Thermal chock

This thermal spacer for WEBER 45 DCOE carburetor - Bakelite 8mm is made by MECATECHNIC.

This spacer for the WEBER 45 DCOE carburetor is machined from an old-fashioned laminated phenolic resin that is particularly stable to heat, cold and contact with potentially corrosive liquids and oils, and will not warp.

A thermal shim isolates the carburetor from the heat generated by the manifold. Prevents deformation of the carburettor baseplate, limits vapor lock and self-combustion and prevents fuel from "boiling" in the carburettor bowl.

Requires two shims per carburetor and 2 UC40264 O-rings per shim to fit (not supplied).

This thermal spacer for Solex 26 carburetor - Bakelite 5mm is made by MECATECHNIC.

This spacer for the Solex 26 carburetor is machined from an old-fashioned phenolic resin laminate that is particularly stable to heat, cold and contact with potentially corrosive liquids and oils, and will not warp.

A thermal shim isolates the carburetor from the heat generated by the manifold. Prevents deformation of the carburettor baseplate and limits the effects of vapor lock and self-combustion, preventing fuel from "boiling" in the carburettor bowl.

Requires two base gaskets for installation (not supplied).

This thermal spacer for Solex 28 carburetor - Bakelite 5mm is made by MECATECHNIC.

This spacer for the Solex 28 carburetor is machined from an old-fashioned phenolic resin laminate that is particularly stable to heat, cold and contact with potentially corrosive liquids and oils, and will not warp.

A thermal shim isolates the carburetor from the heat generated by the manifold. Prevents deformation of the carburettor baseplate and limits the effects of vapor lock and self-combustion, preventing fuel from "boiling" in the carburettor bowl.

Requires two base gaskets for installation (not supplied).

This thermal spacer for Solex 40 carburetor - Bakelite 5mm is made by MECATECHNIC.

This spacer for the Solex 40 carburetor is machined from an old-fashioned phenolic resin laminate that is particularly stable to heat, cold and contact with potentially corrosive liquids and oils, and will not warp.

A thermal shim isolates the carburetor from the heat generated by the manifold. Prevents deformation of the carburettor baseplate and limits the effects of vapor lock and self-combustion, preventing fuel from "boiling" in the carburettor bowl.

Requires two base gaskets for installation (not supplied).

Compatible carburetors:
- SOLEX 40 PICS
- SOLEX 40 PICS-2
- SOLEX 40 PICS-3
- SOLEX 40 RAIP

This RFPAI-FAIP - Bakelite 5mm thermal shim for Solex 46 carburetors is made by MECATECHNIC.

This spacer for the Solex 46 carburetor is machined from an old-style laminated phenolic resin that is particularly stable to heat, cold and contact with potentially corrosive liquids and oils, and will not warp.

A thermal shim isolates the carburetor from the heat generated by the manifold. Prevents deformation of the carburettor baseplate and limits the effects of vapor lock and self-combustion, preventing fuel from "boiling" in the carburettor bowl.

Requires two base gaskets for installation (not supplied).

Compatible carburetors:
- SOLEX 46 FAIP
- SOLEX 46 RFPAI

6mm thermal shim for Weber carburetors

For the following Weber carburetors:
DIR
DGV
DGAV
DCD

The thermal shim isolates the carburettor from the heat generated by the engine.
Requires two base gaskets for installation (not supplied)

This thermal spacer for WEBER 40 DCOE carburetor - Bakelite 8mm is made by MECATECHNIC.

This spacer for the WEBER 40 DCOE carburetor is machined from an old-style laminated phenolic resin that is particularly stable to heat, cold and contact with potentially corrosive liquids and oils, and will not warp.

A thermal shim isolates the carburetor from the heat generated by the manifold. Prevents deformation of the carburettor baseplate, limits vapor lock and self-combustion and prevents fuel from "boiling" in the carburettor bowl.

Requires two shims per carburetor and 2 UC40264 O-rings per shim to fit (not supplied).

This thermal shim for Solex 34 PICT 4 carburetor - Bakelite 5mm is made by MECATECHNIC.
This spacer for the Solex 34 PICT 4 carburetor is machined from an old-style laminated phenolic resin that is particularly stable to heat, cold and contact with potentially corrosive liquids and oils, and will not warp.
A thermal shim isolates the carburetor from the heat generated by the manifold. Prevents deformation of the carburettor baseplate and limits the effects of vapor lock and self-combustion, preventing fuel from "boiling" in the carburettor bowl.
Requires two base gaskets for installation (not supplied).

This thermal spacer for Solex 34 and 35 carburetors - Bakelite 5mm is made by MECATECHNIC.

This spacer for Solex 34 and 35 carburetors is machined from an old-fashioned laminated phenolic resin that is particularly stable to heat, cold and contact with potentially corrosive liquids and oils, and will not warp.

A thermal shim isolates the carburetor from the heat generated by the manifold. Prevents deformation of the carburettor baseplate and limits the effects of vapor lock and self-combustion, preventing fuel from "boiling" in the carburettor bowl.

Requires two base gaskets for installation (not supplied).

This Solex 32 PBIC- Bakelite 5mm carburetor spacer is made by MECATECHNIC.
This spacer for the Solex 32 PBIC carburetor is machined from an old-fashioned laminated phenolic resin that is particularly stable to heat, cold and contact with potentially corrosive liquids and oils, and will not warp.
A thermal shim isolates the carburetor from the heat generated by the manifold. Prevents deformation of the carburettor baseplate and limits the effects of vapor lock and self-combustion, preventing fuel from "boiling" in the carburettor bowl.
Requires two base gaskets for installation (not supplied).

