Motor screws

This short cylinder head stud for Dyane 4 - 210,5mm is a quality reproduction.

This cylinder head stud for Dyane 4 is made of chromed steel. Shorter than the studs for 602cc engines, it is specific to early Dyane models and Dyane 4s with 435cc engines.

Compatible models:
- DYANE (425) type AYA: 08/1967 to 01/1969
- DYANE 4 type AYA2: 03/1968 to 08/1975

Alternator belt tensioning screw for VW LT from 1989 to 1996 from chassis no. 29-K-023826

This intake and exhaust pipe stud for 2cv models and derivatives - M7x43 mm is compatible with all models.

This intake and exhaust pipe stud for 2cv before 1970 - M7x43 mm is compatible with all models.

This intake and exhaust pipe stud for 2CV Van - M7x43 mm is compatible with all models.

This intake and exhaust pipe stud for DYANE and Acadiane - M7x43 mm is compatible with all models.

This intake and exhaust pipe stud for Mehari - M7x43 mm is compatible with all models.

This intake and exhaust pipe stud for AMI 6 and AMI 8 cars - M7x43 mm is compatible with all models.

10 mm washer on stud to fasten the cylinder head
for engine types: 1, 2, 3,CT.Dimensions: 8.4 x 21 x 4 mm.
16 unitsrequired per engine, sold per unit.
Original Volkswagen Classic Parts.

For:
- Beetle, 1200, 1300, 1500, 1600cc
- Karmann-Ghia, 1500, 1600cc
- Type 3, 1500, 1600cc
- Kübel 181, 1500, 1600cc
- Combi, 1500, 1600cc
- Transporter T25 / T3, 1600cc (CT)

Thisexhaust manifold stud for Renault 4 (10/1961-12/1993) - 7mm is true to original.

This manifold stud for R4 is compatible with all models of Renault 4, with Cleon or Billancourt engine.

For 205 and 309 engine Xu except Diesel
For 306 engine XU7JP (1800 100cv)
For 405 engines XU5JP, XU5M, XU52C, XU92C, XU9J2

For 205/309/405 and 306 1600 and 1900 Diesel Engines XUD7, XUD9
For 405 and 306 XU10J2

Connecting rod bolts for Porsche 911 (1984-1989)

Exhaust manifold stud M10x1.5x25 for VW Polo 2 86C:

- 1.0L 45hp from 01/1985 to 09/1990 (engine code HZ)
- 1.3L 55hp from 08/1983 to 09/1990 (engine code MH)
- 1.3L 55hp from 07/1987 to 09/1990 (engine code NZ)
- 1.3L 75hp from 09/1982 to 09/1990 (engine code GK)
- 1.3L 75hp from 10/1989 to 09/1990 (engine code 3F)
- G40 1.3L 115hp from 01/1987 to 09/1990 (engine code PY)

Dimensions :
- Thread: M10
- Thread pitch: 1.5
- Thread length 1: 12mm
- Thread length 2: 25mm

This product is sold individually.

Set of 8 ARP Hi-Perf reinforced tie-rod studs for Mazda MX5 NA, NB and NBFL

- Made of 8740 chrome-plated molybdenum steel
- With a tensile strength of approximately 200.000 psi, they are five times more durable than the original studs
Sold in packs of 8

Cylinder head bolt for Mazda MX-5 NA, NB and NBFL

Fits all NA, NB and NBFL 1.6L and 1.8L models

It is very important that you replace the screws each time the cylinder head is removed. Please be careful as you must tighten these screws in a specific order and to a specific torque, so please refer to the Haynes manual to find out what order to do this in.

Sold individually.
10 screws per cylinder head
Original MAZDA part

Set of 10 cylinder head screws for Mazda MX-5 NA, NB and NBFL

Fits all NA, NB and NBFL 1.6L and 1.8L models

It is very important that you replace the screws each time the cylinder head is removed. Please be careful as you must tighten these screws in a specific order and to a specific torque, so please refer to the Haynes manual to find out what order to do this in.

German quality

Cylinder head cover screw for Mazda MX-5 NA

Suitable for MX5 NA all engines

You must tighten and loosen these screws in a specific order and with a specific torque. We recommend that you refer to the technical manual for the right order and these values

11 required for a complete rocker cover
Sold individually.

Original MAZDA part.

Cylinder head cover screw for Mazda MX-5 NB and NBL

Suitable for MX5 NB and NBFL all engines

You must tighten and loosen these screws in a specific order and with a specific torque. We recommend that you refer to the technical manual for the right order and these values

11 required for a complete rocker cover
Sold individually.

Original MAZDA part.

Tie-rod screw for:
- MX5 NC and NCFL

Original MAZDA part.