Front & rear panel

This front panel for Peugeot 504 petrol is a reproduction.
Stamped in Europe, it is compatible with all Peugeot 504 models, sedans, station wagons, station wagons and pick-ups with petrol engines up to chassis number 3512502.
Later models will require adaptations to the crossmember and side gussets,
Not suitable for Peugeot 504 coupés and cabriolets!

Replacement plate for top of front panel bulkhead below windscreen, to be welded.

For VW Transporter T25/T3, Bus, Van,
Caravelle, Carat, Joker, Syncro (4 x 4)
Years: 05/1979 -> 07/1992
Right-hand drive (RHD) model.

Outer plate to repair the tailgate sill.

For VW Transporter T4, 09/1990 ->06/2003
All models with tailgate.

Inner plate to repair the tailgate sill.

For VW Transporter T4, 09/1990 ->06/2003
All models with tailgate.

Outer plate to repair the rear left-hand door.

For VW Transporter T4, 09/1990 ->06/2003
All models with swing doors.

Outer plate to repair the right-hand door.

For VW Transporter T4, 09/1990 ->06/2003
All models with swing doors.

Replacement plate for windscreen aperture, to be welded.
Does not have water drainage grooves.

For VW Transporter T4, Multivan
Years: 02/1994 -> 06/2003
Chassis: from no. 70-R-080 424 ->

Trim for lower part of short front panel, for version in 1 part with radiator grille and square indicators phase 2 (AC0). Model without headlamp washer hole.

For Transporter T4, 09/1994 ->04/2003
since chassis no. 70-S-010 966->

Trim for lower partof long front panel, version with radiator grille and round indicators (AC1). Modelwithout headlamp washer hole.

For Transporter T4, Multivan,Caravelle, 01/1996 ->04/2003
chassis no. 70-T-200 000 ->70-3-200 000.

Black ABS plastic front frame for MINI II R50 Saloon and R52 Convertible:

R50 Saloon :
- Cooper 1.6L 116hp from 09/2000 to 11/2006 (engine code W10B16)
- One 1.6L 90hp from 09/2000 to 11/2006 (engine code W10B16)

R52 Cabriolet :
- Cooper 1.6L 116hp from 11/2002 to 07/2008 (engine code W10B16)
- One 1.6L 90hp from 01/2003 to 07/2008 (engine code W10B16)

ATTENTION: Not suitable for Mini R50 Sedan One D 1.4L diesel or Mini R53 Sedan!

The front panel is supplied unprimed. Before final painting, it is essential to carry out a blank assembly to check alignment and adjustment on the body.

This front panel is "adaptable" because it is not supplied by the manufacturer.

Black ABS plastic front frame for MINI II R52 Convertible and R53 Saloon:

R52 Cabriolet :
- Cooper S manu. 1.6L 163hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S 1.6L 170hp from 07/2004 to 07/2008 (engine code W11B16)
- Cooper S JCW 1.6L 200hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S JCW 1.6L 210hp from 07/2004 to 07/2008 (engine code W11B16)

R53 Sedan :
- Cooper S manu. 1.6L 163hp from 10/2000 to 06/2004 (engine code W11B16)
- Cooper S 1.6L 170hp from 07/2004 to 11/2006 (engine code W11B16)
- Cooper S JCW 1.6L 200hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S JCW 1.6L 210hp from 07/2004 to 11/2006 (engine code W11B16)
- Cooper S JCW GP 1.6L 218hp from 03/2006 to 09/2006 (engine code W11B16)

ATTENTION: Not suitable for Mini R50 Sedan!

The front panel is supplied unprimed. Before final painting, it is essential to carry out a blank assembly to check alignment and adjustment on the body.

This front panel is "adaptable" because it is not supplied by the manufacturer.

Front panel for Fiat 500 F series 1 (1965-1968)
For 1st series F models with "oval" Fiat logo and chrome strips on each side.
Made in Italy
Part covered with a black protective paint often scratched during transport/storage, you must remove it before priming and painting.Made from old molds, adjustments may be necessary to fit your vehicle perfectly.
Whatever the body components, origin and quality, a "blank assembly" is essential to check and correct any adjustments before painting.

Front panel for Fiat 500 R (1972-1975)


For R models with the "rectangular" Fiat logo positioned horizontally.

Made in Italy

Part covered with black protective paint, often scratched during transport/storage, must be removed before priming and painting.
Made from old molds, adjustments may be necessary to fit your vehicle perfectly.

Whatever the body components, origin and quality, a "blank assembly" is essential to check and correct any adjustments before painting.

Right front panel bracket for Bmw 1 Series:
- Compatible with all Bmw 1 Series F20 and F21 versions from 07/2010 to 06/2019 including sport model type m135i and m140i.

The Combi's weld-on front panel is a part of the bodywork that often requires repair or replacement when damaged, rusted or worn. This part refers to the front section of the body, around the bumper, headlights and grilles, which can be replaced or repaired by welding.When properly repaired, the front end will contribute to the longevity and functionality of your vehicle.
This complete front panel is suitable for first-generation VW Combi Bay Window from 08/1967 to 07/1972 up to chassis no. 213 2300 000.High-quality product.

Rear panel for Mercedes W123 Saloon and C123 Coupé
(Not for S123 Estate)

Front metal panel for Mercedes C Class Type W202 Saloon and Type S202 Estate

Left headlight mounting surround,
for Mercedes C Class Type W202 Saloon and Type S202 Estate

Right headlight mounting surround,
for Mercedes C Class Type W202 Saloon and Type S202 Estate

For Mercedes C Class Type W202 Saloon and Type S202 Estate