Wheel cylinder

LPR19.05mm rear wheel cylinder for Fiat 500 N, D, F, L and R (1957-1975)
Can be mounted on right or left side
Brake system: Bendix
Hole spacing: 35mm
Sold individually
For models listed below:- Fiat 500 N from 1957 to 1960- Fiat 500 D from 1960 to 1965- Fiat 500 F from 1965 to 1968- Fiat 500 L from 1968 to 1972- Fiat 500 R from 1972 to 1975

Wheel cylinder for a drum rear axle,

For E10 from 01/74 to 06/75:
- 2002 Turbo

Wheel cylinder for a drum rear axle,

For E12:
- 518 M10
- 520 M10
- 520 M20
- 520 i M10
- 520 i M20

LPR25.4mm rear wheel cylinder for Fiat 500 Topolino B and C (1948-1955)
Can be mounted on right or left side
Brake system: Bendix
Hole spacing: 35.5mm
Sold individually

This rear wheel cylinder for 2CV AU-AZU (03/1951-03/1963) - 19mm is a quality reproduction.

This rear wheel cylinder for 2CV van is true to the original.
This rear wheel cylinder is compatible with 2CV Vans up to March 1963 with Banjo system.

It's connection to the brake hoses is done by a 10x1mm key .

Compatible models:

- 2CV A type A: 07/1949 to 03/1961
- 2CV AZ type AZ: 10/1954 to 03/1963
- 2CV AZL type AZ: 12/1956 to 03/1963
- 2CV AZLP type AZ: 09/1957 to 03/1963
- 2CV 4x4 "SAHARA" type AZ4/4: 09/1959 to 09/1966

- 2CV AU type AU: 03/1951 to 07/1956
- 2CV AZU type AZU: 10/1954 to 03/1963

Warning!! your vehicle may have been modified, check the diameter of the wheel cylinder and the wrench needed to tighten the brake hose ends.
Only use DOT4 or DOT5 brake fluid.
LHM fluid is very corrosive to parts not intended for its use, the wrong brake fluid could severely damage your braking system.

This LHM - 16 mm - M8x1.25mm - rear wheel cylinder with 8mm spanner fitting for 2cv cars and derivatives is a quality remanufacture.

This LHM rear wheel cylinder for 2cv saloons is faithful to the original.
It is compatible with the 2cv saloons and derivatives from July 1981 onwards with front disc brakes.

Use an 8 mm spanner to connect it to the brake pipe.

Compatible models:
- 2cv6 AZL6 after 07/1981
- AMI 8 saloon AM3 after 07/1969
- Dyane 6 AYB after 06/1970
- Mehari after 07/1978

Watch out!!! Your vehicle may have been modified, (green for LHM, red for DOT) so check the diameter of the wheel cylinder and the spanner you need to tighten the brake hose ends.
Use only LHM brake fluid.
LHM fluid is very corrosive to parts not intended for its use, and the wrong brake fluid could seriously damage your braking system.

This LHM - 16 mm - M8x1.25mm - rear wheel cylinder with 8mm spanner fitting for DYANEs and Acadianes is a quality remanufacture.

This LHM rear wheel cylinder for 2cv saloons is faithful to the original.
It is compatible with the 2cv saloons and derivatives from July 1981 onwards with front disc brakes.

Use an 8 mm spanner to connect it to the brake pipe.

Compatible models:
- 2cv6 AZL6 after 07/1981
- AMI 8 saloon AM3 after 07/1969
- Dyane 6 AYB after 06/1970
- Mehari after 07/1978

Watch out!!! Your vehicle may have been modified, (green for LHM, red for DOT) so check the diameter of the wheel cylinder and the spanner you need to tighten the brake hose ends.
Use only LHM brake fluid.
LHM fluid is very corrosive to parts not designed for its use, and the wrong brake fluid could seriously damage your braking system.

This DOT4 - 19mm - M8x1.25mm rear wheel cylinder with 8mm spanner fitting for AK350-400 vans is a quality reproduction.

This rear wheel cylinder for 2cv AK vans is faithful to the original.
It is compatible with AK350 and AK400 2cv vans from July 1969 onwards with front drum brakes of 220 mm.

Use an 8 mm spanner to connect it to the brake pipe.

