Transmission shaft

Spacer for cardan nut diameter 100 mm
arises between two fixing screws
Need 3 per head cardan.

Spacer for shaft drive nut diameter 90 mm
arises betweentwo fixing screws
Need 3 per head cardan.

For Golf 1 and 2, Jetta 1 and 2:
- All models

For Golf 3 and Vento:
- 1.4 60hp (ABD, AEX)
- 1.6 75hp and 100hp (ABU, AEA, AEE, AEK, AFT, AKS)
- 1.8 75hp and 90hp (AAM, ABS, ADZ)
- 1.9 D/TD/TDi 64hp, 75hpand90hp (1Y, AEY, AAZ, 1Z, AHU, ALE)
- 1.9 TDi 110hp (AFN)

For Passat 1 (type 32/33):
- All models from chassis 3242310590->

ForPassat 2 (type 32B):
- All models

For Passat 3:
- All (except4A, PG, AAA, ABF, AFN)

For Polo (type 86 and 86C):
- All models

Universal joint fixing screw
Type M10 x 48 mm
Head for Multipans wrench (XZN)

M8x50 Cardan screw for Porsche 911 :

- 911 2.7 from 1975 to 1977
- 911 2.7 S from 1975 to 1977
- 911 Carrera 2.7 from 1975 to 1977
- 911 Carrera 3.0 from 1976 to 1977
- 911 3.0 SC from 1978 to 1983

Quantity required per cardan : 12

Drive shaft plate for:
- 911 from 1969 to 1989
- 930 from 1984 to 1989
- 964 Carrera 2
- 964 Turbo
- 928 from 1985 to 1995

Driveshaft for Porsche 911 type G from 1985 to 1989 :
- 911 Carrera 3.2 from 1985 to 1986 only with 915.72 and 915.73 gearboxes- 911 Carrera 3.2 from 1987 to 1989
The driveshaft is sold individually and is suitable for either left or right side. Bellows and screws are included.

Nylon protective cap for Citroën DS transmission shaft bearing.

Self-tightening flange nut for holding the CV head on the wheel side of the hub carrier.

12-sided: 30 mm
Internal thread: M20 x 1.5 mm

Compatible with Volkswagen Golf 4 and Bora:
- 1.4 75hp (AHW, AKQ, APE, AXP, BCA)
- 1.6 100hp (AEH, AKL, APF)
- 1.6 102hp (AVU, BFQ)
- 1.6 105hp (ATN, AUS, AZD, BCB)
- 1.6 110hp (BAD)
- 1.8 125hp (AGN)
- 1.8 Turbo 150hp (AGU, ARZ, AUM)
- 1.8 Turbo 180hp (AUQ)
- 1.9 SDi 68hp (AGP, AQM)
- 1.9 TDi 90hp (AGR, ALH)
- 1.9 TDi 100hp (ATD, AXR)
- 1.9 TDi 110hp (AHF, ASV)
- 1.9 TDi 115hp (AJM, AUY)
- 1.9 TDi 130hp (ASZ)
- 1.9 TDi 150hp (ARL)
- 2.0 115hp (APK, AQY, AZG, AZH, AZJ, BEH)
- 2.3 150hp (AGZ)
- 2.3 170hp (AQN)
- 2.8 204hp (AQP, AUE, BDE)

Self-tightening flange nut for holding the CV head on the wheel side of the hub carrier.

12-sided: 30 mm
Internal thread: M20 x 1.5 mm

Compatible with Seat Leon type 1M:
- 1.4 75hp (AHW, APE, AXP, BCA)
- 1.6 100hp (AEH, AKL)
- 1.6 102hp (BFQ)
- 1.6 105hp (AUS, AZD, BCB)
- 1.8 125hp (AGN, APG)
- 1.8 Turbo 180hp (AJQ, APP, ARY, AUQ)
- 1.8 Turbo 210hp (AMK)
- 1.9 SDi 68hp (AQM)
- 1.9 TDi 90hp (AGR, ALH)
- 1.9 TDi 100hp (AXR)
- 1.9 TDi 110hp (AHF, ASV)
- 1.9 TDi 130hp (ASZ)
- 1.9 TDi 150hp (ARL)
- 2.3 150hp (AGZ)
- 2.3 170hp (AQN)
- 2.8 204hp (AUE, BDE)

Self-tightening flange nut for holding the CV head on the wheel side of the hub carrier.

