Wheel cylinder

This TRW BWF 127 left rear wheel cylinder for Renault - 20.6mm is an original type.

Wheel cylinder with integrated regulator, it was fitted to a large number of late 20th century vehicles produced by Renault.

Compatible models :
RENAULT SUPER 5
- 1.0 (B/C/400) (1984/10-1988/10)
- 1.1 (B/C/401, B/C40H) (1986/01-1995/03)
- 1.1 (B/C/401) (1984/10-1988/10)
- 1.4 (B/C402) (1984/10-1988/06)
- 1.4 (B/C403) (1984/10-1989/07)
- 1.4 (B/C40M) (1987/06-1990/08)
- 1.4 (B/C40J) (1987/06-1989/07)
- 1.7 i (C409) (1986/10-1991/08)
- 1.7 (B/C40K, B/C40G) (1987/06-1995/03)
- 1.6 D (B/C/404) (1985/08-1996/12)-7
- 1.7 (B/C408) (1986/10-1995/03)
- 1.4 Cat (B/C/407) (1985/10-1996/12)
- 1.2 (B/C40F) (1987/01-1990/08)
- 1.6 D (1985/04-1990/12)
- 1.1 (1989/10-1990/12)
- 1.4 (1986/08-1996/12)

RENAULT EXPRESS
-1.4 (F40M) (1986/03-1991/08)
- 1.6 D (F404) (1986/03-1998/08)
- 1.9 D (F40P, F40N, F40E) (1991/09-1998/03)
- 1.4 Cat (F407) (1988/08-1998/03)
- 1.4 (F40U, F40V) (1991/09-1998/03)
- 1.9 D (F40R) (1994/09-1998/03)
- 1.4 (F40D) (1994/01-1998/03)
- 1.4 (F402) (1985/07-1991/08)
- 1.0 (S400) (1984/10-1988/10)
- 1.1 (S401) (1984/10-1996/12)
- 1.2 (S40F, S407) (1987/01-1996/12)
- 1.6 D (S404) (1984/10-1996/12)
- 1.4 (1985/09-1986/07)

RENAULT CLIO I
- 1.9 D (B/C/S576, B/C/S57L) (1991/01-1998/09)
- 1.2 (B/C/S57A, B/C57S, 5/357F, 5/357J, 5/357L, 5/357R) (1990/05-1998/09)
- 1.4 (B/C57T, B/C57Y) (1991/01-1998/09)
- 1.8 16V (C57D) (1991/01-1996/03)
- 1.8 (B/C57C, B/C57U) (1991/01-1998/09)
- 1.8 (B/C57C, C579, B/C57U) (1994/08-1996/04)
- 1.8 Rsi (B/C57H) (1995/08-1998/09)
- 1.8 Rsi (B/C579) (1993/01-1995/08)
- 1.2 (5/357Y, 5/357K) (1996/01-1998/09)
- 1.1 (1992/04-1992/08)1.9 D (1996/05-1998/02)
- 1.7 (B/C574) (1991/01-1993/12)1.8 (1990/08-1996/04)
- 1.2 (B/C57R, B575, B57A) (1991/01-1996/06)
- 1.4 (1991/01-1998/09)1.2 (B/C/S577) (1996/01-1996/12)
- 1.4 (B57J, C57J, B57P) (1991/01-1998/09)
- 1.2 (B/C/S572) (1990/05-1996/03)

This Front Wheel Cylinder STOP for AMI6 and AMI8 with key of 9 (12/1963-07/1969)- 28.6mm is original quality.

This Front Wheel Cylinder for AMI6 and AMI8 Sedan or Station Wagon is an original fitment.
It is compatible with models with 220mm drum front brakes and 4.5mm hose and 9 key.

- AMI6 Sedan AM/AM2 : 12/1963-03/1969
- AMI6 Estate AMB/AMB2 : 04/1965- 09/1969
- AMI8 Sedan AM3 : 03/1969-07/1969

Warning!! your vehicle may have been modified, check the diameter of the wheel cylinder and the wrench needed to tighten the brake hose ends.
Use only DOT4 or DOT5 brake fluid.
LHM fluid is very corrosive to parts not intended for its use, the wrong brake fluid could severely damage your brake system.

