Fan and auxiliary heating

Compact auxiliary device to heat your vehicle's passenger compartment and to de-ice the windscreen. Moveable version on base.
Power supply: 12 volts with plug.
Power: 150 watts

This practical pretensioner is the ideal accessory for a butane installation with a safety regulator.
Includes 300 mbar pressure limiter.
Max. flow 2.6 kg/h.
Cylinder inlet/outlet nut 20 x 1.5.

Don't wait until you're cold in your motorhome, van or caravan!
The 750-1500W/230V ceramic heater is the perfect complement to your existing heating system.
Compact and high-performance, it's equipped with a temperature control thermostat and an overheating safety device.
Scalable power: 750W - 1500W.
Multifunction: cool/warm/ambient ventilation.
Voltage: 230V.
Power: 750-1500W.
Dimensions(LxWxH): 220x215x223 mm.
Weight: 2 kg.

Aerate the hot air inside your vehicle with this oscillating fan. Connected to the cigarette lighter socket or any other 12-volt outlet, you can adjust the fan's position using the adjustable foot. With a fixed or oscillating position , you can adjust the ventilation field.
With screw-on base (4 screws supplied).
Power cord length: 1 m.
Power consumption: 21W.
Connection to cigar lighter socket or other 12V outlet.

Ideal for a practical way to heat your camper, van or caravan.
Safety switch in case of overheating.
Carry handle.
It is possible to turn on a single tube (300 W) or two tubes (600 W).
Voltage : 220V.
Power: 300 - 600 W.
Dimensions (lxwxh): 235x130x320 mm.
Weight: 800 Gr.

Ideal to complete the heating of your motorhome, campervan or caravan.
This small but powerful heater offers 2 heating levels (750 W and 1500 W).
With a LED display, it has a 12-hour programming timer, a temperature regulator and an overheating protection device.
Voltage: 230 V.
Power: 750/1500 W.
Dimensions (LxWxH): 220 x 120 x 290 mm.
Weight: 1.8 kg.

Outlet, EN nozzle for heater ventilation for campers, caravans, vans.
Without air valve.
Diameter 65-72mm.
Colour: agate grey.

Truma 40171-07

High pressure gas valve 1 way for gas pipe diam: 8 mm.
1-way gas valve, type K8.
Inlet (internal) ø 8 mm, exhausts (internal) ø 8 mm.
Comes without nut or olive, available as an option.
Sold individually.

Truma 23112-31

Threaded connector fitting, Male 20 x 1.5
Double male connector to mount on bottles.
2 male threads: 20 x 150.
In brass.
Sold individually.

Metal tube providing warm air circulation and heat dispersionthroughout the camper van, van or caravan.
Insulating sheath. TRUMA ÜR.
Dimensions: inside : 60 mm - outside : 65 mm.
Sold by the metre.

TRUMA 60APL90B001
 

Right clamp fitting for 8 mm pipe.
Straight fitting, steel, without solder.
For rigid pipe ø 6/8 mm.
2 ø 6/8 mm bicones.
Sold individually.

GOK: 0750200
 

Enjoy the comfort of efficient heating in your motorhome, van or caravan. 
With its automatic rotation, it diffuses heat throughout the surrounding area. It is also compact and lightweight.
With variable speed drive and switch.
Equipped with a safety device that cuts off the power supply if it is covered or knocked over.
Progressive power adjustment: 600-1200 W.
Voltage: 230V.
Dimensions (LxWxH): 178x123x242 mm.
Weight: 1.5 kg.

Set of 10 joints P2 couplings 20x150.
For 20 x 150 couplings.
Sold in sets of 10.

T TS connector for heater ventilation for campers, caravans, vans.
For 65 mm diameter tube.
Connector: 65-72 mm.
Colour: agate grey.

Truma 40151-01

Straight UM connector for heater ventilation for campers, caravans, vans.
For 65 mm diameter tube.
Diameter 65-72 mm.
Colour: agate grey. 

Truma 40161-01

This Ermeto brass fitting connects a 10 mm diameter rigid gas pipe to an installation with a 20x1.5 male fitting.
Fittings: 10 mm female twin-cone screw fitting

For the protection of the TRUMATIC S2200 heater suction cup.
For AKW2 suction cup.

Truma ref. 70122-01

Straight clamp fitting for 8 & 10 mm pipe.
Straight fitting, steel, without solder.
For rigid pipe ø 8/10 mm.
2 ø 8/10 mm bicones.
Sold individually.

GOK: 0776800

Hose connection P327, 57 mm long for multivalves. 
8mm hose connection to change an olive exit to a hose exit. 
Sold individually.

The P45/36 20x1.5 nipple is used to connect a pressure reducer with a 20x1.5 outlet to an 8 mm flexible gas hose.
P 45/36.
High-pressure propane.
Sold individually.