Engine gasket set

Victor Reinzgasket paper XL A4pocket
Contains 5 sheets in 21cms x 29.7cms format
Contents :- 1 sheet type AFM 22, thickness 1.2mm, with metal body resistant up to 400°c- 1 sheet type AFM 37/8 in thickness 0.5mm resistant up to 300°c- 1 sheet type AFM 37/8 in thickness 1mm resistant up to 300°c- 1 FS 53 sheet, 0.5mm thick, resistant up to 120°c- 1 sheet type FS 53 in thickness 1mm resistant up to 120°.
Material specifications :- AFM 22: galvanized, spiked sheet-steel backing, coated on both sides with a flexible, asbestos-free material.
- AFM 37/8: high-temperature-resistant aramid fibers and other asbestos substitutes bonded to high-quality elastomers under high pressure and temperature.
- FS53: sealing material based on cellulose fibers, glue-bonded and impregnated.

This gasket kit for VW Golf 1 and Golf 1 Cabriolet will be useful when changing or reconditioning the cylinder head (head gasket replacement).

In this run-in kit, you'll find all the gaskets you need to reassemble your cylinder head:
- Cylinder head gasket
- Valve stem gasket
- Spy gasket
- Manifold gasket (intake and exhaust)
- Rocker cover gasket in cork type (not rubber).

Worn engine gaskets lead to external or internal oil or coolant leaks in the cylinders.

This engine gasket kit is compatible with Volkswagen Golf 1 Sedan and Cabriolet engines:
- 1.6 carburetor 75hp (EW)
- 1.8 carburetor 90hp (EX)
- 1.8 GTi / GLi 98/112hp (2H and DX)

Necessary when replacing or reconditioning the cylinder head, this kit, also known as a break-in kit, will allow you to replace all the gaskets around the top of the engine of your VW Golf 2 or Jetta 2.

This upper engine gasket kit for Golf 2 and Jetta 2 contains :
- Cylinder head gasket
- Valve stem gaskets
- Camshaft gaskets
- Manifold gaskets (intake and exhaust)
- Cylinder head cover gasket in cork version

As the years go by and the engine heats up, the various gaskets made of paper or rubber lose their tightness.
Oil and coolant consumption or leaks (externally or towards the cylinders) indicate the ageing of engine gaskets and the need to replace them on your Volkswagen Golf 2 or Jetta 2.

This top engine gasket kit is compatible with the following engines:
- 1.6 carburetor 75hp (EZ)
- 1.8 carburetor 90hp (GU)
- 1.8 GTi 8s 112hp (EV, PB)

The engine gasket kit for a VW Transporter contains a set of gaskets designed to seal various parts of the engine. These gaskets are essential to prevent oil, coolant or gas leaks, and to ensure that the various engine parts work properly together without losing fluid or causing damage.If you notice any signs of leakage or seal failure, it's important to replace them quickly to avoid more serious engine damage.
This complete kit for the block and the 2 cylinder heads is delivered with spi seals, for VW Transporter T25 / T3 including Syncro version (4x4) from 08/1982 to 07/1992 :- 1.9 (DF, DG, EY, DH, GW, SP)- 2.1 (DJ, MV, SR, SS)

Bag of engine seals for:
- 914 1.8

This set includes gaskets for rocker covers, exhaust/intake, liners, fuel pump bakelite and all those necessary for proper engine operation.These crucial gaskets seal the cylinder head and engine block, preventing oil leaks and ensuring correct compression in the cylinders.Engine gaskets are subjected to pressure, high temperatures and regular expansion cycles. Over time, they can deteriorate, crack, harden or deform, leading to engine leaks and failures. If you notice oil leaks or unusual noises coming from the engine, this may be a sign that the seals are worn and need replacing.This complete set of engine gaskets is suitable for your Bay Window VW Combi from 08/1967 to 07/1979 with Type 4 1.8L and 2.0L engines.

Complete gasket kit for 1200 engine 1192cc 34hp type D. German quality.

For VW Beetle:
- Classic since 08/1960->
- Standard (D engine) since 08/1965->

Complete gasket kit for 1200 engine 1192cc. German quality.

