Nuts, pins, caps

This brake cam spacer for 2cvs before 1970 is faithful to the original.

This brake adjustment cam spacer must be positioned between the washer and the 200mm front drum shoe adjustment cam and the 180mm rear brake drums of the 2cv and its derivatives.

This spacer was originally mounted only on the rear brakes of the first 2cv models

This brake cam washer for DYANEs and Acadianes is faithful to the original.

The front brake cam washer is used to support the adjustment screw head on the front and rear brake shoe adjustment cam of DYANEs and Arcadianes.

Rear drum brake shoe springs for Volkswagen Golf 2 Country:

- 1.8L Syncro 98hp from 04/1990 to 10/1991 (engine code 1P) -> with 230x40mm drums

This set of brake shoe attachments is valid for both left and right sides.

Dust plug on drum flange for:
- 924 2.0 from 1976 to 1985

Tige de poussée pour le réglage des mâchoires de frein du tambour arrière côté droit. Origine Volkswagen Classic Parts.

Pour Transporter T25 / T3 Syncro (4 x 4) 08/1987 ->07/1992
version avec roues 16" pouces depuis châssis N° 24-J-000 001->

Left rear brake adjustment bar drum for VW Transporter T25 from 1979 to 1992.

Pushrod positioned between the brake linings on the left rear wheel.

For VOLKSWAGEN Combi Split Brazil (1957-1975)

This crimpable -th- brake cam axle for 2cv vans is faithful to the original.

This cam pin is a quality remanufacture.
Made of steel and is compatible with the adjustment of the front brake cams on the 2cv cars and derivatives with front drums of 200mm diameter and for all rear brakes.

Short jaw spring for:
- 911 from 1965 to 1989
- 912
- 930
- 924 Turbo from 1979 to 1984
- 924 S
- 944 from 1982 to 1989
- 944 Turbo from 1986 to 1991
- 944 S from 1987 to 1988
- 944 S2 from 1989 to 1991
- 964 Carrera 2/4 from 1989 to 1994
- 964 Carrera RS
- 964 Turbo 3.3 and 3.6
- 964 Carrera 2/4 from 1989 to 1994
- 993 Carrera RS
- 993 Turbo
- 928 from 1978 to 1982
- 928 S and S4 from 1980 to 1991
- 928 GT and GTS from 1989 to 1995

This brake cam washer for 2cv cars and derivatives is faithful to the original.

The front brake cam washer is used to support the adjustment screw head on the front and rear brake shoe adjustment cam of 2cv cars and derivatives.

This brake cam washer for AMI 6 and AMI 8 cars is faithful to the original.

The front brake cam washer is used to support the adjustment screw head on the front and rear brake shoe adjustment cam of AMI 6 and AMI 8 cars.

This brake cam spacer for 2cv vans is true to the original.

The front brake cam washer is used to support the adjustment screw head on the front and rear brake shoe adjustment cam of 2cv cars and derivatives.

Suitable for VOLKSWAGEN Transporter T25

Handbrake control lever on the left rear wheel backing plate.

For VOLKSWAGEN Combi Split Brazil (1957-1975)

This ultra-complete set of clips and springs holds the brake shoes in place and ensures their smooth operation.Rear brake shoes are an essential component of the drum brake system.This kit for the 2 rear wheels is suitable for VW Combi Bay Window from 08/1973 to 07/1979 from chassis no. 214 2000 001.

Springs & adjusting parts for brake shoes.
Full set for both wheels
Models equipped with rear drum brakes.

For VW Transporter T4 09/1990 ->12/1995
including Syncro version (4 x 4)
up to chassis No. ->70-T-199 999.

Pushrod positioned between the brake linings on the right rear wheel.

For VOLKSWAGEN Combi Split Brazil (1957-1975)

This brake cam washer for Meharis is faithful to the original.

The front brake cam washer is used to support the adjustment screw head on the front and rear brake shoe adjustment cam of Meharis.

These front brake shoe centring pins for 2cv cars and derivatives - 4 pieces are an alternative to the original ones.

This set of 4 RC -round- guides for the front brakes of 2cv and derivatives means you no longer have to worry about the lower adjustment of the brake shoes.
They replace the traditional eccentric spacers.

This brake cam spacer for Meharis is true to the original.

This brake adjustment cam spacer must be positioned between the washer and the 200mm front drum shoe adjustment cam and the 180mm rear brake drums of the 2cv and its derivatives.

This spacer was originally mounted only on the rear brakes of the first 2cv models