Gauge support

Support unit to fit a 52 mm diameter gauge
Black plastic, tiltable, it enables an additional gauge to be fitted on or under your instrument panel. Short version
Length: 62 mm. Height with base: 75 mm

Metal plate for retaining 1 pressure gauge 52 mm in diameter
Chrome finish.
Universal support, to be mounted under the instrument panel.

Metal plate for retaining 2 pressure gauges 52 mm in diameter
Chrome finish.
Universal support, to be mounted under the instrument panel.

Metal plate for retaining 3 52 mm diameter pressure gauges
Chrome finish.
Universal support, to be mounted under the instrument panel.

Metal support, chrome finish
For 52 mm gauge/dial
Can be fitted on left or right-hand side.
(Support sold without dial)
On 40 mm diameter steering column
(non-adjustable, add foam or rubber for a smaller column).

Metal support, ivory colour
For 52 mm gauge/dial
Can be fitted on left or right-hand side.
(Support sold without dial)
On 40 mm diameter steering column
(non-adjustable, add foam or rubber for a smaller column).

Metal support, black
For 52 mm gauge/dial
Can be fitted on left or right-hand side.
(Support sold without dial)
On 40 mm diameter steering column
(non-adjustable, add foam or rubber for a smaller column).

Platine en métal pour le maintien de 1 manomètre diamètre 52 mm
Finition en peinture noire.
Support universel, à fixer sous le tableau de bord.

Metal support for attaching a 67mm (2 5/8" inches) pressure gauge of the Auto-Meter type. Black finish.
Universal mount for fixing under the dashboard.

Platine en métal pour le maintien de 2 manomètre diamètre 52 mm
Finition en peinture noire.
Support universel, à fixer sous le tableau de bord.

Metal plate for retaining 3 52 mm diameter pressure gauges
Black paint finish.
Universal support, to be mounted under the instrument panel.

Rotatable about 360°
Tiltable by 270°
For dials measuring 52 mm

Boitier simple pour installer 1 manomètre diamètre 52 mm
Plastique noir.
Support universel, à fixer sur le tableau de bord.

Twin unit to fit 2 52 mm diameter gauges
Black plastic.
Universal support, to be mounted on the instrument panel.

Twin unit to fit 3 52 mm diameter gauges
Black plastic.
Universal support, to be mounted on the instrument panel.

Mecatechnic can finally offer you this reproduction dashboard grill.
Located to the right of the speedometer, this grill serves as a support for the square mechanical fuel gauge dial.

For VW Beetle 1200
Years: (08/1957-)

Ventilation nozzle with pressure gauge holder for Volkswagen Golf 2
For VW Golf 2 all models
Based on the design of the original air vents, this bracket allows you to discreetly integrate a 52mm diameter pressure gauge on your dashboard.

Dial holder diameter: 1 x 52 mm
Replaces the original grille on the right-hand side of the speedo.

For VW Beetle 1200, 1300, 1302
Years : since 08/1957->
Chassis : since N° 1 600 440-> (except 1303).

Dial holder diameter: 1 x 52 mm
Replaces the original grille on the left-hand side of the speedo.

For VW Beetle 1200, 1300, 1302
Years : since 08/1957->
Chassis : since N° 1 600 440-> (except 1303).

Dial holder diameter: 1 x 80 mm
Replaces the original grille on the left-hand side of the speedometer.

For VW Beetle 1200, 1300, 1302
Years : since 08/1957->
Chassis : since N° 1 600 440-> (except 1303).