For VOLKSWAGEN Combi Split Brazil (1957-1975)

To engine type D 08/60->
Cylinder capacity 1192cm3

For VOLKSWAGEN Combi Split Brazil (1957-1975)

High engine gasket set for BMW series 3 E30 and series 5 E34 6 cylinders with M20 engine:

E30 Saloon 4 doors:
- 325i 6cyl 170cv phase 1 from 03/1985 to 08/1987 (engine code M20B25)
- 325i 6cyl 170cv phase 2 from 09/1987 to 01/1991 (engine code M20B25)
- 325ix 6cyl 170cv phase 1 from 11/1985 to 08/1987 (engine code M20B25)
- 325ix 6cyl 170cv phase 2 from 09/1987 to 12/1990 (engine code M20B25)

E30 Coupe 2 doors:
- 325i 6cyl 170cv phase 1 from 03/1985 to 08/1987 (engine code M20B25)
- 325i 6cyl 170cv phase 2 from 09/1987 to 03/1991 (engine code M20B25)
- 325ix 6cyl 170cv phase 1 from 02/1985 to 08/1987 (engine code M20B25)
- 325ix 6cyl 170cv phase 2 from 09/1987 to 02/1991 (engine code M20B25)

E30 Touring:
- 325i 6cyl 170cv from 07/1987 to 04/1993 (engine code M20B25)
- 325ix cat. 6cyl 170cv from 01/1988 to 12/1992 (engine code M20B25)

E30 Convertible:
- 325i 6cyl 170cv from 07/1985 to 01/1993 (engine code M20B25)

###

E34 Saloon:
- 525i 170hp phase 1 from 06/1987 to 04/1990 (engine code M20B25)

These quality gaskets will allow you to refurbish the sealing of the upper part of your engine.

This super complete engine gasket kit GLASER for 2CV Vans with 602cc engines is compatible with all 2cv models and derivatives with 602cc engines

A complete GLASER quality kit, it includes all the gaskets required to rebuild a 602cc engine

- a choice of 2 types of gaskets: 2 flat gaskets (70->78) and 2 double lip gaskets with notch (78->)
- 1 front crankshaft seal - 30x42x8 mm
- 1 rear crankshaft seal for 602 engine - 56x69x10 mm
(With the exception of this seal, the kit is compatible with a 435cc engine, add 1 CV10772 gasket for this displacement)
- 1 oil breather seal
- 2 inlet seals
- 2 exhaust gaskets
- 2 rocker arm cover seals
- 4 valve stem seals
- 1 large oil pump O-ring
- 1 can tail centring seal
- 3 double copper seals for the oil circuit
- 2 copper seals for engine drain
- 2 copper gasket for can drain
- 1 Oil pump seal
- 2 refrigerator seals
- 2 paper seals 6 cardan holes

This super complete GLASER engine gasket kit for 602cc engines is compatible with all AMI 6 and AMI 8 cars with M4 and M28 602cc engines

A complete GLASER quality kit that includes all the gaskets you need to rebuild a 602cc engine

- a choice of 2 types of bezelled gasket: 2 flat bezel gaskets (70->78) and 2 double lip bezel gaskets with notches (78->)
- 1 front crankshaft gasket - 30x42x8 mm
- 1 rear crankshaft gasket for 602 engine - 56x69x10 mm
(except for this gasket the kit is compatible with a 435cc engine, so add 1 gasket CV10772 for this displacement)
- 1 oil breather gasket
- 2 intake seals
- 2 exhaust gaskets
- 2 rocker arm cover seals
- 4 valve stem seals
- 1 large oil pump O-ring
- 1 gearbox rear joint gasket
- 3 double copper seals for the oil circuit
- 2 copper seals for engine bleeding
- 2 copper gaskets for gearbox bleeding
- 1 oil pump gasket
- 2 refrigerator seals
- 2 driveshaft 6-hole paper gaskets

This GLASER exhaust gasket for DYANE and Acadiane models with 602cc engines is compatible with all DYANE and Acadiane vehicles with 602cc engines.

