Plate support

Front bumper plate support for Mercedes C Class Type W202 Saloon and Type S202 Estate, from 07/97->

Mazda MX5 NB Front license plate holder

- ABS plastic
- Strong and easy to assemble
- Supplied with seals and fixingclips
Only for Mazda MX5 NB 1998-2000
(up to chassis -> 200,000)

Front licence plate holder

Specs for the front licence plate holder on Mazda MX-5

- Compatible only with standard manufacturer's bumpers.
- Original Mazda product
Suitable for MazdaMX5 NC 2005 to 2008

Licence plate fitting adaptor for MX-5 NA

If you fit the MX10618 licence plate holder upside down, this adaptor enables you to lower your licence plate and fit it under the front grille

Black matte plastic front licence plate holder for MX5 NA

- Made of matte black plastic
- Equipped with a protective gasket for the bodywork
- Comes with its own fitting kit for the front bumper

For 520x110mm plates

Set of 2 lighting brackets in black powder coated steel for MX5 NA plate

Lighting brackets in black matte powder-coated steel

Product properties

- In black matte powder coated steel
- The original MAZDA is no longer available!
Fits all Mazda MX5 NA models

Licence plate bracket attachment screw for MX5 NA

Screws (front licence plate bracket)

Product properties

- The front licence plate bracket requires two of these screws
- Original MAZDA part
Fits all Mazda MX5 NA models

License plate attachment for:
- 911 from 1965 to 1989
- 912

To be attached to the bumper

Rear license plate bracket for Volkswagen Corrado
For VW Corrado all models
Genuine Volkswagen part

License plate holder for Porsche 911 type 993 from 1994 to 1998 :
- 993 3.6 - 272hp (M64.05/06/07/08) Carrera from 1994 to 1995- 993 3.6 - 272hp (M64.05/07) Carrera 4 from 1995- 993 3.6 - 285hp (M64.21/22/23/24) Carrera and Carrera S from 1996 to 1998- 993 3.6 - 285hp (M64.21/23) Carrera 4 and Carrera 4S from 1996 to 1998- 993 3.8 - 300hp (M64.20) Carrera RS from 1995 to 1996- 993 3.6 - 408hp (M64.60) Turbo from 1995 to 1998- 993 3.6 - 450hp (M64.60S) Turbo S from 1997 to 1998- 993 3.6 - 430hp (M64.60R) GT2 from 1996 to 1998

License plate bracket for Porsche 924 from 1976 to 1988 :
- 924 2.0 - 125 hp (XJ/XK) from 1976 to 1985- 924 2.5 S - 150 hp (M44.07/M44.08) from 1986 to 1987- 924 2.5 S - 160 hp (M44.09/M44.10) from 1988- 924 2.0 Turbo - 170 hp (M31.01) from 1979 to 1980- 924 2.0 Turbo - 177 hp (M31.03) from 1981 to 1985- 924 2.0 Carrera GT - 210 hp (M31.50) from 1981

License plate bracket for Porsche 911 type 996 from 1998 to 2005 :
- 996 phase 1 3.4 Carrera from 1998 to 2001- 996 phase 1 3.4 Carrera 4 from 1998 to 2001
- 996 phase 2 3.6 Carrera from 2002 to 2005- 996 phase 2 3.6 Carrera 4 from 2002 to 2005- 996 phase 2 3.6 Carrera 4S from 2002 to 2005
- 996 3.6 Turbo from 2001 to 2005- 996 3.6 Turbo S from 2005
- 996 3.6 GT2 from 2001 to 2004- 996 3.6 GT2 from 2005
- 996 phase 1 3.6 GT3 from 2000 to 2001- 996 phase 2 3.6 GT3 from 2004 to 2005- 996 phase 2 3.6 GT3 RS from 2004

License plate bracket for Porsche Boxster type 986 from 1997 to 2004 :
- 986 2.5 Boxster - 204 hp (M96.20) from 1997 to 1999- 986 2.7 Boxster - 220 hp (M96.22) from 2000 to 2002- 986 3.2 Boxster S - 252 hp (M96.21) from 2000 to 2002
- 986 2.7 Boxster - 228 hp (M96.23) from 2003 to 2004- 986 3.2 Boxster S - 260 hp (M96.24) from 2003 to 2004- 986 3.2 Boxster S550 - 266 hp (M96.24) from 2003 to 2004

License plate bracket for Porsche 944 from 1982 to 1991 :
- 944 phase 1 - 2.5 - 163hp (M44.01 to 04) from 1982 to 1985
- 944 phase 2 - 2.5 - 163hp (M44.05 to 08) from 1985 to 1987- 944 phase 2 - 2.5 - 160hp (M44.09/M44.10) from 1988- 944 phase 2 - 2.5 S - 190hp (M44.40) from 1987 to 1988- 944 phase 2 - 2.7 - 165hp (M44.11/M44.12) from 1989- 944 phase 2 - 3.0 S2 - 211hp (M44.41) from 1989 to 1991
- 944 2.5 Turbo - 220hp (M44.50/M44.51) from 1986 to 1988- 944 2.5 Turbo S/Cup M578 - 250hp (M44.52) from 1988- 944 2.5 Turbo - 250hp (M44.52) from 1989 to 1991

Collarspair with rubber for the registration plate fixation on the bumper with round renfort pipe USA type.

Polished aluminum rearlicense plate bracket European version for BMW 02 series E10 Sedan, Touring, Cabriolet and Cabriolet Baur Targa:

- All models 1502 to 2002Turbo from 03/1966 to 07/1977.

INFORMATION: This support is adjustable in width by sliding the 2 parts that make it up, allowing it to be adapted to the license plate format of each European country (France, Belgium, Italy etc...).

This rear-mounted hubcap will add the final, original touch to your E10 during a bodywork restoration. Quality and finish guaranteed!

In view of the flexibility of the aluminum material used for this beautiful remanufacture, we recommend that you take the utmost care when fitting.

Fastening screws not supplied.

Central number-plateholder black on front bumper for BMW 5 Series E39 Sedan and Touring phase 1 up to 08/2000 :

- All petrol and diesel models with Shadow-Line finish option code S339A (except M5)

ATTENTION: Not suitable for trim with chrome inserts!

This plate support on the front bumper has a grainy texture.

This is an "adaptable" quality part not supplied by the manufacturer.

Central number-plateholder black on front bumper for BMW 5 Series E39 Sedan and Touring phase 1 up to 08/2000 :

- All petrol and diesel models with chrome insert trim (except M5 and Shadow Line)

This front bumper trim has a grainy texture. It is designed solely to accept the chrome trim strip (not supplied).

This is an "adaptable" quality part not supplied by the manufacturer.

Designed for bumpers without chrome-plated mouldings.