1979, x 2, centre + rear
since chassis no. 217 2053 839->

Bushing on gearbox linkage under chassis
Plastic retaining ring at the centre of the linkage.
Comes with the clip.

For Combi Bay Window, all models 08/1967 ->07/1979

Bushing on gearbox linkage under chassis
Plastic retaining ring at the centre of the linkage.
Comes with the clip. Superior Original VW quality.

For Combi Bay Window, all models 08/1967 ->07/1979

Bearing bushing on gearbox linkage under chassis
Plastic retaining ring, guides the front of the linkage.

For Combi Bay Window, 08/1973 ->07/1979
since chassis no. 214 2000 001->

Locking cotter pin on hemispherical bushing for gear lever. 2 required, soldper unit.

For VW Transporter T25/T3/Bus, 05/1979 ->07/1992
All Petrol engine models & Diesel.

Metal coupling sleeve between front and rear gearbox linkages under chassis. Comes without the clamp bolt (ref.: VS00105).

For:
- Combi Split, 09/1961 ->07/1967
since chassis no. 835 088->
- Combi Bay Window, 08/1967 ->07/1979

Cup on hemispherical bushing for gear lever.

For VW Transporter T25/T3/Bus, 05/1979 ->07/1992
All Petrol engine models & Diesel.

Gearshift stop plate for Porsche 914 from 1970 to 1976 :

- 914-4 1.7 - 80 hp (022-W) from 1970 to 1973
- 914-4 1.7 - 80 hp (022-EA) from 1972 to 1973
- 914-4 1.7 - 72 hp (022-EB) from 1972 to 1973
- 914-4 1.8 - 85 hp (021-AN) from 1974 to 1976
- 914-4 1.8 - 76 hp (022-EC) from 1974 to 1976
- 914-4 2.0 - 95 hp (039-GA) from 1973 to 1974
- 914-4 2.0 - 100 hp (039-GB) from 1973 to 1976
- 914-4 2.0 - 88 hp (039-GC) from 1975 to 1976
- 914-6 2.0 - 110 hp (901.36/37/38/39) from 1970 to 1972

Suitable for manual and automatic gearboxes.

Rear part of gearbox control linkage
Shift rail in front of gearbox nose. Original VW quality.

For Transporter T25/T3 Syncro (4 x 4), 10/1984 ->07/1992:
Petrol engines, manual gearbox.

Central part of gearbox control linkage.
Gearshift rail.

For Transporter T25/T3, 08/1982 ->07/1992:
Petrol, Diesel engines & Turbo-Diesel
since chassis no. 24-D-000 001->
All models including Syncro version (4 x 4).

Shift lever ring for Bmw 7 Series:

Bmw E23 :

- 728i 6cyl 184hp from 09/1985 to 05/1986 (engine code m30b28)
- 728is 6cyl 184hp from 09/1985 to 04/1986 (engine code m30b28)
- 732i 6cyl 197hp from 09/1985 to 05/1986 (engine code m30b32)
- 735i 6cyl 218hp from 09/1985 to 06/1986 (engine code m30b34)

- Manual gearbox compatible only.

Please note! Not suitable for Bmw 7 Series E23 versions before 09/1985.

Gearshift linkage rear part, fork axle before gearbox nose for VW Transporter T25 / T3 Syncro (4x4) from 10/1984 to 07/1992 :
Diesel engines

Long rod on gearbox control.

Compatible with Seat Ibiza type 6K, only if gearbox control with linkage (not for cable controls):
- 1.6 75hp (1F, ABU, AEE, ALM)
- 1.6 100hp (AFT, AKL, AUR, APF)
- 1.8 90hp (ABS, ACC, ADZ)
- 1.8 16s 129hp (ADL)
- 1.9 Diesel 64hp (1Y, AEY)
- 1.9 SDi 68hp (AGP, AQM)
- 1.9 Turbo Diesel 75hp (AAZ)
- 2.0 115hp (2E, AGG)

Short rod on gearbox control.

Compatible with Seat Ibiza type 6K from 1994->, from chassis 6K-ZR632593-> or 6K-ZR106941->.
Only if gearbox control with linkage (not for cable controlled gearboxes):
- 1.6 75hp (1F, ABU, AEE, ALM)
- 1.6 100hp (AFT, AKL, APF, AUR)
- 1.8 90hp (ABS, ACC, ADZ)
- 1.8 16s 129hp (ADL)
- 1.9 Diesel 64hp (1Y, AEY)
- 1.9 SDi 68hp (AGP, AQM)
- 1.9 Turbo Diesel 75hp (AAZ)
- 2.0 115hp (2E, AGG)

Short rod on gearbox control.

Compatible with Seat Ibiza type 6K until ->1994, up to chassis ->6K-ZR632592 or ->6K-ZR106940.
Only if the gearbox is controlled by linkage (not for cable controlled gearboxes) AND the gearbox has 5 speeds:
- 1.6 75hp (1F, ABU)
- 1.6 100hp (AFT)
- 1.8 90hp (ABS, ACC, ADZ)
- 1.8 16s 129hp (ADL)
- 1.9 Diesel 64hp (1Y, AEY)
- 1.9 Turbo Diesel 75hp (AAZ)
- 2.0 115hp (2E, AGG)

Gearbox cablecontrol retrofit kit for Golf 3
For Golf 3 and Vento with cable shift only:- 1.9 TDi 90hp (1Z, AHU, ALE)- 1.9 TDi 110hp (AFN)- 2.0 16S 150hp (ABF)- 2.8 and 2.9 VR6 174/190hp (AAA, ABV)
This high-quality repair kit contains the bushes, levers and ball joints needed to correct any play in the gearshift lever that may make it impossible to shift gears.

This high quality gear linkage coupler repair kit for Volkswagen Beetle and Combi.
The main cause of play in the gear selector lever, this kit allows you to keep the original sheet metal housing and replace only worn parts with high-quality components.
Kit includes :- 2 nylon/rubber silent blocks- spacer, screw, flat washer and shouldered washer- clamping needle screw (bi-chromated)
Compatible models :- VW Beetle and derivatives, since 12/1963, from Chassis No. 5 911 561 + Mexico,- Karmann-Ghia type 14 and 34 since 12/1963, 181, Type 3 and 4.- Bay Window Combi, 08/1967 ->07/1979

Bearing with ball joint for Volkswagen Golf 1 and Scirocco gearshift lever
For Golf 1 all models and Scirocco,1.5, 1.6 and 1.8 engines with 4- or 5-speed manual gearbox.
Attached to the floor, this bearing articulates the gearshift.
Genuine Volkswagen part