Chassis seal

Over time, braids and screw covers wear out, yellowing, cracking and finally cracking. Unprotected screws fixed to the angle iron between the walls and the roof, or to the edges of doors and gates, end up letting rainwater seep inside your caravan. This is why we recommend Replacing screw covers before they tear becomes a necessity.

Width: 12 mm.
Color: white.
Made of plastic
Sold by 4 strips of 20 meters (80 meters total).

Over time, braids and screw covers wear down, yellowing, cracking and finally cracking. Unprotected screws fixed to the angle iron between the walls and the roof, or to the edges of doors and gates, end up letting rainwater seep inside your caravan. This is why we recommend Replacing screw covers before they tear becomes a necessity.

Width: 12 mm.
Color: gray.
Made of plastic
Sold by 4 strips of 20 meters (total 80 m).

Screw kit for hull/chassis mounting including :

- 1 German quality rubber chassis gasket L=6.40m
- 4 rubber bases between front axle and body
- 2 top plates between front axle and body
- 2 metal spacer plates between front axle and body
- 2 lower base plates between rear axle and body
- 22 washers for fastening hull/chassis screws
- 22 lathe screws for chassis mounting
- 22 body tower retaining plates
- 4 long chassis nose bolts
- 4 washers

For Volkswagen Beetle Sedan and Cabriolet, Karmann-Ghia coupé and Cabriolet, type 3 and Kûbel 181

1 Conical base wheel bolt 12x150 to rim originally England

Rubberseal chassis, the best for sealing.
Is placed between the body and chassis,sold in rolls.

For:
- Beetle Berline & Cabriolet all models
- Karmann-Ghia Coupé & Cabriolet all models
- Type 3 & 181 all models

Body gaskets on rear axle
Thickness 10mm
Sold in packs of 4

For VW Beetle

Suitable for:
- Golf 1 Saloon and Cabriolet
- Scirocco 1

Bodywork fixing screw on the chassis. Sold per unit.

For VW :
- German Beetle : need 18
- Mexican Beetle : need 22
- Karmann-Ghia type 14 : need 24
- Karmann-Ghia type 34 : need 24
- Type 3 tous modèles : need 24
- Kübel 181 (Thing) : need 26
- Fridolin : need 22

6-sided screw for attaching the hull to the front frame at the level of the Napoleon cap.
M10 x 45 x 20
Sold individually. Need 4 per vehicle.

For VW Beetle, Karmann-Ghia, type 3, Kûbel 181, Fridolin.

Keeps the pipe and avoid the deterioration of pipes with vibration and rubbing against the chassis.
It is necessary 4 gaskets for one Beetle
It is necessary 8 gasketsfor one Kombi

Rectangular plate for fixingchassis screw. Sold per unit.

For VW :
- German Beetle : need 18
- Mexican Beetle : need 22
- Karmann-Ghia type 14 : need 24
- Karmann-Ghia type 34 : need 24
- Type 3 tous modèles : need 24
- Kübel 181 (Thing) : need 26
- Fridolin : need 22

Upper rubber base plates for between the front suspension and undercarriage (fixtures accessible via the boot). Sold as a pair.

For VW Beetle 1200, 1300, 1500
Years: from 08/1960->
Chassis: from no. 3 192 507->

Bottom rubber gaskets between front axle and body (under hull). Sold in pairs.
Thickness: 10mm

For VW Beetle 1200, 1300, 1500
Years : since 08/1960->
Chassis : since N° 3 192 507->

Rubber for clutch and gas pedal cable routing on rear chassis

For VW Beetle and Karmann-Ghia
Years since 02/1958 ->
For VW 181 Kübel
Years: up to ->10/1970

The bellows may have 3 holes.

Protective rubber for the electrical bundles in the front bulkhead, beside the steering column.

For VW Beetle from 08/1964->
Chassis: from no. 115 000 001->

Useful for plugging an antenna or wing hole with a diameter of 15 mm, or for safely passing a set of wires or a pipe (max. 10 mm) through a metal wall.- total thickness 6 mm- max. overlap diameter 22 mm

Pair of spacers for attaching the shell/chassis to the top of the rear axle, on either side of the rear wheel arches.
These stops prevent the silentblocks from being crushed when the shell is tightened to the chassie using the M10 x 30 hexagonal screw.

For VW Cox and Karmann-Ghia, (08/1971-)

Called Body Lift, this kit of 4 welded shims raises the body by 7.62cm (3") on the chassis, Baja-style. Supplied with assembly kit.

For VW :
- Beetle Sedan all years
- Buggy with long Cox chassis

Please note that the kit may require modification to fit the chassis.

Rear crossmember end cap.
Sold individually, 1 required per side

For VW Beetle and Karmann-Ghia
Years: 08/1970 ->

This plastic cover is located in several places on the holes behind the bumper to protect the rear corners from rust, and to block the drain hole for the battery holder on the rear corners.Suitable for VW Combi Bay Window from 08/1967 to 07/1979.