A complete GLASER quality kit, it includes all the gaskets required to rebuild a 602cc engine

- a choice of 2 types of gasket: 2 flat gaskets (70->78) and 2 double lip gaskets with notch (78->)
- 1 front crankshaft seal - 30x42x8 mm
- 1 rear crankshaft seal for 602 engine - 56x69x10 mm
(With the exception of this seal, the kit is compatible with a 435cc engine, add 1 CV10772 gasket for this displacement)
- 1 oil breather seal
- 2 inlet seals
- 2 exhaust gaskets
- 2 rocker arm cover seals
- 4 valve stem seals
- 1 large oil pump O-ring
- 1 gearbox tail centring seal
- 3 double copper seals for the oil circuit
- 2 copper seals for engine drain
- 2 copper gasket for can drain
- 1 Oil pump seal
- 2 refrigerator seals
- 2 paper seals 6 cardan holes

This super complete engine gasket kit GLASER for Mehari is compatible with all Meharis.

A complete GLASER quality kit, it includes all the gaskets required to rebuild a 602cc engine

- a choice of 2 types of gasket: 2 flat gaskets (70->78) and 2 double lip gaskets with notch (78->)
- 1 front crankshaft seal - 30x42x8 mm
- 1 rear crankshaft seal for 602 engine - 56x69x10 mm
(With the exception of this seal, the kit is compatible with a 435cc engine, add 1 CV10772 gasket for this displacement)
- 1 oil breather seal
- 2 inlet seals
- 2 exhaust gaskets
- 2 rocker arm cover seals
- 4 valve stem seals
- 1 large oil pump O-ring
- 1 gearbox tail centring seal
- 3 double copper seals for the oil circuit
- 2 copper seals for engine drain
- 2 copper gasket for can drain
- 1 Oil pump seal
- 2 refrigerator seals
- 2 paper seals 6 cardan holes

This super complete engine gasket kit GLASER for 602cc engines is compatible with all 2cv models and derivatives with 602cc engines

A complete GLASER quality kit, it includes all the gaskets required to rebuild a 602cc engine

- a choice of 2 types of gaskets: 2 flat gaskets (70->78) and 2 double lip gaskets with notch (78->)
- 1 front crankshaft seal - 30x42x8 mm
- 1 rear crankshaft seal for 602 engine - 56x69x10 mm
(With the exception of this seal, the kit is compatible with a 435cc engine, add 1 CV10772 gasket for this displacement)
- 1 oil breather seal
- 2 inlet seals
- 2 exhaust gaskets
- 2 rocker arm cover seals
- 4 valve stem seals
- 1 large oil pump O-ring
- 1 can tail centring seal
- 3 double copper seals for the oil circuit
- 2 copper seals for engine drain
- 2 copper gasket for can drain
- 1 Oil pump seal
- 2 refrigerator seals
- 2 paper seals 6 cardan holes

For Golf 2, Jetta 2, Passat & Corrado :
- 1.8 16s 129cv, 136cv & 139cv (KR, PL)

These bags include all the seals needed to reassemble your cylinder head: valve stem, manifold and rocker cover seals (except cylinder head gasket).

For Transporter T25/T3, 08/1984 ->07/1992
- 1.6 Diesel 70hp (JX)

For Golf 1 :
- 1.6 Turbo Diesel 70cv (CY)

For Golf 2 :
- 1.6 Turbo Diesel 70cv (JR)
- 1.6 Turbo Diesel 80cv (RA, SB)

This complete engine gasket kit for Alpine A110 Berlinette (01/1963-02/1968) - 956 and 1108cc is true to original.

This engine gasket kit for early-generation Alpine A110s is compatible with berlinettes and GT4 coupes with type 688 and 689 engines. It includes all the gaskets needed to rebuild an engine.

Compatible models:

- A110 Berlinetta - type 956 (01/1963-11/1963)
- A110 GT4 Coupé - Type 956 (03/1963-01/1964)
- Berlinette A110 - type 1100 (03/1963-01/1964)
- Berlinette A110 1100 V70 - type 1100VA (01/1963-08/1969)
- Berlinette A110 1100 75 - type 1100VA (28/02/1968) - Chassis n°3950
- A110 GT4 Coupé - Type 1100 L VA (10/1963-1969)