Side skirt

DANSK Extrior left side skirt for Porsche 911 and 912 Coupe and Targa :

-> Porsche 912 :
- 912 1.6 from 1966 to 1968

-> Porsche 911 :
- 911 2.0 from 1965 to 1967
- 911 2.0 T of 1968
- 911 2.0 L of 1968
- 911 2.0 S from 1967 to 1968

Part

Left-hand inner rocker panel for Fiat 500 F, L and R (1965-1975)
For models listed below:- Fiat 500 F from 1965 to 1968- Fiat 500 L from 1968 to 1972- Fiat 500 R from 1972 to 1975
Left side (driver)Italian manufacture
Part covered with black protective paint, often scratched during transport/storage, must be removed before priming and painting.Made from old molds, adjustments may be necessary to fit your vehicle perfectly.
Whatever the body components, origin and quality, a "blank assembly" is essential to check and correct any adjustments before painting.

Right-hand jack support for Fiat 500 F, L and R (165-1975)

mounts on right (passenger) side

Made in Italy

For models listed below:
- Fiat 500 F from 1965 to 1968
- Fiat 500 L from 1968 to 1972
- Fiat 500 R from 1972 to 1975

Made from old molds, adjustments may be necessary to fit your vehicle perfectly.

Whatever the body components, origin and quality, a "blank assembly" is essential to check and correct any adjustments before painting.

M5 typerocker panel for Bmw 5 Series:
- Compatible with all Bmw 5 Series E34 Sedan and Touring versions from 07/1987 to 06/1996, all engines included.

Straight sheet metal rocker panel for Volkswagen Golf 7
For VW Golf 7 all 5-door models, sedan and station wagon
Right side (passenger)

Right running board panel for VOLKSWAGEN Transporter T4 from 1991 to 2003.

External underbody reinforcement plate for VW Transporter T25 / T3, Bus, Van, caravelle, Joker, Westfalia, Syncro (4x4) from 05/1979 to 07/1992.Weld-in, for side opposite sliding door.Dimensions: approx. 123 x 5 x 2 cmTop quality, thick as original.

Suitable for all Golf 2 models
Two needed per vehicle

DANSK Inner right door bottom sheet metal for Porsche 356 pré-A, A, B T5 and B T6 :

-> Porsche 356 pre-A :
- 356 1100 - 40 hp (369) from 1950 to 1954
- 356 1300 - 44 hp (506 and 506/2) from 1951 to 1955
- 356 1300 S - 60 hp (589 and 589/2) from 1954 to 1955
- 356 1500 Cabriolet - 60 cv (527) from 1952
- 356 1500 - 55 hp (546 and 546/2) from 1953 to 1955
- 356 1500 S - 70 hp (528 and 528/2) from 1953 to 1955

-> Porsche 356 A :
- 356 A 1300 - 44 hp (506/1) from 1956 to 1957
- 356 A 1300 S - 60 hp (589/2) from 1956 to 1957
- 356 A 1600 - 60 hp (616/1) from 1956 to 1959
- 356 A 1600 S - 75 hp (616/2) from 1956 to 1959

-> Porsche 356 B T5 :
- 356 B 1600 - 60 hp (616/1) from 1960 to 1961
- 356 B 1600 S - 75 hp (616/2) from 1960 to 1961
- 356 B 1600 Super 90 - 90 hp (616/7) from 1960 to 1961

-> Porsche 356 B T6 :
- 356 B 1600 - 60 hp (616/1) from 1962 to 1963
- 356 B 1600 S - 75 hp (616/12) from 1962 to 1963
- 356 B 1600 Super 90 - 90 hp (616/7) from 1962 to 1963

Also suitable for Carrera versions

Passenger side sill,
Replacement part in sheet metal to be welded.

For VW Polo 6N1 and 6N2 in 5 doors until October 2000

Rocker panel under right rear door for VW Combi Split Pick-up double cab up to 07/1967.

Left outer rocker panel for Fiat 500 F, L and R (1965-1975)
For models listed below:- Fiat 500 F from 1965 to 1968- Fiat 500 L from 1968 to 1972- Fiat 500 R from 1972 to 1975
Left side (driver)Italian manufacture
Part covered with black protective paint, often scratched during transport/storage, must be removed before priming and painting.Made from old molds, adjustments may be necessary to fit your vehicle perfectly.
Whatever the body components, origin and quality, a "blank assembly" is essential to check and correct any adjustments before painting.

This right-hand sill for 2cv vans - 100cm is high quality.

This right-hand rail is made of electro-galvanised steel. It includes the fastening of the safety belts.
It is perfectly designed to fit all types of 2CV vans, so does not require any adaptation.

Front left sill panel (in front of cargo door) for VW Transporter T25/T3 Pick-Up single cab.All models including Syncro (4x4) from 05/1979 to 07/1992.Original Volkswagen Classic Parts.

Outer rocker panel + inner stiffener welded under the side doors, loading side, left or right-hand.

For Combi Split 1950 ->07/1967

This right-hand sill for 2cvs (04/1970-07/1990) is high quality.

This right-hand rail for 2cv is made of electro-galvanised steel. Since April 1970, in addition to the wing attachment, it includes the seatbelt attachment. Perfectly designed to fit 2cv saloons, it can be adapted to 2cv vans by shortening it.

Inner right-hand rocker panel reinforcement. Original quality.

For VW Kombi Bay Window T2
Years:08/1967 -> 07/1979

Rocker panel stiffener for Porsche 356 pré-A, A and B T5 :

-> Porsche 356 pre-A :
- 356 1100 - 40 hp (369) from 1950 to 1954
- 356 1300 - 44 hp (506 and 506/2) from 1951 to 1955
- 356 1300 S - 60 hp (589 and 589/2) from 1954 to 1955
- 356 1500 Cabriolet - 60 cv (527) from 1952
- 356 1500 - 55 hp (546 and 546/2) from 1953 to 1955
- 356 1500 S - 70 hp (528 and 528/2) from 1953 to 1955

-> Porsche 356 A :
- 356 A 1300 - 44 hp (506/1) from 1956 to 1957
- 356 A 1300 S - 60 hp (589/2) from 1956 to 1957
- 356 A 1600 - 60 hp (616/1) from 1956 to 1959
- 356 A 1600 S - 75 hp (616/2) from 1956 to 1959

-> Porsche 356 B T5 :
- 356 B 1600 - 60 hp (616/1) from 1960 to 1961
- 356 B 1600 S - 75 hp (616/2) from 1960 to 1961
- 356 B 1600 Super 90 - 90 hp (616/7) from 1960 to 1961

Suitable for the front left or rear right sides.

Sold individually

Internal repair plate for lower sliding side door for VW Transporter T25 / T3, Bus, Van, Caravelle, Carat, Joker, Syncro (4x4) from 05/1979 to 07/1992.