This Solex 32 EISA- Bakelite 5mm carburetor spacer is made by MECATECHNIC.
This spacer for the Solex 32 EISA carburetor is machined from an old-fashioned laminated phenolic resin that is particularly stable to heat, cold and contact with potentially corrosive liquids and oils, and will not warp.
A thermal shim isolates the carburetor from the heat generated by the manifold. Prevents deformation of the carburettor baseplate and limits the effects of vapor lock and self-combustion, preventing fuel from "boiling" in the carburettor bowl.
Requires two base gaskets for installation (not supplied).

This thermal spacer for Solex 28 PICT2 carburetor - Bakelite 5mm is made by MECATECHNIC.
This spacer for the Solex 28 PICT2 carburetor is machined from an old-style laminated phenolic resin that is particularly stable to heat, cold and contact with potentially corrosive liquids and oils, and will not warp.
A thermal shim isolates the carburetor from the heat generated by the manifold. Prevents deformation of the carburettor baseplate and limits the effects of vapor lock and self-combustion, preventing fuel from "boiling" in the carburettor bowl.
Requires two base gaskets for installation (not supplied).

This thermal spacer for Solex 32-34 PDSIT carburetor - Bakelite 5mm is made by MECATECHNIC.
This spacer for the Solex 32-34 PDSIT carburetor is machined from an old-fashioned phenolic resin laminate that is particularly stable to heat, cold and contact with potentially corrosive liquids and oils, and will not warp.
A thermal shim isolates the carburetor from the heat generated by the manifold. Prevents deformation of the carburettor baseplate and limits the effects of vapor lock and self-combustion, preventing fuel from "boiling" in the carburettor bowl.
Requires two base gaskets for installation (not supplied).

Thermal shim for Weber 36 TL, TLP carburettors
For Weber 36 TL and TLP carburetors, all models
This carburetor insert isolates the carburetor from the heat generated by the engine.
New original Weber part

This thermal spacer for WEBER 32/36DGV carburetors - Bakelite 5mm is made by MECATECHNIC.
This spacer for WEBER 32/36DGV carburetors is machined from an old-fashioned phenolic resin laminate that is particularly stable to heat, cold and contact with potentially corrosive liquids and oils, and will not warp.
A thermal shim isolates the carburetor from the heat generated by the manifold. Prevents deformation of the carburettor baseplate and limits the effects of vapor lock and self-combustion, preventing fuel from "boiling" in the carburettor bowl.
Requires two base gaskets for installation (not supplied).

Stainless steel heat shield for Weber DCOE and DCO/SP carburetors .

On some non-cross flow engines, the carburetors are located just below the exhaust manifold. This generates a great deal of heat, which can interfere with the carburetor's operation, and that of the intake system in general.

Thanks to this 1.6mm-thick stainless steel shield, the heat is deflected, and intake disturbances are reduced.

Quality part

Sold individually

In some cases, it may be necessary to cut the sheet metal slightly to allow the throttle linkage to operate correctly over its full range.

This thermal spacer for WEBER 40 and 42 DCNF carburetors - Bakelite 5mm is made by MECATECHNIC.
This spacer for WEBER 40 and 42 DCNF carburetors is machined from an old-style laminated phenolic resin that is particularly stable to heat, cold and contact with potentially corrosive liquids and oils, and will not warp.
A thermal shim isolates the carburetor from the heat generated by the manifold. Prevents deformation of the carburettor baseplate and limits the effects of vapor lock and self-combustion, preventing fuel from "boiling" in the carburettor bowl.

This thermal spacer for Solex 30 carburetor - Bakelite 5mm is made by MECATECHNIC.

This spacer for the Solex 30 carburetor is machined from an old-fashioned phenolic resin laminate that is particularly stable to heat, cold and contact with potentially corrosive liquids and oils, and will not warp.

A thermal shim isolates the carburetor from the heat generated by the manifold. Prevents deformation of the carburettor baseplate and limits the effects of vapor lock and self-combustion, preventing fuel from "boiling" in the carburettor bowl.

Requires two base gaskets for installation (not supplied).

This thermal spacer for WEBER 32-34 DMTL carburetors - Bakelite 8mm is made by MECATECHNIC.

This spacer for WEBER 32-34 DMTL carburetors is machined from an old-fashioned phenolic resin laminate that is particularly stable to heat, cold and contact with potentially corrosive liquids and oils, and will not warp.

A thermal shim isolates the carburetor from the heat generated by the manifold. Prevents deformation of the carburettor baseplate and limits the effects of vapor lock and self-combustion, preventing fuel from "boiling" in the carburettor bowl.

Requires paper gaskets for installation (not supplied).

This thermal spacer for Solex 32 and 34 BISCA and PBIC carburetors - Bakelite 5mm is made by MECATECHNIC.
This spacer for Solex 32 and 34 BISCA and PBIC carburetors is machined from an old-style laminated phenolic resin that is particularly stable to heat, cold and contact with potentially corrosive liquids and oils, and will not warp.
A thermal shim isolates the carburetor from the heat generated by the manifold. Prevents deformation of the carburettor baseplate and limits the effects of vapor lock and self-combustion, preventing fuel from "boiling" in the carburettor bowl.
Requires two base gaskets for installation (not supplied).