Rockers

Set of 8 long, reinforced chromoly steel rocker rods, to be cut to length when fitting an engine prepared with a long-stroke crankshaft or with offset rocker arm ramps.

Suitable for:
- E21 320 M20 and 323 i
- E30 320 i, 323 i and 325 e/i/iX
- E12 520 i
- E28 520 i, 525 e
- E34 520 i and 525 i engine M20

Original rocker arm stem. German quality.
Length: approx. 280mm
For type 1 engines: 1300 / 1500 / 1600cc, 37hp ->50hp
except 1200cc and 1600cc CT type.
Need 8 per engine, sold individually.

For Beetle, Karmann-Ghia, Type 3, Combi, 181
1300, 1500, 1302, 1303.

E36 :
- 320 i, 325 i / iC from 09/92 to 09/94 engine M50
- 318 iS/ Tds engines M41 & M42
- 325 TD / Tds from 09/92 engine M51 

E34 :
- 525 td / tds since 09/92 engine M51 
- 520i, 525 i / iX from 09/92 to 09/94 engine M50 

E39 :
- 525 Td / Tds engine M51

For E36:
- 320 i / iC from 09/94 engine M50 
- 320 i / C, 323 i / iC and 328 i / iC engine M52 

For E46:
- 320 i/iC, 323 i/iC, 325 i/iC, 328 i and 303 i/iC/iX engines M52 and M54 

For E34:
- 520 i and 525 i/iX from 09/94 engine M50 

For E39:
- 520 i, 523 i, 525 i, 528 i, 530 i and M5 engines M52 M54 S62-B50

Valve rocker for VW 4-cylinder flat-bed enginesAir-cooled- 1700, 1800, 2000cc (Type 4)Water-cooled- 1900cc (DF, DG, SP, EY)- 2100cc (DJ, MV, SR, SS)Suitable for 10 mm diameter hammerNeed 8 per engine, sold individually.Original Volkswagen Classic Parts.
For VW- Combi Bay Window, T2bYears 08/1971 ->07/1979- Transporter T25 / T3, Bus, Van,Caravelle, Syncro, Joker, CaliforniaYears 05/1979 ->07/1992
For Porsche :- 914-4

Valve adjustment screw for Porsche 914-4 :

European market :

- 914-4 1.7 from 1970 to 1973 from the engine No. W0 250 000
- 914-4 1.8 from 1974 to 1976
- 914-4 2.0 from 1973 to 1976

US market :

- 914-4 1.7 :
USA - 1973 - from engine N°EA0 089 762 to engine N°EA0 098 793
CAL - 1973 - from engine N°EB0 008 774 to engine N°EB0 010 020

- 914-4 1.8 :
USA and CAL - 1974 - from Engine N°EC0 000 001

- 914-4 2.0 :
USA - 1973/1974 - from engine N°GA0 005 473 to engine N°GA0 016 000
USA and CAL - 1975 - from Engine N°GC0 000 001

Quantity required per vehicle : 8

Engine Type 1 all displacements

FEBI valve eccentric washer for Bmw 7 Series E32 :

Bmw Serie7 E32 :

- 730i 6cyl 197hp from 07/1986 to 04/1994 (engine code m30b30)
- 730iL 6cyl 197hp from 12/1987 to 03/1994 (engine code m30b30)
- 735i 6cyl 220hp from 10/1985 to 07/1992 (engine code m30b35)
- 735iL 6cyl 220hp from 06/1987 to 07/1992 (engine code m30b35)

12 Eccentric washers for 6-cylinder engines.

This product is sold individually.

German quality.

FEBI valve eccentric washer for Bmw 7 Series:

- Compatible with all Bmw 7 Series E23 versions from 10/1976 to 06/1986 including 745i engine code m30.

Need 12 Eccentric washers for one engine.

Sold individually.

FEBI valve eccentric washer for Bmw E9: - Compatible with all Bmw E9 versions from 12/1968 to 11/1975 including 3.0 csl engine code m30. Requires 12 eccentric washers. Sold individually.

For E21:
- 315, 316, 318 and 318 i engine M10
- 320, 320 i and 323 i engine M20

For E30:
- 316, 316 i M10
- 318 i M10
- 320 i and 323 i M20
- 325 e / i / ix M20

For E34:
- 520 i and 525 i M20
- 530 i and 535 i M30

For E12:
- 518 and 518 i
- 520 and 520 i
- 525
- 528 and 528 i

For E28:
- 518 and 518 i engine M10
- 520 i, 525 e engine M20
- 525 i, 528 i, 535 i, M535 i engine M30

Eccentric valve rockerwasher FEBI for Bmw E3: - Compatible with all Bmw E3 versions from 08/1968 to 02/1977 including 3.0 Si engine code m30. 12 eccentric washers required. Sold individually.

FEBI valve rocker eccentric washer for Bmw 6 Series:

Bmw E24 :

- 628 csi 184hp from 06/1979 to 05/1987 (engine code m30)
- 630 cs 185hp from 10/1975 to 08/1979 (engine code m30)
- 630 csi 174hp from 06/1976 to 09/1977 (engine code m30)
- 633 csi 200hp from 10/1975 to 12/1981 (m30 engine code)
- 635 csi 218hp from 12/1977 to 04/1989 (engine code m30)

12 washers needed for one engine.

Sold individually.

To engine type 1

For VW engines:
- Type 1 Mexico from 1984->
from chassis no. ->11-E-119 816->
- 1600 cc (CT, CZ) 05/1979 ->12/1982
- 1900 cc (DF, DG, SP, EY) ->08/1988
up to chassis no. ->24-K-025 780.

Valve tappet for engine Type 1:
all cylinders: 1200, 1300, 1500, 1600cc
(1200 34hp from engine no. 5 000 001->)
Ratio: original 1/1.1
Intended for 8mm diameter hammer
Reconditioned original VW part.

Set of 8 forged rocker arms with ratio 1.25:1
For engine type 1: 1200-1600 with 8 mm diameter hammers.
For use with performance or original camshafts.

Allows greater valve opening, which in turn allows more mixture volume to pass through, better filling of the combustion chambers and therefore more performance!

Pair of complete, assembled, ready-to-fit rocker arms for Type 1, 2, 3 engines.
Ratio: 1:1.25

For VW :
- Beetle
- Karmann-Ghia
- Type 3
- Combi
- Transporter T3 / T25 (CT, CZ)

Rocker shaft spacer sleeve
for VW engine distributor
Air-cooled flat 4-cylinder:
2000cc (Type 4: GE, CU, CV)
Dimensions: 21 x 25 x 11mm
8 required per engine, sold by unit.
Original Volkswagen Classic Parts.

For VW:
- Combi Bay Window, T2b
Years:08/1976 ->07/1979
- Transporter T25 / T3, Bus, Van,
Caravelle, Syncro, Joker, California
Years: 05/1979 ->12/1982