ATE brake cylinder for front wheel
Piston diameter (inside the cylinder!): 19.05 mm

For Beetle, up to ->09/1957
up to chassis N° ->1 673 410.

Left front brake cylinder BENDIX type for Renault 5 - 23,8 mm

For Renault 5 :
- Renault 5 L (R1220) from 01/1972 to 12/1976 - Billancourt 782cm3 36hp (839-01)
- Renault 5 L (R1221/R1391) from 01/1977 to 12/1983 - Billancourt 845cm3 38hp (800-710) up to chassis N°0051150

Front left wheel cylinder (driver)

This BENDIX Rear Wheel Cylinder Repair Kit for Renault 4 (10/1982-12/1993) - 22mm is made in Europe.

This Wheel Cylinder Repair Kit for R4 is compatible with 22mm diameter wheel cylinders on Bendix system disc brake models.

It includes, bellows, cups and bleed plug.

Compatible models:

- R4 GTL type R1128 : 10/1982 to 12/1993
- R4 Savane type R112C : 09/1986 to 12/1992

- R4 Extended Van F6 type R2370 : 10/1982 to 11/1985
- R4 F6 Pick up type 3C2370: 10/1982 to 11/1985
- R4 Glass long van R2430: 05/1975 to 07/1978
- R4 F4 type R210B: 09/1981 to 05/1990
- R4 F4 station wagon type 239B: 09/1981 to 05/1990

This LPR right rear wheel cylinder for Peugeot 504 (09/1968-12/1989) - 28.57mm is an excellent quality reproduction.
This right rear wheel cylinder for Peugeot 504 is compatible with most models according to the technical specifications detailed below.
It also equipped the rear drums of 404, 309 and UMM Alter and Transcat and the front drums of Panhard PL17.

For Audi 80 up to chassis ->8C-P-090829

For Audi 100 ->07/93

Right front wheel cylinder for Renault Floride

For Renault Floride:
- Renault Floride (R1092) from 05/1959 to 02/1962 - Ventoux 845cm3 38hp (670-05)

This original-quality drum brake cylinder for the right front wheel is mounted with the bleed facing up and the pipe facing forward.
Diameter 22mm

This LPR left rear wheel cylinder for Peugeot 404 (08/1966-10/1969) - Hydrovac is an excellent quality reproduction.
This left-hand rear wheel cylinder for Peugeot 404 with assisted braking is compatible with sedans that benefited from the Hydrovac-assisted Bendix braking system introduced on the 1966 model year. Please refer to the detailed technical specifications below.

Right front wheel cylinder for Renault Dauphine

For Renault Dauphine:
- Renault Dauphine (R1090) from 03/1956 to 06/1962 - Billancourt 845cm3 26hp
- Renault Dauphine (R1090) from 07/1962 to 06/1963 - Billancourt 845cm3 32hp
- Renault Dauphine Gordini (R1091) from 07/1957 to 12/1960 - Ventoux 845cm3 33hp
- Renault Dauphine Gordini (R1091) from 09/1962 to 09/1963 - Ventoux 845cm3 33hp

This original-quality drum brake cylinder for right front wheel is mounted with the bleed facing up and the pipe facing forward.
Diameter 22mm

Brake cylinder on front left-hand wheel, sold per unit.
Warning: there are 2 cylinders for each front wheel!
Comes without bleeder screw.
Diameter: 25.40 mm
Position : top or bottom left

For:
- VW Combi Split, 08/1963 ->07/1967
since chassis no. 1 144 282->
- VW Combi Bay Window, 08/1967 ->07/1970
up to chassis no. ->210 2300 000.