Watch out!!! Your vehicle may have been modified, so check the diameter of the wheel cylinder and the spanner you need to tighten the brake hose ends.
Use only DOT4 or DOT5 brake fluid.
LHM fluid is very corrosive to parts not designed for its use, and the wrong brake fluid could seriously damage your braking system.

This LHM - 16 mm - M8x1.25mm - rear wheel cylinder with 8mm spanner fitting for Meharis is a quality remanufacture.

This LHM rear wheel cylinder for Meharis is faithful to the original.
It is compatible with Meharis from July 1977 onwards with front disc brakes.

Use an 8 mm spanner to connect it to the brake pipe.

Compatible models:
- 2cv6 AZL6 after 07/1981
- AMI 8 saloon AM3 after 07/1969
- Dyane 6 AYB after 06/1970
- Mehari after 07/1978

Watch out!!! Your vehicle may have been modified, (green for LHM, red for DOT) so check the diameter of the wheel cylinder and the spanner you need to tighten the brake hose ends.
Use only LHM brake fluid.
LHM fluid is very corrosive to parts not designed for its use, and the wrong brake fluid could seriously damage your braking system.

Rear wheel cylinder with key 9 for AMI after 1964 - 17,5mm - 9.125mm

ATE rear wheel cylinder for Bmw E9: Bmw E9 : - 2800 cs 6cyl 170hp from 12/1968 to 03/1971 (engine code m30)
Warning! Not compatible with other versions.

Rear wheel brake slave cylinder
Diameter: 19.05 mm
Position : left or right-hand
Original German quality ATE/FTE

For VW Combi Split, 1950 ->03/1955
up to chassis No. ->117 901.

ATE brake cylinder for rear wheel
Piston diameter (inside the cylinder!): 17.46 mm

For VW Cox 1300, 1500, 1302, 1303, (08/1967-)
For VW Cox 1200, (12/1967-)
For VW Karmann-Ghia type 14, (08/1967-)
For VW Kübel 181 cardan models, (03/1973-)

ATE brake cylinder for rear wheel
Piston diameter ( inside the cylinder ! ) : 19,05 mm

- For VW Beetle

ATE brake cylinder for rear wheel
Piston diameter ( inside the cylinder ! ) : 19,05 mm

For Beetle Split, 12/1947 ->02/1950
until chassis N° ->167 889.

This LPR short right rear wheel cylinder for Peugeot 504 (09/1968-12/1989) - 22mm - M10 is an excellent quality reproduction.
The body of this right rear wheel cylinder for Peugeot 504 is shorter than PE30328 , it is compatible with a large number of Bendix system models. Please refer to the detailed technical specifications below.
It has also been fitted to Peugeot 505s.

This LPR short right rear wheel cylinder for Peugeot 504 with TRW system - 22mm - M10 is an excellent quality reproduction.
The body of this right rear wheel cylinder for Peugeot 504 is compatible with a large number of French production models from the 80's with TRW - GIRLING system. Please refer to the technical specifications below.
It has also been fitted to the Peugeot 505 and 309.

