Trunk seals

Body gasket for sealing the bodywork to the rear boot on Volkswagen Golf 1 Cabriolet

This tailgate gasket for Renault 4 (10/1961-12/1993) is compatible with all 4L sedans.this tailgate gasket for R4 is faithful to the original and seals the bottom of the tailgate for all 4L sedans.

The tailgate door seal for a VW Combi is a crucial part of the tailgate door seal. It prevents water, dust and cold air from entering the cabin, while allowing the door to close tightly. This seal is particularly important for VW Combi models, as the tailgate is exposed to the elements, which can lead to water ingress if the seal is worn or defective.
The main role of the gasket is to provide a seal between the tailgate and the rest of the bodywork, preventing water, dirt and moisture from entering the vehicle interior, thus protecting the passenger compartment and electrical components.A good seal prevents moisture from accumulating in sensitive areas of the body, which can lead to rust in the long term.The seal also contributes to the vehicle's acoustic insulation , reducing wind noise and air infiltration when the tailgate is closed.By providing better insulation, it helps to maintain a more stable temperature inside the vehicle, especially when driving in cold weather.
Your tailgate seal is defective if water leaks into the passenger compartment after a rainstorm or vehicle wash.Visually, there may be chafing or cracks in the seal (leaving gaps through which water can enter).As with all rubber gaskets, the tailgate surround gasket can wear down over time. So check its condition regularly, and replace it as soon as it shows signs of cracking or deterioration, to ensure a good seal.
To replace the gasket, start by removing the old one. If the gasket is glued, you may need to use a solvent to remove any remaining glue, dirt, rust and any adhesive residues that could prevent the new gasket from adhering properly.Take the new gasket and place it around the tailgate frame.Once the gasket is in place, close the tailgate and check for a good seal. Make sure there are no gaps or areas where water could still seep in.Once the seal has been installed, perform a water test to check for leaks. This can be done by watering the vehicle or exposing it to the rain.
The rubber gasket is highly resistant to weathering, extreme temperatures and wear, guaranteeing good durability.
This tailgate gasket fits VW Combi Bay Window from 08/1967 to 07/1971 up to chassis no. 211 2300 000.

Rear hatch washer hose and cable gland for VW Golf 2 :

- All petrol and diesel models from 08/1983 to 10/1991

This protective rubber sleeve linking the body to the tailgate protects the wiring harness on one side and the windshield washer hose on the other.

Dimensions :
- 22 / 14 / 31,1 x 21

Quantity required per vehicle: 2

This product is sold individually.

Upper tailgate gasket for VW Combi Split from 1950 to 07/1963

These rear boot seals for 2cvs from 1957 to 1970 are compatible with 2cv saloons.

From the 1957 2cv AZLP to the end of production, these rubber gaskets keep the rear boot watertight.
This set includes 3 gaskets:
- 2 side gaskets
- lower gasket.

Boot gasket for Bmw 6 Series:
- Compatible with all Bmw 6 Series E24 versions from 10/1975 to 04/1989 including 635 Csi engine code m30.

Tailgate joint for VW Transporter T5 from 2003 to 2005.

Soft top boot gasket for Bmw 3 Series:
- Compatible with all Bmw 3 Series E30 Cabriolet versions from 07/1985 to 04/1993 including sport model type M3 E30 engine code s14.

Flexible tailgate boot for VW Transporter T25 / T3 from 05/1979 to 07/1992.

The tailgate door seal for a VW Combi is a crucial part of the tailgate door seal. It prevents water, dust and cold air from entering the cabin, while allowing the door to close tightly. This seal is particularly important for VW Combis, as the tailgate is exposed to the elements, which can lead to water ingress if the seal is worn or defective.
The main role of the gasket is to provide a seal between the tailgate and the rest of the bodywork, preventing water, dirt and moisture from entering the vehicle interior, thus protecting the passenger compartment and electrical components.A good seal prevents moisture from accumulating in sensitive areas of the body, which can lead to rust in the long term.The seal also contributes to the vehicle's acoustic insulation , reducing wind noise and air infiltration when the tailgate is closed.By providing better insulation, it helps to maintain a more stable temperature inside the vehicle, especially when driving in cold weather.
Your tailgate seal is defective if water leaks into the passenger compartment after a rainstorm or vehicle wash.Visually, there may be chafing or cracks in the seal (leaving gaps through which water can enter).As with all rubber gaskets, the tailgate surround gasket can wear down over time. So check its condition regularly, and replace it as soon as it shows signs of cracking or deterioration, to ensure a good seal.
To replace the gasket, start by removing the old one. If the gasket is glued, you may need to use a solvent to remove any remaining glue, dirt, rust and any adhesive residues that could prevent the new gasket from adhering properly.Take the new gasket and place it around the tailgate frame.Once the gasket is in place, close the tailgate and check for a good seal. Make sure there are no gaps or areas where water could still seep in.Once the seal has been installed, perform a water test to check for leaks. This can be done by watering the vehicle or exposing it to the rain.
The rubber gasket is highly resistant to weathering, extreme temperatures and wear, guaranteeing good durability.
This tailgate surround gasket is suitable for VW Combi Split from 08/1963 to 07/1967.

Classic Line trunk drain gasket for Mercedes R107, W116, W121, W123, W124 and W201.
Water drainage gasket located on the bottom of the trunk.
Assignments : - SL R107 all models from 1971 to 1989- SLC C107 all models from 1972 to 1981- S W116 all models from 1972 to 1980- SL 190 W121 all models from 1955 to 1963- W123 all models from 1976 to 1985- W124 all models from 1984 to 1993- 190 W201 all models from 1982 to 1993

Rear boot gasket for Mercedes W123

For W123 Saloon all models

A worn or cracked gasket can cause water to seep into your boot!

Boot gasket for Mercedes SL R107

For Mercedes SL R107 all models (1971-1989)

This gasket should be positioned on the inside of the boot to seal the rear boot

Boot gasket for Mercedes

For Mercedes W113 Pagoda all models (1963-1971)

This gasket should be positioned on the inside of the boot to make the rear boot watertight

For E10 1502 to 2002 Turbo Saloon (2 doors) and Cabriolet
(Not for Touring)

Boot gasket for BMW 5 Series E28:
- Compatible with all models from 09/1980 to 12/1987
The rear trunk seal is subject to inevitable aging and settling due to its composition. The resulting leaks can lead to corrosion of internal sheet metal and trunk underpinnings. This high quality gasket provides a perfect seal, protecting the interior of the trunk from external aggressions (rain, dust...).

Boot gasket for Mazda MX-5 NA

Fits all NA models

This gasket keeps your boot watertight when closed. A worn or cracked gasket can cause water to seep into your boot!

Also remember to check the condition of your rear light seals

Genuine Mazda part

Boot gasket for:
- MX5NB and NBFL

Genuine Mazda part.

Adaptable boot gasket for MX5 NA

- Sold by the metre
- Metal frame profile
- Cellular E.P.D.M profile
- Colour: Black
- Bead width: 16mm
- Bead height: 14.6mm
- Height of metal profile: 12.4mm
- Centre distance: 7.6mm and 8.4mm