Engine compartment

Vertical engine housing panel located behind the cooling turbine.
Model forT2 Bay Camper, without opening for oil radiator cooling spout.

For single intake engine.

For VW:
- T2 Bay Camper, 08/1967 ->07/1971
up to chassis no. 211 3200 000.

Vertical engine housing panel located behind the cooling turbine.
Model for T2 Bay Camper, with opening for oil radiator cooling spout.(for mounting with dog house turbine).

Ideal for dual intake 1600 engine.

For VW:
- T2 Bay Camper, 08/1967 ->07/1971
up to chassis no.211 3200 000.

Chrome without heating hole

Chrome with 2 heating holes

Chrome-plated engine crescent sheet without heater for Brazilian VW Combi Split from 1957 to 1975.

Set of screws and washers for fixing Type 1 engine cooling plates for VW Combi Bay Window from 08/1967 to 07/1979:- Engines 1200 to 1600.Not suitable for 1600 CT engine.

Pare pluie situé au niveau de la baie de pare brise,

Pour Polo 86C de 82 à 90 :
- Tous modèles (sauf MN)

Pour Polo 86C de 91 à 94 :
- Tous modèles Essence uniquement

Right rear battery support plate for VW Combi Split Pick-up single and double cab from 08/1952 to 07/1967.

Chrome-plated engine crescent plate without heater for VW Combi Split up to 07/1967.

Weld-on engine bay side panel, left-hand side.
Also includes the retaining strip for attaching the engine bay seal.

For VW Combi Split Brazil (1957-1975)

DANSK lower left engine cover for Porsche 911 type F and G from 1972 to 1976 :

- Porsche 911 type F :

- 911 2.4 T / E / S from 1972 to 1973
- 911 2.7 Carrera RS from 1973

- Porsche 911 type G :

- 911 Carrera 2.7 from 1974 to 1976

DANSK upper right-hand turbine plate for Porsche 911 type F and G from 1970 to 1989:

- Porsche 911 type F :

- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973
- 911 2.7 Carrera RS from 1973

- Porsche 911 type G :

- 911 2.7 from 1974
- 911 S 2.7 from 1974
- 911 Carrera 2.7 from 1974 to 1976

- 911 Turbo 3.0 from 1975 to 1977
- 911 Turbo 3.3 from 1978 to 1989

Upper right front engine sheet metal DANSK for Porsche 911 type F and G from 1965 to 1983 :
- Porsche 911 type F :
- 911 2.0 from 1965 to 1967- 911 2.0 S from 1967- 911 2.0 T / L / S from 1968- 911 2.0 T / E / S from 1969- 911 2.2 T / E / S from 1970 to 1971- 911 2.4 T / E / S from 1972 to 1973- 911 2.7 Carrera RS from 1973
- Porsche 911 type G :
- 911 2.7 from 1974 to 1977- 911 S 2.7 from 1974 to 1977- 911 Carrera 2.7 from 1974 to 1976- 911 Carrera 3.0 from 1976 to 1977- 911 SC 3.0 from 1978 to 1983
- 911 Turbo 3.0 from 1975 to 1977

DANSK upper right turbine plate for Porsche 914-6 from 1970 to 1972 :
- 914-6 2.0 - 110 hp (901.36/37/38/39) from 1970 to 1972

This rear right front engine sheet metal for Volkswagen Beetle (08/1965-07/1989) is to be welded into the engine compartment.
Right rear vertical front section with wiring harness lead-in from starter motor.
Includes gutter for engine gasket, as well as fixing lugs for tarred insulation panel.

For VW Cox Sedan and Convertible (08/1965-07/1989)

Right-hand central air guide under the cylinders
on engines Type 1: 37, 40,44, 46, 50hp
Original Volkswagen Classic Parts.

For Beetle, Karmann-Ghia, Combi, 181
On Type 1es: 1300, 1500, 1600cc

To be completed with the 1/2 panel, reference : 043 119 350 B

Original Volkswagen Classic Parts.

Front right air guide plate on Type 4 1700, 1800, 2000cc engineOriginal Volkswagen Classic Parts.
For VW Cox, Combi and 411 / 412

- Passat 3 (35i) from 88 ->93

Located on the windscreen frame

Twin-intake cylinder head covers for VVW Combi Bay Window from 08/1967 to 07/1979 with Type 1 engine.