Accelerator

Accelerator pedal for cable control or via potentiometer

For E36 with manual or automatic gearbox:
- All models, including M3
(except RHD: right-hand drive)

Accelerator pedal for Bmw z3 E36:

- Compatible with all Bmw z3 E36 Coupé and Roadster versions from 12/1994 to 06/2002 including z3 M engine code s54.

Warning! Not suitable for RHD right-hand drive.

Accelerator pedal for cable or potentiometer control.

Accelerator pedal alone, original type

For:
- VW Combi Split Brazil (1957-1975)

Accelerator pedal for Porsche 911 type G :

- 911 2.7 from 1974 to 1977
- 911 S 2.7 from 1974 to 1977
- 911 Carrera 3.0 from 1976 to 1977
- 911 SC 3.0 from 1978 to 1983
- 911 Carrera 3.2 from 1984 to 1989
- 911 Turbo 3.0 from 1976 to 1977
- 911 Turbo 3.3 from 1978 to 1989

Original bare accelerator pedal for VW Combi Bay Window from 08/1967 to 07/1972.

Accelerator pedal for Porsche :
- 924 from 1977 to 1988
- 944 from 1983 to 1991

Accelerator pedal for:
- 911 all models from 1965 to 1976
- 912 all models
- 914 all models

Cable throttle control,

For E21 with manual or automatic gearbox:
- All models
(except RHD: right-hand steering wheel)

Throttlepedal for Bmw E3:
Bmw E3:
- 2.8L 6cyl 170hp from 09/1973 to 02/1977 (engine code m30)- 2500 6cyl 150hp from 07/1969 to 02/1977 (engine code m30)- 2800 6cyl 170hp from 09/1973 to 02/1975 (engine code m30)- 3.0L 6cyl 180hp from 12/1974 to 02/1977 (engine code m30)- 3.0S 6cyl 180hp from 05/1971 to 02/1977 (engine code m30)- 3.0Bav 6cyl 180hp from 09/1973 to 07/1974 (engine code m30)- 3.0si 6cyl 200hp from 09/1973 to 02/1977 (engine code m30)- 3.3L 6cyl 190hp from 10/1973 to 08/1975 (engine code m30)- 3.3Li 6cyl 200hp from 07/1975 to 02/1977 (engine code m30)

Accelerator pedalforBmw E9 : -   ;Compatible with all Bmw E9 versions from 09/1973 until 11/1975 including 3.0 Csi engine code m30.

For Saloon:
- 1502 / 1600 / 1600 ti / 1602 / 1802 / 2002 / 2002 Ti

For Touring:
- 1602 / 1802 / 2000 / 2002

For Cabriolet:
- 1600 / 2002

Throttlepedal for Bmw 6 Series:
Bmw 6 Series E24:
- 628 csi 184hp from 06/1979 to 09/1980 (engine code m30)- 630 cs 185hp from 10/1975 to 08/1979 (engine code m30)- 630 csi 174hp from 06/1976 to 09/1977 (engine code m30)- 633 csi 200hp from 10/1975 to 09/1980 (m30 engine code)- 635 csi 218hp from 12/1977 to 09/1980 (engine code m30)
Warning! Not suitable for RHD right-hand drive versions.

Accelerator pedal for Volkswagen Golf 3 and Vento
For VW Golf 3 and Vento all left-hand drive models from 1992 to 1997
Original Volkswagen part

This floor-mounted accelerator pedal for 2cv and derivatives from 1970 to 1977 provides a temporary replacement for the original long pedal before switching to the fully suspended pedals.

the brake and clutch pedals have been suspended since 1970.

This suspended accelerator pedal for 2cv (1978-1991) is compatible with all 2cv models and derivatives with accelerator cables. This suspended accelerator pedal and the connection to the carburettor by cable is commonly found on the 2cv and its derivatives from 1978

This complete suspended pedal set for 2cv and derivatives from 1978 onwards is faithful to the original.
It is compatible with all 2CV models and derivatives with two or three suspended pedals.
A quality reproduction, it does not include springs or pads and will require that you replace cables and hardware in order to get full benefit from a new crank set.

This complete suspended pedal set for 2cv from 1966 to 1978 is faithful to the original.
It is compatible with all 2CV models and derivatives with two or three suspended pedals.
A quality reproduction, it does not include springs or pads and will require that you replace cables and hardware in order to get full benefit from a new crank set.

This floor-mounted accelerator pedal for 2CV Van from 1970 to 1977 provides a temporary replacement for the original long pedal before switching to the fully suspended pedals.

the brake and clutch pedals have been suspended since 1970.

This complete suspended pedalboard for 2cv Van from 1966 to 1978 is faithful to the original.
It is compatible with all 2CV models and derivatives with two or three suspended pedals.
A quality reproduction, it does not include springs or pads and will require that you replace cables and hardware in order to get full benefit from a new crank set.

This floor-mounted accelerator pedal for DYANE from 1970 to 1977 provides a temporary replacement for the original long pedal before switching to the fully suspended pedals.

the brake and clutch pedals have been suspended since 1970.