Cylinder head bolt

Set of 14 cylinder head screws for Bmw E3: - Compatible with all Bmw E3 versions from 12/1968 to 02/1977 including 3.0 if engine code m30.
ATTENTION: Support washers not supplied!

We recommend that you replace the cylinder head bolts on your engine block after opening it for maintenance and/or repair (e.g. replacing the cylinder head gasket). These screws require a specific tightening procedure and cannot be reused on reassembly.

Set of 10 cylinder head screws for Bmw 8 Series : Bmw E31 : - 840 ci 286hp from 12/1994 to 05/1999 (engine code m62b44)
- 840 i 286hp from 12/1992 to 02/1996 (engine code m60b40)


ATTENTION: Support washers not supplied!

You will need to order 2 sets of 10 screws for the entire motor (i.e. 2 quantities to add to your basket).

We recommend that you replace the cylinder head bolts on your engine block after opening it for maintenance and/or repair (e.g. replacing the cylinder head gasket). These screws require a specific tightening procedure and cannot be reused on reassembly.

Complete set of 14 cylinder head bolts for BMW 3 Series E21, E30 and 5 Series E12, E28 and E34 with M20 6 cylinder petrol engine:

E21:
- 320-6 6cyl 122cv from 08/1977 to 12/1982 (engine code M20B20)
- 323i 6cyl 143cv from 07/1977 to 10/1982 (engine code M20B23)

E30 Sedan, Touring, Coupé and Cabriolet:
- 320i 6cyl 125cv phase 1 from 01/1982 to 08/1985 (engine code M20B20)
- 320i 6cyl 129cv phase 1 from 09/1985 to 08/1987 (engine code M20B20)
- 320i 6cyl 129cv phase 2 from 09/1987 to 04/1991 (engine code M20B20)
- 323i 6cyl 139cv phase 1 from 12/1981 to 08/1984 (engine code M20B23)
- 323i 6cyl 150cv phase 1 from 09/1984 to 09/1986 (engine code M20B23)
- 325e 6cyl 122cv phase 1 from 01/1985 to 09/1987 (engine code M20B27)
- 325i 6cyl 170cv phase 1 from 03/1985 to 08/1987 (engine code M20B25)
- 325i 6cyl 170cv phase 2 from 09/1987 to 04/1993 (engine code M20B25)
- 325ix 6cyl 170cv phase 1 from 02/1985 to 08/1987 (engine code M20B25)
- 325ix 6cyl 170cv phase 2 from 09/1987 to 12/1992 (engine code M20B25)

E12:
- 520-6 6cyl 122cv phase 2 from 08/1977 to 06/1981 (engine code M20B20)

E28:
- 520i 6cyl 125cv from 11/1980 to 12/1987 (engine code M20B20)
- 525e 6cyl 2.7l 125cv from 11/1982 to 12/1987 (engine code M20B27)

E34 Saloon:
- 520i 6cyl 129cv phase 1 from 06/1987 to 04/1990 (engine code M20B20)
- 525i 6cyl 170cv phase 1 from 06/1987 to 04/1990 (engine code M20B25)

We recommend that you replace the cylinder head bolts of your engine block after opening for maintenance and / or repair (cylinder head gasket replacement type ..). Indeed, these screws require a specific tightening procedure and cannot be reused during reassembly.

Victor Reinz cylinder head bolts for Bmw 1 Series :
Bmw 1 Series F20 :
- 114d 4cyl 95hp from 07/2012 to 02/2015 (engine code n47n)- 116de 4cyl 116hp from 09/2011 to 02/2015 (engine code n47n)- 116d 4cyl 116hp from 12/2010 to 02/2015 (engine code n47n)- 118d 4cyl 143cv from 07/2010 until 02/2015 (engine code n47n)- 118xd 4cyl 143hp from 11/2012 until 02/2015 (engine code n47n)- 120d 4cyl 184hp from 07/2010 to 02/2015 (engine code n47n)- 120xd 4cyl 184hp from 07/2010 to 02/2015 (engine code n47n)- 125d 4cyl218hp from 07/2010 until 02/2015 (engine code n47n)- 118d 4cyl 150hp from 06/2014 to 06/2019 (engine code b47d20a)- 118d 4cyl 150hp from 06/2014 until 05/2019 (engine code b47d20a)- 120d 4cyl 190hp from 06/2014 until 06/2019 (engine code b47d20a)- 120xd 4cyl 190hp from 05/2014 to 06/2019 (engine code b47d20a)- 125d 4cyl 224hp from 05/2014 to 06/2019 (engine code b47d20a)
Bmw 1 Series F21 :
- 114d 4cyl 95hp from 07/2012 to 02/2015 (engine code n47n)- 116de 4cyl 116hp from 12/2011 to 02/2015 (engine code n47n)- 116d 4cyl 116hp from 01/2012 to 02/2015 (engine code n47n)- 118d 4cyl 143cv from 07/2010 until 02/2015 (engine code n47n)- 118xd 4cyl 143hp from 11/2012 to 02/2015 (engine code n47n)- 120d 4cyl 184hp from 07/2012 to 02/2015 (engine code n47n)- 120xd 4cyl 184cv from 02/2012 to 02/2015 (engine code n47n)- 125d 4cyl218hp from 07/2010 to 02/2015 (engine code n47n)- 114d 4cyl 95hp from 07/2012 to 02/2015 (engine code n47n)- 118d 4cyl 150hp from 06/2014 to 06/2019 (engine code b47d20a)- 118xd 4cyl 150hp from 05/2014 to 05/2019 (engine code b47d20a)- 120d 4cyl 190hp from 06/2014 to 06/2019 (engine code b47d20a)- 120xd 4cyl 190hp from 06/2014 to 06/2019 (engine code b47d20a)- 125d 4cyl 224hp from 06/2014 to 05/2019 (engine code b47d20a)
Caution! Not suitable for 3-cylinder diesel engine code b37.