This rear wheel cylinder for Citroën DS sedan - 18mm is faithful to the original.
This rear brake cylinder is compatible for DS sedan models.
Compatible models:DS 19 Sedans and Cabriolets (1911cc) - (1956-03/1965)ID 19 Sedans and Cabriolets (1911cc) - (1958-1966)DS 19/20 Sedans (1985cc) - (1966-1975)DSuper/DSpécial (1985cc) - (1972-1975)ID 19/20 Sedans (1985cc) - (1967-1971)DS 21 Sedans and Cabriolets (2175cc) - (1966-1969)DS 23 Sedans (2347cc) - (1973-1975)

LPR22.2mm front wheel cylinder for Fiat 500 N, D, F, L and R (1957-1975)
Can be mounted on right or left side
Brake system: Bosch/Bendix
Hole spacing: 35mm
Sold individually
For models listed below:- Fiat 500 N from 1957 to 1960- Fiat 500 D from 1960 to 1965- Fiat 500 F from 1965 to 1968- Fiat 500 L from 1968 to 1972- Fiat 500 R from 1972 to 1975

Left or right rear wheel cylinder.
Aluminium model with 1 securing screw.

Compatible with Seat Ibiza type 6Kfrom 03/1999->:
- 1.4 100hp (AQQ, AUB)
- 1.6 100hp (AKL, APF, AUR)

This SASIC left rear wheel cylinder for Peugeot 504 (09/1968-12/1989) - 28.57mm is true to original.
This left-hand rear wheel cylinder for Peugeot 504 is compatible with most models according to the technical specifications detailed below.
It also equipped the rear drums of the 404, 309 and UMM Alter and Transcat and the front drums of the Panhard PL17.

Front left-hand slave cylinder for:
- 356 A and B 1.3 to 1.6 from 01/1954 to 12/1963

Mount on the top left-hand side, on the bottom right-hand side.

Brand: ATE

This front wheel cylinder for 2CV A-AZ (07/1949-03/1963) - 25.4 mm is a quality reproduction.

This front wheel cylinder for 2CV sedans is true to original.
This front wheel cylinder is compatible with 2CV sedans and derivatives up to March 1963 with Banjo system.

It's connection to the brake hoses is done by a 10x1mm key .

Compatible models:

- 2CV A type A: 07/1949 to 03/1961
- 2CV AZ type AZ: 10/1954 to 03/1963
- 2CV AZL type AZ: 12/1956 to 03/1963
- 2CV AZLP type AZ: 09/1957 to 03/1963
- 2CV 4x4 "SAHARA" type AZ4/4: 09/1959 to 09/1966

- 2CV AU type AU: 03/1951 to 07/1956
- 2CV AZU type AZU: 10/1954 to 03/1963

Warning!! your vehicle may have been modified, check the diameter of the wheel cylinder and the wrench needed to tighten the brake hose ends.
Only use DOT4 or DOT5 brake fluid.
LHM fluid is very corrosive to parts not intended for its use, the wrong brake fluid could severely damage your braking system.

Wheel cylinders are responsible for transmitting hydraulic pressure from the master cylinder to the brake shoes, enabling effective braking. If you need to replace a right-front wheel cylinder, you have two brands that are good choices in terms of quality: ATE and FTE, two manufacturers renowned in the automotive industry for their braking components.
This ATE / FTE original-quality right-front-wheel brake receiver is supplied without bleed screw and is suitable for VW :- Combi Split from 08/1963 to 07/1967 from chassis no. 1 144 282- Combi T2 Bay Window from 08/1967 to 07/1970 up to chassis no. 210 2300 000.Diameter: 25.40 mmPosition: straight up or down.

This rear wheel cylinder -STIB- with 8mm spanner fitting for 2cvs - DOT4 is high quality.

This rear wheel cylinder for 2cv saloons is faithful to the original.
Made in Europe, this STIB rear wheel cylinder is compatible with 2cv saloons and derivatives from June 1970 with front drum brakes.

Use an 8 mm spanner to connect it to the brake pipe.

Compatible models:
- 2cv4 AZL4 after 06/1970
- 2cv6 AZL6 from 06/1970 to 07/1981
- 2cv AZU AK250 after 01/1972
- Dyane 4 AYA2 after 06/1970
- Dyane 6 AYB after 06/1970
- Mehari from 01/1972 to 07/1977

Watch out!!! Your vehicle may have been modified, so check the diameter of the wheel cylinder and the spanner you need to tighten the brake hose ends.
Use only DOT4 or DOT5 brake fluid.
LHM fluid is very corrosive to parts not intended for its use, and the wrong brake fluid could seriously damage your braking system.