This LPR short right rear wheel cylinder for RENAULT with TRW system - 22mm - M10 is an excellent quality reproduction.
The body of this right rear wheel cylinder for RENAULT is compatible with a large number of TRW/GIRLING production models from the 80s. Please refer to the technical specifications detailed below.
Compatible models:RENAULT SUPER 5: all TRW-mounted models from 01/1984 to 12/1996
RENAUT 9 with TRW/GIRLING mounting:- Renault 9 TL 09/1981 to 06/1985 Cléon-Fonte 1397cm3 60hp (C1J-)- Renault 9 TL 07/1985 to 06/1988 Cléon-Fonte 1397cm3 68hp (C2J-)- Renault 9 GTL 09/1981 to 06/1985 Cléon-Fonte 1397cm3 60hp (C1J-)- Renault 9 GTL 07/1985 to 06/1988 Cléon-Fonte 1397cm3 68hp (C2J-)- Renault 9 GTX 02/1984 to 06/1988 Cléon-Fonte 1721cm3 82hp (F2N-)- Renault 9 TXE 02/1984 to 06/1988 Cléon-Fonte 1721cm3 82hp (F2N-)- Renault 9 Turbo 03/1984 to 08/1986 Cléon-Fonte 1397 cm3 105hp (C1J)- Renault 9 Turbo 09/1986 to 06/1988 Cléon-Fonte 1397 cm3 115hp (C1J)- Renault 9 TD 12/1982 to 06/1988 1596cm3 55hp (F8M-)- Renault 9 GTD 12/1982 to 06/1988 1596cm3 55hp (F8M-)
RENAUT 11 with TRW/GIRLING assembly:- Renault 11 C 04/1983 to 06/1985 Cléon-Fonte 1108cm3 48hp (C1E-)- Renault 11 C 07/1986 to 06/1988 Cléon-Fonte 1237cm3 55hp (C1G-)- Renault 11 TC 04/1983 to 06/1985 Cléon-Fonte 1108cm3 48hp (C1E-)- Renault 11 TC 07/1986 to 06/1988 Cléon-Fonte 1237cm3 55hp (C1G-)- Renault 11 GTC 04/1983 to 06/1985 Cléon-Fonte 1108cm3 48hp (C1E-)- Renault 11 TL 04/1983 to 06/1985 Cléon-Fonte 1397cm3 60hp (C1J-)- Renault 11 TL 07/1985 to 06/1988 Cléon-Fonte 1397cm3 68hp (C2J-)- Renault 11 GTL 04/1983 to 06/1985 Cléon-Fonte 1397cm3 60hp (C1J-)- Renault 11 GTL 07/1985 to 06/1988 Cléon-Fonte 1397cm3 68hp (C2J-)- Renault 11 GTS 04/1983 to 06/1985 Cléon-Fonte 1397cm3 72hp (C2J-)- Renault 11 GTX 02/1984 to 06/1988 Cléon-Fonte 1721cm3 82hp (F2N-)- Renault 11 TXE 02/1984 to 06/1988 Cléon-Fonte 1721cm3 82hp (F2N-)- Renault 11 TLE 04/1983 to 06/1985 Cléon-Fonte 1397cm3 60hp (C1J-)- Renault 11 TSE 04/1983 to 06/1985 Cléon-Fonte 1397cm3 72hp (C2J-)- Renault 11 Turbo 03/1984 to 08/1986 Cléon-Fonte 1397 cm3 105hp (C1J)- Renault 11 Turbo 09/1986 to 06/1988 Cléon-Fonte 1397 cm3 115hp (C1J)- Renault 11 TD 04/1983 to 06/1988 1596cm3 55hp (F8M-)- Renault 11 GTD 03/1984 to 06/1988 1596cm3 55hp (F8M-)
RENAULT R14 : all TRW models from 10/1976 to 06/1983
RENAULT R18 TRW/GIRLING::- Renault 18 R1340 04/1979 to 06/1984 Cléon-Fonte 1397cm3 64hp (C1J)- Renault 18 TL R1340 04/1978 to 06/1989 Cléon-Fonte 1397cm3 64hp (C1J)- Renault 18 GTL R1340 04/1978 to 06/1981 Cléon-Fonte 1397cm3 64hp (C1J)- Renault 18 TD/GTD R1344 07/1980 to 06/1984 Douvrin 2068cm3 67hp (J8-852)
RENAULT FUEGO with TRW/GIRLING assembly : - Renault Fuego TL 03/1980 to 06/1985 Cléon-Fonte 1397cm3 64hp (C1J)- Renault Fuego GTL 03/1980 to 06/1983 Cléon-Fonte 1397cm3 64hp (C1J)- Renault Fuego GTL 07/1983 to 06/1985 Cléon-Alu 1647cm3 74hp (A2M-843)
EXPRESS 1.1L Cléon with TRW/GIRLING mounting

This LPR right rear wheel cylinder for Peugeot 404 (08/1966-10/1969) - Hydrovac is an excellent quality reproduction.
This right-hand rear wheel cylinder for Peugeot 404 with assisted braking is compatible with sedans that benefited from the Hydrovac-assisted Bendix braking system introduced on the 1966 model year. Please refer to the detailed technical specifications below.

This LPR right rear wheel cylinder for Peugeot 404 (12/1968-04/1973) - 23.81 mm is an excellent quality reproduction.
This right rear wheel cylinder for Peugeot 404 sedans with power-assisted braking. Using a larger diameter piston (23.81mm), it replaced the first generation of rear wheel cylinders for Peugeot 404 sedans with Hydrovac assisted Bendix braking from the 1969 vintage. See the detailed technical specifications below.