Cylinder head screw for Porsche Boxster 986 :

- 986 2.5 Boxster - 204 cv (M96.20) de 1997 a 1999
- 986 2.7 Boxster - 220 cv (M96.22) de 2000 a 2002
- 986 2.7 Boxster - 228 cv (M96.23) de 2003 a 2004
- 986 3.2 Boxster S - 252 cv (M96.21) de 2000 a 2002
- 986 3.2 Boxster S - 260 cv (M96.24) de 2003 a 2004
- 986 3.2 Boxster S550 - 266 cv (M96.24) de 2003 a 2004

Dimensions : M10 x 230 mm

Quantity per vehicle : 24

Sold individually

For Golf 6:
- 1.6 102hp (BSE, BSF, CCSA, CHGA, CMXA)

For Passat 4 (3B2, 3B5):
- 1.6 100hp (AHL, ANA, ARM)

For Polo Classic 6V2:
- 1.6 100hp (AEH, AKL, APF, AUR)

For Polo 9N3:
- 2.0 116hp (BBX)

For New Beetle (1C, 9C):
- 1.6 100hp and 102hp(AWH, AYD, BFS)
- 2.0 115hp (AEG, APK, AQY, AVH, AZG, AZJ, BEJ, BER,BEV, BHP, CBPA)

For New Beetle Cabriolet (1Y):
- 1.6 102hp (BFS)
- 2.0 115hp (AZJ, BDC, BEV, BGD)

For Golf 4:
- 1.4 75hp (AHW, AKQ, APE, AXP, BCA)

For Golf 4:
- 1.6 105hp (ATN, AUS, AZD, BCB)
- 1.6 110hp (BAD)

For Golf 4:
- 1.6 100hp (AEH, AKL, APF)
- 1.6 102hp (AVU)
- 1.8 125hp (AGN -> 107 000)
- 1.8 20v turbo 150hp (AGU -> 048 000)
- 2.0 115hp (AQY, APK, AZH, AZG, AZJ, BEH)

For Golf 5:
- 1.6 102hp (BGU, BSE, BSF, CCSA)

For Golf 4:
- 1.8 125hp (AGN 107 001 -> )
- 1.8 20v turbo 150hp (AGU 048 001 -> )
- 1.8 20v turbo 150hp (ARZ, AUM)
- 1.8 20v turbo 180hp (AUQ)

For Golf 4:
- 1.9 TDi 150hp (ARL)

Set of 10 cylinder head screws for Opel Calibra 2.0L and Kadett 2.0L

Thread: M11
Length: 110mm
Thread pitch: 1.25mm

ATTENTION: Support washers not supplied!

We recommend that you replace the cylinder head bolts on your engine block after opening it for maintenance and/or repair (e.g. replacing the cylinder head gasket). These screws require a specific tightening procedure and cannot be reused on reassembly.

Assignments:
- CALIBRA A (C89) 2.0 i 16V (M07) from 06.1990 to 02.1994
Engine code: C 20 XE with engine no.: up to 14137011

- CALIBRA A (C89) 2.0 i 16V 4x4 (M07) from 06.1990 to 02.1994
Engine code: C 20 XE with engine no.: up to 14137011

- KADETT E 3/5-door (T85) 2.0 GSI 16V (C08, C48, D08, D48) from 12.1987 to 08.1991
Engine code: 20 XE with engine no.: up to 14137011

- KADETT E 3/5-door (T85) 2.0 GSI 16V Cat (C08, C48, D08, D48) from 03.1988-08.1991
Engine code: C 20 XEN° engine: up to 14137011

Cylinder head nut M10 for VW Transporter T25 / T3 from 08/1982 to 07/1992 :
- 1.9 petrol 60hp (DF)
- 1.9 petrol 73hp (SP)
- 1.9 petrol 78hp (DG)
- 1.9 petrol 82hp (DH)
- 1.9 petrol 90hp (GW)
- 2.1 petrol 87hp (SR)
- 2.1 petrol 92hp (SS)
- 2.1 petrol 95hp (MV)
- 2.1 petrol 112hp (DJ)

