Seats parts

Seat fastener for VW Beetle up to 07/1965 and Combi Split up to 07/1966.Height: 15.3 mm

Guides the seat and protects thecentral slider; if your seat moves around or has difficulty sliding, it's because this part is broken or missing.
2nd generation rubber model for:
- Golf 1 Saloon and Cabriolet
- Vento

Set of 4 plastic guides for 2 front seats
on chassis with "T" rail profile
To change when your seats have play and slide badly.

For Beetle, 08/1970 ->07/1972
Chassis N° 111 2000 001 ->112 3200 000.
For 181, since 1971

This seat elastic for 2cv cars and derivatives is compatible with all models.

Installation tips:
- Prepare the burlap or reinforced seat cloths by spreading the fibres evenly with a pointed object or a simple nail, opposite the holes in the frame.
- Mount the elastics symmetrically, one on the right and one on the left, to make it easier for you to mount them on the frame. If you mount one side first, it will be very difficult to mount the other.

This asymmetrical front seat bottom kit for 2cv cars and derivatives - seat and backrest is faithful to the original.

These asymmetrical front seat bases are for one seat.

This set is contains 2 pieces of burlap bordered by metal rings for attaching the seat elastics.

Thebench seat clamp for a VW Combi is an important part of securing and fixing the rear bench seat in the vehicle. This type of bracket holds the rear seat in place, securing it firmly by welding to the vehicle frame to prevent unwanted movement when the vehicle is in motion.In the VW Combi, the rear bench seat can be fixed or removable, depending on the needs of the owner and the use of the vehicle. The fixing bracket is therefore essential for the safety and stability of the seat.
The bracket holds the bench seat in place, securing it firmly to the vehicle's structure. This is crucial for passenger safety and to prevent the bench seat from shifting, particularly during hard braking or accidents.A properly installed bracket prevents the bench seat from moving and generating annoying noises when the vehicle is moving, such as rattling or squeaking.
This locking plate, to be welded to the floor to secure the T-bolt securing the rear seat, is designed for VW Combi Bay Window from 08/1967 to 07/1979.
Requires 2 to 6 pieces depending on assembly.

This reinforced seat bottom for 2cv vans - seat is superior quality.
This reinforced PVC mesh seat base is much stronger than the original canvas. It is stiffer so it gives you a higher and much more durable sitting position.
This seat bottom is fitted with elastic seat straps in the same way as traditional seat bottoms.
It is compatible with front and rear seats and bench seats, and can even be used for symmetrical backrests for a firmer hold.

Fitting tips:
- Spread the fibres slightly with a pointed object or a simple nail to hook on the seat elastic hooks.
- Glue the surface of the seat bottom and the foam with a neoprene contact adhesive and wait until the adhesive is dry to the touch before pressing both surfaces together firmly.

This reinforced seat base for 2cv cars and derivatives - seat is superior quality.
This reinforced PVC mesh seat base is much stronger than the original canvas. It is stiffer so it gives you a higher and much more durable sitting position.
This seat bottom is fitted with elastic seat straps in the same way as traditional seat bottoms.
It is compatible with front and rear seats and bench seats, and can even be used for symmetrical backrests for a firmer hold.

Installation tips:
- Spread the fibres slightly with a pointed object or a simple nail to hook on the seat elastic hooks.
- Glue the surface of the seat bottom and the foam with a neoprene contact adhesive and wait until the adhesive is dry to the touch before pressing both surfaces together firmly.

Headrest bar black color for front or rear seat depending on version for VW Transporter T4 from 08/1990 to 07/2003.
Sold by the unit, need 2 per seat.

M10 x 50 seat fixing screws for VW Combi Split and Bay Window up to 07/1979.

LH cover with hole for the knob + RH cover without hole, for the front right seat of:
- Polo 1 04/75 ->09/81
- Golf 1 08/74 ->07/83
- Golf 1 Cabriolet 01/79 ->07/83
- Golf 1 Caddy 10/82 ->7/83
- Jetta 1 08/74 ->07/83
- Scirocco 1 08/74 ->07/83

Pivot screw for rear seat back attachment.
Head: 13 mm
Collar length: 7.5 mm
Thread length: 12.5 mm
Need 2 per vehicle, sold individually.

For VW Cox (08/1956-07/1965)

This base allows the driver's seat to swivel , ideal for saving space in the motorhome's living area when the vehicle is stationary. Approved for use between the original seat and its box. Use the original bolts securing the seat to its box.
Center distances: Length: 38.5 cm

LH side of seat (driver's or passenger's)
Version without hole
For:
- Polo 1 04/75 ->09/81
- Golf 1 08/74 ->07/83
- Golf 1 cabriolet 01/79 ->07/83
- Golf 1 Caddy 10/82 ->7/83
- Jetta 1 08/74 ->07/83
- Scirocco 1 08/74 ->07/83

This front bench seat bottom kit for DYANEs and Acadianes - seat and backrest is faithful to the original.

These front bench backrests are for a bench seat.

This set is contains 4 pieces of burlap bordered by metal rings for attaching the seat elastics.

This asymmetrical front seat bottom kit for DYANEs and Acadianes - seat and backrest is faithful to the original.

These asymmetrical front seat bases are for one seat.

This set is contains 2 pieces of burlap bordered by metal rings for attaching the seat elastics.

Seat adjustment handle for Mercedes Pagoda

For Mercedes SL W113 Pagoda all models
Left or right side

Black color
Sold individually

Suitable for:
- Golf 1 Cabriolet, 79 ->93
- Scirocco 1, 74 ->81

Seat adjustment lever button
Left or right-hand side
Colour: beige ivory.

For:
- Beetle, 1947 ->07/1975
- Karmann-Ghia, 1956 ->07/1975
- 181, 1969 ->12/1979

Convient pour VOLKSWAGEN Transporter T4 de 1991 à 2003