Indoor table

Fitting out your van with a table can be complicated. Fortunately, we've come up with the solution with this table top rail . Another wall rail (available as an optional extra) can be installed on the bulkhead of your van. 
By lifting the table rail , the table top can be suspended and moved.
Length: 49 cm.
Made of plastic.
Supplied without screws.

You want to install a table in your van. This accessory is perfect if you want to attach a table and/or tray to the inside wall of your vehicle.

You have 5 holes with an internal diameter of 3 mm to fix the part. Screws are not supplied.

Create a dining area in your van with this table and table-leg assembly set. It will fit perfectly into most vehicle interiors and consists of :
- A top-quality beechwood-effect table top in 75cm x 43cm x 2cm.
- A Table Legs Fiamma table-leg tube, 70cm high.
- A conical TABLE LEGS Fiamma table leg cup (to fix the table to the leg).
- A Legs Fiamma embedding cup (to securely position the stand in the vehicle).
- A Legs Fiamma tripod to enjoy the table outdoors, reusing the table base already attached to the table.
- Assembly kit for fasteners.

Option to use the table surface in the bed position.
To be attached to a unit or panel of the vehicle.
Made from anodised aluminium.
Rail length: 10cm

Fixes to the leg tube.
Protects floors and flooring from scratches.
Suitable for swivelling legs ref : CQ10134 & CQ10132.

Folding silver oval table leg 675 mm.
Highly articulated allowing the leg to be folded over.
Made from aluminium
Leg locking button. And adjustment screw at the top of the leg.
- Colour: silver.
It is possible to add an adjustment screw at the top of the leg
Height: 67.50 cm.
Sold individually.

Steelswivelling table leg.
For campers and caravans.
Made from zinc-plated steel.
Model for fixing to panel (screws not included).
Tabletop height: approx. 72 cm.
It is possible to shorten the tube.
Swivel range : approx. 40 cm.
Finish: grey epoxy.

Steel swivelling u-table leg.
For campers and caravans.
Swivels: the leg pivots on the sides.
A pivoting table support plate is optionally available.
Made from zinc-plated steel.
Delivered with 4 fixtures.
Adjustable height.
Swivel range : approx. 30 cm.
Tabletop height: 72 cm.

This ready-to-assemble kit adapts to all sizes of interiors and consists of:
- A quality beechwood effect table top, 75 cm x 43 cm x 2 cm.
- A Fiamma Table Legs tube, 70 cm in height.
- A conical Fiamma Table Legs fitting (to mount the table on the leg).
- A Fiamma Table Legs flush mount fitting (to position the leg in the vehicle with total security).
- A Fiamma Table Legs tripod to enjoy the table outdoors using the table leg already mounted on the table.
- The hardware required to mount the fittings.

Table extension support.
Without stopper.
Plastic.

Table-leg recessed cup plug.
This CAP stopper plugs the hole in the recessed cupola on the floor of the TABLE LEGS Fiamma set. 
Fitting diameter: 5 cm.
Weight: 0.1 KgFiamma 02411-01B

A new-generation telescopic table leg, the PRIMERO COMFORT Max. height: 705 mm, offers particularly comfortable handling: the clamping handle is attached to the underside of the tabletop, allowing the tabletop to be slid and lowered in a single, effortless movement. It is screwed to the floor. Lateral sliding of the tabletop makes it easy to use.
Aluminum column foot with compression springs.
For tops up to 1000x800 mm.
Floor-mounted version (120 mm centers).
Max. load: 80 kg (bed)/ 40Kg(table).
Sliding range: 360 mm.
Height (min/max): 345- 705 mm.
Weight: 11.5 kg.

PRIMERO COMFORT HVD is a telescopic aluminum table leg with a maximum height of 710 mm.
A new-generation table leg offering particularly comfortable handling: the clamping handle attaches to the underside of the tabletop, enabling the tabletop slide and descent to be controlled with a single gesture. Screwed to the floor. With lateral sliding of the tabletop.
Aluminum column foot with compression springs.
360° swivel foot.
Effortless handling.
For trays up to 1000x800 mm.
Floor-mounted version (120 mm centers).
Max. load: 80 kg (bed)/ 40 kg (table).
Sliding range: 360 mm.
Height (min/max): 345 - 710 mm.
Weight: 12.3 Kg.

This notched wall rail is ideal for fixing a table top to the wall of a motorhome, caravan or van. It secures the tabletop to the vehicle wall. 
Length: 71.5 cm.
Made of plastic.
Supplied without screws.
Sold individually.

For motorhome and caravan tables.
The table runner with braid and support allows the table to slide on its wall rail.
To be mounted on the rail attached to the wall part.
Supplied with silver braid and brackets.
Wall rail not included.

Dimensions:
Braid: Length: 950 mm.

Slide :
Jaw spacing is 1.7 cm.
Height: 4.7 cm.
Width: 5 cm.
Length: 6 cm.

A practical accessory for motorhomes, converted vans and caravans, this 250 mm-long sliding rail can be fitted under a bench top. It can be used to create a retractable table, ideal for eating, playing cards, etc. ... .
Dimensions (mm): 250.
Color alu / black.
Weight: 235 g.

Table extension support.
With stopper.
Plastic.

Complete set of interior fittings for your VW Combi Bay Window T2B from 1973 to 1979, very similar to an original assembly as offered by Westfalia at the time. Made of unfinished wood, you can leave it as is or paint it the color of your choice, the edges are brown.Top-quality local French manufacturing! The kit is delivered unassembled, and includes the kitchen unit, bench seat that can be converted into a bed, storage units, handles, hinges, hardware and detailed instructions... All included!The sink tray is not cut out, so you can mount the sink of your choice!Depending on your finish, particularly for the side trims, you'll still need to make some cut-outs and/or adjustments.What's not included in the kit: Foam and fabric for the bench seat, sink, refrigerator and vehicle fixings. After assembly, you'll need to have your converted Combi approved to comply with current standards (conversion from passenger car to light commercial vehicle).

Complete interior fittings kit for your VW Transporter T25 / T3, very similar to an original assembly as offered by Westfalia at the time.
In gray wood, it brings directly the color also proposed at the time.

Top-quality local French manufacture! The kit is delivered unassembled, and contains the kitchen unit, the bench seat which can be converted into a bed, the closet, the storage units, the removable table, handles, hinges, hardware and detailed instructions... All included!

The sink tray is not cut out, so you can mount the sink of your choice!

Assembly is almost plug-and-play

Original equipment tray for VOLKSWAGEN Transporter T4 from 1999 to 2003
Colour code: Bird's eye maple HTR