12-sided: 30 mm
Internal thread: M20 x 1.5 mm

Compatible with Skoda Octavia type 1U:
- 1.4 60hp (AMD)
- 1.4 75hp (AXP, BCA)
- 1.6 75hp (AEE)
- 1.6 100hp (AEH, AKL)
- 1.6 102hp (AVU, BFQ)
- 1.8 125hp (AGN)
- 1.8 Turbo 150hp (AUM, AGU, ARX, ARZ)
- 1.8 Turbo 180hp (AUQ)
- 1.9 SDi 68hp (AGP, AQM)
- 1.9 TDi 90hp (AGR, ALH)
- 1.9 TDi 100hp (ATD, AXR)
- 1.9 TDi 110hp (AHF, ASV)
- 1.9 TDi 130hp (ASZ)
- 2.0 115hp (AEG, APK, AQY, AZH, AZJ)
- 2.0 120hp (ATF)

Self-tightening flange nut for holding the CV head on the wheel side of the hub carrier.

12-sided: 30 mm
Internal thread: M20 x 1.5 mm

Compatible with Volkswagen New Beetle Cabriolet type 1Y:
- 1.4 75hp (BCA)
- 1.6 102hp (BFS)
- 1.8 Turbo 150hp (AWU, AWV, BKF)
- 1.9 TDi 100hp (AXR)
- 1.9 TDi 105hp (BSW)
- 2.0 115hp (AZJ, BDC, BEV, BGD)
- 2.5 150hp (BPR, BPS)

Compatible with Volkswagen New Beetle Saloon type 1C/9C:
- 1.4 75hp (BCA)
- 1.6 100hp (AWH)
- 1.6 102hp (AYD, BFS)
- 1.8 Turbo 150hp (AGU, APH, AVC, AWU, AWV, BKF)
- 1.8 Turbo 180hp (AWP, BNU)
- 1.9 TDi 90hp (ALH)
- 1.9 TDi 100hp (ATD, BEW)
- 1.9 TDi 105hp (BSW)
- 2.0 115hp (AEG, APK, AQY, AVH, AZG, AZJ, BEJ, BER, BEV, BHP, CBPA)
- 2.3 170hp (AQN)
- 2.5 150hp (BPR, BPS)

Self-tightening flange nut for holding the CV head on the wheel side of the hub carrier.

12-sided: 30 mm
Internal thread: M20 x 1.5 mm

Compatible with Volkswagen Passat 35i:
- 1.9 TDi 110hp (AFN)
- 2.0 16s 150hp (ABF)
- 2.8/2.9 VR6 174/190hp (AAA, ABV)

Self-tightening flange nut for holding the CV head on the wheel side of the hub carrier.

12-sided: 30 mm
Internal thread: M20 x 1.5 mm

Compatible with Volkswagen Polo:
- 1.0 50hp (AER, ALL)
- 1.1 45hp (AEV)
- 1.3 54hp (ADX)
- 1.4 54hp (ANX)
- 1.4 60hp (AEX, AKV, APQ)
- 1.4 100hp (AFH)
- 1.6 75hp (AEA, AEE, AHS)
- 1.6 120hp (AJV)
- 1.7 Diesel 57hp (AHG)
- 1.7 Diesel 60hp (AKU)
- 1.9 Diesel 64hp (AEF, AGD)

Compatible with Volkswagen Polo 6N2:
- 1.0 50hp (ALD, AUC)
- 1.4 54hp (AKP)
- 1.4 60hp (AKK, AUD)
- 1.4 75hp (AHW, AMF, APE, AUA)
- 1.4 Diesel 90hp (ATL)
- 1.4 100hp (AFK, AQQ, AUB)
- 1.6 125hp (ARC, AVY)
- 1.7 Diesel 60hp (AKU)
- 1.9 Diesel 64hp (AEF, AGD, ASX)

For Passat 3 with manual gearbox:
- 1.6 100hp
- 1.8
- 1.9 Diesel 64hp (1Y)
- 1.9 turbo Diesel 75hp (AAZ)
- 1.9 TDi 90hp (1Z, AHU)
- 2.0

For Passat 3 with automatic gearbox:
- 1.8
- 2.0

For Passat 3 with manual gearbox:
- 1.6 100hp
- 1.8
- 1.9Diesel 64hp (1Y)
- 1.9 turbo Diesel 75hp (AAZ)
- 1.9 TDi 90hp (1Z, AHU)
- 2.0

For Passat 3 with automatic gearbox:
- 1.8
- 2.0

For Golf 4 and Bora with manual gearbox:
- 1.8 petrol
- 1.9 TDi 90hp, 100hp and 110hp
- 2.0 petrol

For New Beetle with manual gearbox:
- 1.9 TDi 90hp and 110hp
- 2.0 petrol

For Golf 4 with manual gearbox:
- 1.8 petrol
- 1.9 TDi 90hp, 100hp and 110hp
- 2.0 petrol

For New Beetle with manual gearbox:
- 1.9 TDi 90hp and 110hp
- 2.0petrol

Length: 553 mm

Length: 818 mm