Cylinder head bolts for Mini: Mini R58 Coupé : - Cooper S JCW 1.6L 211hp from 12/2010 to 07/2012 (engine code N14B16)- Cooper S 1.6L 184hp from 12/2010 to 04/2015 (engine code N18B16)
Mini R59 Roadster : - Cooper S JCW 1.6L 211hp from 05/2011 to 06/2012 (engine code N14B16)- Cooper S 1.6L 184hp from 01/2011 to 04/2015 (engine code N18B16)

Cylinder head bolt for Mini III: Mini R55: - Cooper 1.6L 120hp from 10/2006 to 07/2010 (engine code N12B16)
- Cooper S 1.6L 175hp from 10/2006 to 07/2010 (engine code N14B16)
- Cooper S JCW 1.6L 211hp from 11/2007 to 07/2010 (engine code N14B16)
- One 1.4L 95hp from 08/2008 to 02/2010 (engine code N12B14)
Mini R56: - Cooper 1.6L 120hp from 10/2005 to 08/2010 (engine code N12B16)
- Cooper S 1.6L 175hp from 11/2005 to 07/2010 (engine code N14B16)
- Cooper S JCW 1.6L 211hp from 11/2007 to 07/2010 (engine code N14B16)
- One 1.4L 95hp from 12/2005 to 02/2010 (engine code N12B14)
- One D 1.6L 90hp from 06/2009 to 07/2010 (engine code W16D16)
- Cooper S JCW 1.6L 211hp from 01/2010 to 06/2012 (engine code N14B16)
- Cooper S 1.6L 184hp from 07/2009 to 11/2013 (engine code N18B16)
- Cooper S JCW 1.6L 211hp from 11/2011 to 11/2013 (engine code N18B16)
Mini R57 : - Cooper 1.6L 120hp from 10/2007 to 06/2010 (engine code N12B16)
- Cooper S 1.6L 175hp from 11/2007 to 07/2010 (engine code N14B16)
- Cooper S JCW 1.6L 211hp from 08/2008 to 07/2010 (engine code N14B16)- Cooper S JCW 1.6L 211hp from 01/2010 to 07/2012 (engine code N14B16)
- Cooper S 1.6L 184hp from 06/2009 to 06/2015 (engine code N18B16)
Mini R58: - Cooper S JCW 1.6L 211hp from 12/2010 to 07/2012 (engine code N14B16)- Cooper S 1.6L 184hp from 12/2010 to 04/2015 (engine code N18B16)

Mini R59: - Cooper S JCW 1.6L 211hp from 05/2011 to 06/2012 (engine code N14B16)- Cooper S 1.6L 184hp from 01/2011 to 04/2015 (engine code N18B16)
Mini R60 and R61 : - Cooper 1.6L 122hp from 01/2010 to 10/2016 (engine code N16B16)
- Cooper ALL4 1.6L 122hp from 11/2012 to 09/2016 (engine code N16B16)
- Cooper ALL4 1.6L 122hp from 11/2012 to 10/2016 (engine code N18B16)
- Cooper S 1.6L 184hp from 01/2010 to 08/2014 (engine code N18B16)
- Cooper S 1.6L 190hp from 09/2014 to 10/2016 (engine code N18B16)
- Cooper S ALL4 1.6L 184hp from 01/2010 to 08/2014 (engine code N18B16)
- One 1.6L 98hp from 01/2010 to 09/2016 (engine code N16B16)
- Cooper 1.6L 122hp from 04/2012 to 09/2016 (engine code N16B16)
- Cooper ALL4 1.6L 122hp from 02/2013 to 09/2016 (engine code N16B16)
- Cooper ALL4 1.6L 122hp from 11/2012 to 09/2016 (engine code N18B16)
- Cooper S 1.6L 184hp from 04/2012 to 08/2014 (engine code N18B16)
- Cooper S 1.6L 190hp from 09/2014 to 09/2016 (engine code N18B16)
- Cooper S ALL4 1.6L 184hp from 03/2012 to 08/2014 (engine code N18B16)
- Cooper S ALL4 1.6L 190hp from 09/2014 to 09/2016 (engine code N18B16)
- JCW ALL4 1.6L 218hp from 09/2012 to 09/2016 (engine code N18B16)

For Polo 6N1:
- 1.0 50hp (AER, ALL)

For Polo 6N2:
- 1.4 75hp and 100hp (AFK, AHW, APE, AQQ, AUA, AUB)

For Polo Classic 6V2:
- 1.4 75hp (APE, AUA)
- 1.6 75hp (ALM)

For Polo 9N1:
- 1.2 64hp (AZQ, BME)
- 1.4 75hp and 85hp (AUA, BBY, BKY, AXU)
- 1.4 100hp (AUB, BBZ)

For Polo 9N3:
- 1.4 75hp and 80hp (BKY, BUD)
- 1.4 85hp and 100hp (AXU, BBZ)
- 1.6 105hp (BTS)